diff options
28 files changed, 0 insertions, 1825 deletions
diff --git a/docs/INSTALL.rst b/docs/INSTALL.rst deleted file mode 100644 index 6c321846..00000000 --- a/docs/INSTALL.rst +++ /dev/null @@ -1,34 +0,0 @@ -.. this work is licensed under a creative commons attribution 4.0 international -.. license. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) opnfv, national center of scientific research "demokritos" and others. - -============================ -samplevf Installation Guide -============================ - -Introduction -============ -This project provides a placeholder for various sample VNF (Virtual Network Function) -development which includes example reference architecture and optimization methods -related to VNF/Network service for high performance VNF - -The sample VNFs are Open Source approximations* of Telco grade VNF’s using -optimized VNF + NFVi Infrastructure libraries, with Performance Characterization -of Sample† Traffic Flows. - -:: - - * Not a commercial product. Encourage the community to contribute and close the feature gaps. - † No Vendor/Proprietary Workloads - -VNF supported -============= - - - Carrier Grade Network Address Translation (CG-NAT) VNF - - Firewall (vFW) VNF - - Access Control List (vACL) VNF - -Please refer docs folder for individual VNF Installation guide. - -Note:- Each VNF should include a installation document explain the process to install and run VNF. diff --git a/docs/RELEASE_NOTES.rst b/docs/RELEASE_NOTES.rst deleted file mode 100644 index fa9ab919..00000000 --- a/docs/RELEASE_NOTES.rst +++ /dev/null @@ -1,32 +0,0 @@ -.. this work is licensed under a creative commons attribution 4.0 international -.. license. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) opnfv, national center of scientific research "demokritos" and others. - -========================== -samplevnf Release Notes -========================== - -Introduction -============ -This project provides a placeholder for various sample VNF (Virtual Network Function) -development which includes example reference architecture and optimization methods -related to VNF/Network service for high performance VNFs. - -The sample VNFs are Open Source approximations* of Telco grade VNF’s using -optimized VNF + NFVi Infrastructure libraries, with Performance Characterization -of Sample† Traffic Flows. - -:: - - * Not a commercial product. Encourage the community to contribute and close the feature gaps. - † No Vendor/Proprietary Workloads - -VNF supported -============= - - - Carrier Grade Network Address Translation (CG-NAT) VNF - - Firewall (vFW) VNF - - Access Control List (vACL) VNF - -Please refer docs folder for individual VNF release notes. diff --git a/docs/development/design/index.rst b/docs/development/design/index.rst deleted file mode 100644 index a2a90560..00000000 --- a/docs/development/design/index.rst +++ /dev/null @@ -1,4 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. diff --git a/docs/development/overview/index.rst b/docs/development/overview/index.rst deleted file mode 100644 index 284effb7..00000000 --- a/docs/development/overview/index.rst +++ /dev/null @@ -1,15 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -============================================= -OPNFV <Project Name> <Release Name> Overview -============================================= - -For example, the title might be "Qtip Danube Overview" - -.. toctree:: - :maxdepth: 1 - - overview diff --git a/docs/development/overview/overview.rst b/docs/development/overview/overview.rst deleted file mode 100644 index 498dc066..00000000 --- a/docs/development/overview/overview.rst +++ /dev/null @@ -1,16 +0,0 @@ -============================================== -OPNFV <Release Name> <Project Name> Overview -============================================== - -.. contents:: - :depth: 3 - :local: - -Introduction ----------------- -Describing the components and behaviours in a manner that helps people understand the platform and how to work with it - -Upgrades from <Previous Release> ------------------------------------ -<optional, required if there's a previous release for the project> -Describe the new features diff --git a/docs/development/requirements/index.rst b/docs/development/requirements/index.rst deleted file mode 100644 index a2a90560..00000000 --- a/docs/development/requirements/index.rst +++ /dev/null @@ -1,4 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. diff --git a/docs/index.rst b/docs/index.rst deleted file mode 100644 index 050fa670..00000000 --- a/docs/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -#################### -samplevnf -#################### - -.. toctree:: - :numbered: - :maxdepth: 2 - - RELEASE_NOTES.rst - INSTALL.rst - vCGNAPT/index.rst - vFW/index.rst - vACL/index.rst diff --git a/docs/release/configguide/feature.configuration.rst b/docs/release/configguide/feature.configuration.rst deleted file mode 100644 index 2eb79f22..00000000 --- a/docs/release/configguide/feature.configuration.rst +++ /dev/null @@ -1,28 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -Abstract -======== -This document provides information on how to install the SampleVNF -features in OPNFV. - -SampleVNF feature desciription -======================== - -Hardware requirements -===================== - -Bare metal deployment on (OPNFV) lab -------------------------------------------- - -Virtual deployment ------------------- - - -Download the installer source code and artifact ------------------------------------------------ - -Installation procedures ------------------------ - diff --git a/docs/release/configguide/featureconfig.rst b/docs/release/configguide/featureconfig.rst deleted file mode 100644 index 45f9a5fc..00000000 --- a/docs/release/configguide/featureconfig.rst +++ /dev/null @@ -1,35 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -======== -Abstract -======== -Add a brief introduction to configure OPNFV with this specific feature including -dependancies on platform components, this description should be at a level that -will apply to any installer providing the pre-requisite components. - -.. contents:: - :depth: 3 - :local: - -Pre-configuration activities -============================ -Describe specific pre-configuration activities. This should include ensuring the -right components are installed by the installation tools as required for your -feature to function. Refer to the previous installer configuration chapters, -installations guide and release notes - - -Hardware configuration -====================== -Describe the hardware configuration needed for this specific feature - - -Feature configuration -===================== -Describe the procedures to configure your feature on the platform in order -that it is ready to use according to the feature instructions in the platform -user guide. Where applicable you should add content in the postinstall.rst -to validate the feature is configured for use. -(checking components are installed correctly etc...) diff --git a/docs/release/configguide/index.rst b/docs/release/configguide/index.rst deleted file mode 100644 index 7f7b2d9c..00000000 --- a/docs/release/configguide/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -********************************** -SampleVNF Configuration Guide -********************************** - -.. toctree:: - :maxdepth: 1 - - featureconfig - postinstall diff --git a/docs/release/configguide/postinstall.rst b/docs/release/configguide/postinstall.rst deleted file mode 100644 index 296d3023..00000000 --- a/docs/release/configguide/postinstall.rst +++ /dev/null @@ -1,39 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -************************************* -<Project> Post Installation Procedure -************************************* - -Add a brief introduction to the methods of validating the installation -according to this specific installer or feature. - -.. contents:: - :depth: 3 - :local: - - -Automated post installation activities -====================================== -Describe specific post installation activities performed by the OPNFV -deployment pipeline including testing activities and reports. Refer to -the relevant testing guides, results, and release notes. - -note: this section should be singular and derived from the test projects -once we have one test suite to run for all deploy tools. This is not the -case yet so each deploy tool will need to provide (hopefully very simillar) -documentation of this. - - -<Project> post configuration procedures -======================================= -Describe any deploy tool or feature specific scripts, tests or procedures -that should be carried out on the deployment post install and configuration -in this section. - - -Platform components validation -============================== -Describe any component specific validation procedures necessary for your -deployment tool in this section. diff --git a/docs/release/installation/index.rst b/docs/release/installation/index.rst deleted file mode 100644 index f7bb1907..00000000 --- a/docs/release/installation/index.rst +++ /dev/null @@ -1,10 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -*************************************** -SampleVNF Installation Instruction -*************************************** - -.. toctree:: - :maxdepth: 1 diff --git a/docs/release/userguide/feature.userguide.rst b/docs/release/userguide/feature.userguide.rst deleted file mode 100644 index 62259c7f..00000000 --- a/docs/release/userguide/feature.userguide.rst +++ /dev/null @@ -1,23 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -.. contents:: - :depth: 3 - :local: - -<Feature> description -===================== -.. Describe the specific features and how it is realised in the scenario in a brief manner -.. to ensure the user understand the context for the user guide instructions to follow. - -<Feature> capabilities and usage -================================ -.. Describe the specific capabilities and usage for <XYZ> feature. -.. Provide enough information that a user will be able to operate the feature on a deployed scenario. - -<Feature and API usage guidelines and example> -============================================== -.. Describe with examples how to use specific features, provide API examples and details required to -.. operate the feature on the platform. - diff --git a/docs/release/userguide/index.rst b/docs/release/userguide/index.rst deleted file mode 100644 index 8dba05e4..00000000 --- a/docs/release/userguide/index.rst +++ /dev/null @@ -1,23 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -===================== -SampleVNF User Guide -===================== - -.. The feature user guide should provide an OPNFV user with enough information to -.. use the features provided by the feature project in the supported scenarios. -.. This guide should walk a user through the usage of the features once a scenario -.. has been deployed and is active according to the installation guide provided -.. by the installer project. - -.. toctree:: - :maxdepth: 1 - - feature.userguide -.. The feature.userguide.rst file should contain the text for this document -.. additional documents can be added to this directory and added in the right order -.. to this file as a list below. - - diff --git a/docs/testing/user/configguide/configguide.rst b/docs/testing/user/configguide/configguide.rst deleted file mode 100644 index e3867864..00000000 --- a/docs/testing/user/configguide/configguide.rst +++ /dev/null @@ -1,5 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -.. OPNFV SAMPLEVNF Documentation configure guide file. diff --git a/docs/testing/user/configguide/index.rst b/docs/testing/user/configguide/index.rst deleted file mode 100644 index 1998be3b..00000000 --- a/docs/testing/user/configguide/index.rst +++ /dev/null @@ -1,5 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -.. OPNFV SAMPLEVNF Documentation master file. diff --git a/docs/testing/user/userguide/vACL/INSTALL.rst b/docs/testing/user/userguide/vACL/INSTALL.rst deleted file mode 100644 index 7f21fc1f..00000000 --- a/docs/testing/user/userguide/vACL/INSTALL.rst +++ /dev/null @@ -1,233 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -============================ -vACL - Installation Guide -============================ - -vACL Compilation -=================== - -After downloading (or doing a git clone) in a directory (samplevnf) - -------------- -Dependencies -------------- - -- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05): Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/) -- libpcap-dev -- libzmq -- libcurl - ---------------------- -Environment variables ---------------------- -Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk - -:: - - export RTE_SDK=<dpdk directory> - export RTE_TARGET=x86_64-native-linuxapp-gcc - -This is done by vnf_build.sh script. - -Auto Build: -=========== -$ ./tools/vnf_build.sh in samplevnf root folder - -Follow the steps in the screen from option [1] --> [9] and select option [8] -to build the vnfs. -It will automatically download selected DPDK version and any required patches -and will setup everything and build vACL VNFs. - -Following are the options for setup: - -:: - - ---------------------------------------------------------- - Step 1: Environment setup. - ---------------------------------------------------------- - [1] Check OS and network connection - [2] Select DPDK RTE version - - ---------------------------------------------------------- - Step 2: Download and Install - ---------------------------------------------------------- - [3] Agree to download - [4] Download packages - [5] Download DPDK zip - [6] Build and Install DPDK - [7] Setup hugepages - - ---------------------------------------------------------- - Step 3: Build VNFs - ---------------------------------------------------------- - [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay) - - [9] Exit Script - -An vACL executable will be created at the following location -samplevnf/VNFs/vACL/build/vACL - - -Manual Build: -============= -1. Download DPDK supported version from dpdk.org - - - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip - -2. unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 - (Not required for other DPDK versions) - - - cd dpdk - - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch - - - build dpdk - - - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc - - cd x86_64-native-linuxapp-gcc - - make - - - Setup huge pages - - - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified - explicitly and can also be optionally set as the default hugepage - size for the system. For example, to reserve 8G of hugepage memory - in the form of eight 1G pages, the following options should be passed - to the kernel: - * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048 - - Add this to Go to /etc/default/grub configuration file. - - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048" - to the GRUB_CMDLINE_LINUX entry. - -3. Setup Environment Variable - - - export RTE_SDK=<samplevnf>/dpdk - - export RTE_TARGET=x86_64-native-linuxapp-gcc - - export VNF_CORE=<samplevnf> - - or using ./tools/setenv.sh - -4. Build vACL VNFs - - - cd <samplevnf>/VNFs/vACL - - make clean - - make - -5. The vACL executable will be created at the following location - - - <samplevnf>/VNFs/vACL/build/vACL - -Run -==== - ----------------------- -Setup Port to run VNF ----------------------- - -:: - - For DPDK versions 16.04 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk_nic_bind.py --status <--- List the network device - 3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 16.11 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk-devbind.py --status <--- List the network device - 3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 17.xx - 1. cd <samplevnf>/dpdk - 2. ./usertools/dpdk-devbind.py --status <--- List the network device - 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - - Make the necessary changes to the config files to run the vACL VNF - eg: ports_mac_list = 00:00:00:30:21:00 00:00:00:30:21:00 - ------------------ -ACL run commands ------------------ -Update the configuration according to system configuration. - -:: - - ./build/vACL -p <port mask> -f <config> -s <script> - SW_LoadB - - ./build/vACL -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB - - -Run IPv4 --------- - -:: - - Software LoadB - - cd <samplevnf>/VNFs/vACL/ - - ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/ IPv4_swlb_acl.tc - - - Hardware LoadB - - cd <samplevnf>/VNFs/vACL/ - - ./build/vACL -p 0x3 -f ./config/IPv4_hwlb_acl_1LB_1t.cfg -s ./config/IPv4_hwlb_acl.tc --hwlb 1 - -Run IPv6 --------- - -:: - - Software LoadB - - cd <samplevnf>/VNFs/vACL/ - - ./build/vACL -p 0x3 -f ./config/IPv6_swlb_acl_1LB_1t.cfg -s ./config/IPv6_swlb_acl.tc - - - Hardware LoadB - - cd <samplevnf>/VNFs/vACL/ - - ./build/vACL -p 0x3 -f ./config/IPv6_hwlb_acl_1LB_1t.cfg -s ./config/IPv6_hwlb_acl.tc --hwlb 1 - -vACL execution on BM & SRIOV --------------------------------- -To run the VNF, execute the following - -:: - - samplevnf/VNFs/vACL# ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/ IPv4_swlb_acl.tc - - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vACL configuration file - -s SCRIPT FILE: vACL script file - -vACL execution on OVS -------------------------- -To run the VNF, execute the following: - -:: - - samplevnf/VNFs/vACL# ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/ IPv4_swlb_acl.tc --disable-hw-csum - - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vACL configuration file - -s SCRIPT FILE: vACL script file - --disable-hw-csum :Disable TCP/UDP hw checksum diff --git a/docs/testing/user/userguide/vACL/README.rst b/docs/testing/user/userguide/vACL/README.rst deleted file mode 100644 index f8c3e817..00000000 --- a/docs/testing/user/userguide/vACL/README.rst +++ /dev/null @@ -1,159 +0,0 @@ -.. This work is licensed under a creative commons attribution 4.0 international -.. license. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) opnfv, national center of scientific research "demokritos" and others. - -======================================================== -vACL - Readme -======================================================== - -Introduction -================= -This application implements Access Control List (ACL). ACL is typically -used for rule based policy enforcement. It restricts access to a destination -IP address/port based on various header fields, such as source IP address/port, -destination IP address/port and protocol. It is built on top of DPDK and -uses the packet framework infrastructure. - - ----------- -About DPDK ----------- -The DPDK IP Pipeline Framework provides a set of libraries to build a pipeline -application. In this document, vACL will be explained in detail with its own -building blocks. - -This document assumes the reader possesses the knowledge of DPDK concepts and -packet framework. For more details, read DPDK Getting Started Guide, DPDK -Programmers Guide, DPDK Sample Applications Guide. - -Scope -========== -This application provides a standalone DPDK based high performance vACL Virtual -Network Function implementation. - -Features -=========== -The vACL VNF currently supports the following functionality - • CLI based Run-time rule configuration.(Add, Delete, List, Display, Clear, Modify) - • Ipv4 and ipv6 standard 5 tuple packet Selector support. - • Multithread support - • Multiple physical port support - • Hardware and Software Load Balancing - • L2L3 stack support for ARP/ICMP handling - • ARP (request, response, gratuitous) - • ICMP (terminal echo, echo response, passthrough) - • ICMPv6 and ND (Neighbor Discovery) - -High Level Design -==================== -The ACL Filter performs bulk filtering of incoming packets based on rules in current ruleset, -discarding any packets not permitted by the rules. The mechanisms needed for building the -rule database and performing lookups are provided by the DPDK API. -http://dpdk.org/doc/api/rte__acl_8h.html - -The Input FIFO contains all the incoming packets for ACL filtering. Packets will be dequeued -from the FIFO in bulk for processing by the ACL. Packets will be enqueued to the output FIFO. -The Input and Output FIFOs will be implemented using DPDK Ring Buffers. - -The DPDK ACL example: http://dpdk.org/doc/guides/sample_app_ug/l3_forward_access_ctrl.html -#figure-ipv4-acl-rule contains a suitable syntax and parser for ACL rules. - -Components of vACL -======================= -In vACL, each component is constructed using packet framework pipelines. -It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and -vACL worker pipeline components. A Pipeline framework is a collection of input -ports, table(s),output ports and actions (functions). - ---------------------------- -Receive and Transmit Driver ---------------------------- -Packets will be received in bulk and provided to LoadBalancer(LB) thread. -Transimit takes packets from worker threads in a dedicated ring and sent to -hardware queue. - ---------------------------- -Master Pipeline ---------------------------- -The Master component is part of all the IP Pipeline applications. This component -does not process any packets and should configure with Core 0, to allow -other cores for processing of the traffic. This component is responsible for -1. Initializing each component of the Pipeline application in different threads -2. Providing CLI shell for the user control/debug -3. Propagating the commands from user to the corresponding components - ---------------------------- -ARPICMP Pipeline ---------------------------- -This pipeline processes the APRICMP packets. - ---------------------------- -TXRX Pipelines ---------------------------- -The TXTX and RXRX pipelines are pass through pipelines to forward both ingress -and egress traffic to Loadbalancer. This is required when the Software -Loadbalancer is used. - ---------------------------- -Load Balancer Pipeline ---------------------------- -The vACL support both hardware and software balancing for load blalcning of -traffic across multiple VNF threads. The Hardware load balncing require support -from hardware like Flow Director for steering of packets to application through -hardware queues. - -The Software Load balancer is also supported if hardware loadbalancing can't be -used for any reason. The TXRX along with LOADB pipeline provides support for -software load balancing by distributing the flows to Multiple vACL worker -threads. -Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src -port, dest addr, dest port and protocol) applying an XOR logic distributing to -active worker threads, thereby maintaining an affinity of flows to worker -threads. - ---------------------------- -vACL Pipeline ---------------------------- -The vACL performs the rule-based packet filtering. - -vACL Topology ------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA - operation: - - Egress --> The packets sent out from ixia(port 0) will be sent through ACL to ixia(port 1). - - Igress --> The packets sent out from ixia(port 1) will be sent through ACL to ixia(port 0). - -vACL Topology (L4REPLAY) ------------------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY - - operation: - - Egress --> The packets sent out from ixia will pass through vACL to L3FWD/L4REPLAY. - - Ingress --> The L4REPLAY upon reception of packets (Private to Public Network), - will immediately replay back the traffic to IXIA interface. (Pub -->Priv). - -How to run L4Replay --------------------- -After the installation of samplevnf - -:: - - go to <samplevnf/VNFs/L4Replay> - ./buid/L4replay -c core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)" - eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)" - -Installation, Compile and Execution -======================================= -Plase refer to <samplevnf>/docs/vACL/INSTALL.rst for installation, configuration, compilation -and execution. diff --git a/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst b/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst deleted file mode 100644 index c947a371..00000000 --- a/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst +++ /dev/null @@ -1,81 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -========================================================= -vACL - Release Notes -========================================================= - -Introduction -=================== - -This is a beta release for Sample Virtual ACL VNF. -This vACL can application can be run independently (refer INSTALL.rst). - -User Guide -=============== -Refer to README.rst for further details on vACL, HLD, features supported, test -plan. For build configurations and execution requisites please refer to -INSTALL.rst. - -Feature for this release -=========================== -The vACL VNF currently supports the following functionality: - • CLI based Run-time rule configuration.(Add,Delete,List,Display,Clear,Modify) - • Ipv4 and ipv6 standard 5 tuple packet Selector support. - • Multithread support - • Multiple physical port support - • Hardware and Software Load Balancing - • L2L3 stack support for ARP/ICMP handling - • ARP (request, response, gratuitous) - • ICMP (terminal echo, echo response, passthrough) - • ICMPv6 and ND (Neighbor Discovery) - -System requirements - OS and kernel version -============================================== -This is supported on Ubuntu 14.04 and 16.04 and kernel version less than 4.5 - - VNFs on BareMetal support: - OS: Ubuntu 14.04 or 16.04 LTS - kernel: < 4.5 - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - VNFs on Standalone Hypervisor - HOST OS: Ubuntu 14.04 or 16.04 LTS - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - - OVS (DPDK) - 2.5 - - kernel: < 4.5 - - Hypervisor - KVM - - VM OS - Ubuntu 16.04/Ubuntu 14.04 - -Known Bugs and limitations -============================= - - Hardware Load Balancer feature is supported on Fortville nic ACL - version 4.53 and below. - - Hardware Checksum offload is not supported for IPv6 traffic. - - vACL on sriov is tested upto 4 threads - -Future Work -============== -Following would be possible enhancements - - Performance optimization on different platforms - -References -============= -Following links provides additional information for differenet version of DPDKs - -.. _QUICKSTART: - http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html - -.. _DPDKGUIDE: - http://dpdk.org/doc/guides-16.04/prog_guide/index.html - http://dpdk.org/doc/guides-16.11/prog_guide/index.html - http://dpdk.org/doc/guides-17.02/prog_guide/index.html - http://dpdk.org/doc/guides-17.05/prog_guide/index.html diff --git a/docs/testing/user/userguide/vACL/index.rst b/docs/testing/user/userguide/vACL/index.rst deleted file mode 100644 index c1ae029b..00000000 --- a/docs/testing/user/userguide/vACL/index.rst +++ /dev/null @@ -1,11 +0,0 @@ -#################### -vACL samplevnf -#################### - -.. toctree:: - :numbered: - :maxdepth: 2 - - RELEASE_NOTES.rst - README.rst - INSTALL.rst diff --git a/docs/testing/user/userguide/vCGNAPT/INSTALL.rst b/docs/testing/user/userguide/vCGNAPT/INSTALL.rst deleted file mode 100644 index 85873109..00000000 --- a/docs/testing/user/userguide/vCGNAPT/INSTALL.rst +++ /dev/null @@ -1,230 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -============================ -vCGNAPT - Installation Guide -============================ - - -vCGNAPT Compilation -=================== - -After downloading (or doing a git clone) in a directory (samplevnf) - -Dependencies -------------- - -- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05) Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/) -- libpcap-dev -- libzmq -- libcurl - -Environment variables ---------------------- - -Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk -required only for DPDK version 16.04. - -:: - - export RTE_SDK=<dpdk directory> - export RTE_TARGET=x86_64-native-linuxapp-gcc - -This is done by vnf_build.sh script. - -Auto Build: -=========== -$ ./tools/vnf_build.sh in samplevnf root folder - -Follow the steps in the screen from option [1] --> [9] and select option [8] -to build the vnfs. -It will automatically download selected DPDK version and any required patches -and will setup everything and build vCGNAPT VNFs. - -Following are the options for setup: - -:: - - ---------------------------------------------------------- - Step 1: Environment setup. - ---------------------------------------------------------- - [1] Check OS and network connection - [2] Select DPDK RTE version - - ---------------------------------------------------------- - Step 2: Download and Install - ---------------------------------------------------------- - [3] Agree to download - [4] Download packages - [5] Download DPDK zip - [6] Build and Install DPDK - [7] Setup hugepages - - ---------------------------------------------------------- - Step 3: Build VNFs - ---------------------------------------------------------- - [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay) - - [9] Exit Script - -An vCGNAPT executable will be created at the following location -samplevnf/VNFs/vCGNAPT/build/vCGNAPT - - -Manual Build: -============= -1. Download DPDK supported version from dpdk.org - - - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip -2. unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 - (Not required for other DPDK versions) - - - cd dpdk - - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch - - - build dpdk - - - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc - - cd x86_64-native-linuxapp-gcc - - make - - - Setup huge pages - - - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified - explicitly and can also be optionally set as the default hugepage size for - the system. For example, to reserve 8G of hugepage memory in the form of - eight 1G pages, the following options should be passed to the kernel: - * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048 - - Add this to Go to /etc/default/grub configuration file. - - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048" - to the GRUB_CMDLINE_LINUX entry. - -3. Setup Environment Variable - - - export RTE_SDK=<samplevnf>/dpdk - - export RTE_TARGET=x86_64-native-linuxapp-gcc - - export VNF_CORE=<samplevnf> - or using ./tools/setenv.sh - -4. Build vCGNAPT VNFs - - - cd <samplevnf>/VNFs/vCGNAPT - - make clean - - make - -5. An vCGNAPT executable will be created at the following location - - - <samplevnf>/VNFs/vCGNAPT/build/vCGNAPT - -Run -==== - -Setup Port to run VNF ----------------------- - -:: - - For DPDK versions 16.04 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk_nic_bind.py --status <--- List the network device - 3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 16.11 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk-devbind.py --status <--- List the network device - 3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 17.xx - 1. cd <samplevnf>/dpdk - 2. ./usertools/dpdk-devbind.py --status <--- List the network device - 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - Make the necessary changes to the config files to run the vCGNAPT VNF - eg: ports_mac_list = 00:00:00:30:21:F0 00:00:00:30:21:F1 - -Dynamic CGNAPT --------------- -Update the configuration according to system configuration. - -:: - - ./vCGNAPT -p <port mask> -f <config> -s <script> - SW_LoadB - ./vCGNAPT -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB - -Static CGNAPT -------------- -Update the script file and add Static NAT Entry - -:: - - e.g, - ;p <pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port> - ;p 3 entry addm 152.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535 - -Run IPv4 ----------- - -:: - - Software LoadB: - - cd <samplevnf>/VNFs/vCGNAPT/build - ./vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg - - - Hardware LoadB: - - cd <samplevnf>/VNFs/vCGNAPT/build - ./vCGNAPT -p 0x3 -f ./config/arp_hwlb-2P-1T.cfg -s ./config/arp_hwlb_scriptfile_2P.cfg --hwlb 1 - -Run IPv6 ---------- - -:: - - Software LoadB: - - cd <samplevnf>/VNFs/vCGNAPT/build - ./vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T-ipv6.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg - - - Hardware LoadB: - - cd <samplevnf>/VNFs/vCGNAPT/build - ./vCGNAPT -p 0x3 -f ./config/arp_hwlb-2P-1T-ipv6.cfg -s ./config/arp_hwlb_scriptfile_2P.cfg --hwlb 1 - -vCGNAPT execution on BM & SRIOV --------------------------------- - -:: - - To run the VNF, execute the following: - samplevnf/VNFs/vCGNAPT# ./build/vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vCGNAPT configuration file - -s SCRIPT FILE: vCGNAPT script file - -vCGNAPT execution on OVS -------------------------- -To run the VNF, execute the following: - -:: - - samplevnf/VNFs/vCGNAPT# ./build/vCGNAPT -p 0x3 ./config/arp_txrx-2P-1T.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg --disable-hw-csum - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vCGNAPT configuration file - -s SCRIPT FILE: vCGNAPT script file - --disable-hw-csum :Disable TCP/UDP hw checksum diff --git a/docs/testing/user/userguide/vCGNAPT/README.rst b/docs/testing/user/userguide/vCGNAPT/README.rst deleted file mode 100644 index dd6bb079..00000000 --- a/docs/testing/user/userguide/vCGNAPT/README.rst +++ /dev/null @@ -1,197 +0,0 @@ -.. this work is licensed under a creative commons attribution 4.0 international -.. license. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) opnfv, national center of scientific research "demokritos" and others. - -======================================================== -vCGNAPT - Readme -======================================================== - -Introduction -============== -This application implements vCGNAPT. The idea of vCGNAPT is to extend the life of -the service providers IPv4 network infrastructure and mitigate IPv4 address -exhaustion by using address and port translation in large scale. It processes the -traffic in both the directions. - -It also supports the connectivity between the IPv6 access network to IPv4 data network -using the IPv6 to IPv4 address translation and vice versa. - -About DPDK ----------- -The DPDK IP Pipeline Framework provides set of libraries to build a pipeline -application. In this document, CG-NAT application will be explained with its -own building blocks. - -This document assumes the reader possess the knowledge of DPDK concepts and IP -Pipeline Framework. For more details, read DPDK Getting Started Guide, DPDK -Programmers Guide, DPDK Sample Applications Guide. - -Scope -========== -This application provides a standalone DPDK based high performance vCGNAPT -Virtual Network Function implementation. - -Features -=========== -The vCGNAPT VNF currently supports the following functionality: - • Static NAT - • Dynamic NAT - • Static NAPT - • Dynamic NAPT - • ARP (request, response, gratuitous) - • ICMP (terminal echo, echo response, passthrough) - • ICMPv6 and ND (Neighbor Discovery) - • UDP, TCP and ICMP protocol passthrough - • Multithread support - • Multiple physical port support - • Limiting max ports per client - • Limiting max clients per public IP address - • Live Session tracking to NAT flow - • NAT64 - • PCP Support - • ALG SIP - • ALG FTP - -High Level Design -==================== -The Upstream path defines the traffic from Private to Public and the downstream -path defines the traffic from Public to Private. The vCGNAPT has same set of -components to process Upstream and Downstream traffic. - -In vCGNAPT application, each component is constructed as IP Pipeline framework. -It includes Master pipeline component, load balancer pipeline component and vCGNAPT -pipeline component. - -A Pipeline framework is collection of input ports, table(s), output ports and -actions (functions). In vCGNAPT pipeline, main sub components are the Inport function -handler, Table and Table function handler. vCGNAPT rules will be configured in the -table which translates egress and ingress traffic according to physical port -information from which side packet is arrived. The actions can be forwarding to the -output port (either egress or ingress) or to drop the packet. - -vCGNAPT Graphical Overview -========================== -The idea of vCGNAPT is to extend the life of the service providers IPv4 network infrastructure -and mitigate IPv4 address exhaustion by using address and port translation in large scale. -It processes the traffic in both the directions. - -.. code-block:: console - - +------------------+ - | +-----+ - | Private consumer | CPE |---------------+ - | IPv4 traffic +-----+ | - +------------------+ | - +------------------+ v +----------------+ - | | +------------+ | | - | Private IPv4 | | vCGNAPT | | Public | - | access network | | NAT44 | | IPv4 traffic | - | | +------------+ | | - +------------------+ | +----------------+ - +------------------+ | - | +-----+ | - | Private consumer| CPE |-----------------+ - | IPv4 traffic +-----+ - +------------------+ - Figure 1: vCGNAPT deployment in Service provider network - - - -Components of vCGNAPT -===================== - -In vCGNAPT, each component is constructed as a packet framework. It includes Master pipeline -component, driver, load balancer pipeline component and vCGNAPT worker pipeline component. A -pipeline framework is a collection of input ports, table(s), output ports and actions -(functions). - -Receive and transmit driver ----------------------------- -Packets will be received in bulk and provided to load balancer thread. The transmit takes -packets from worker thread in a dedicated ring and sent to the hardware queue. - -ARPICMP pipeline ------------------------- -ARPICMP pipeline is responsible for handling all l2l3 arp related packets. - -This component does not process any packets and should configure with Core 0, -to save cores for other components which processes traffic. The component -is responsible for: -1. Initializing each component of the Pipeline application in different threads -2. Providing CLI shell for the user -3. Propagating the commands from user to the corresponding components. -4. ARP and ICMP are handled here. - -Load Balancer pipeline ------------------------- -Load balancer is part of the Multi-Threaded CGMAPT release which distributes -the flows to Multiple ACL worker threads. - -Distributes traffic based on the 2 or 5 tuple (source address, source port, -destination address, destination port and protocol) applying an XOR logic -distributing the load to active worker threads, thereby maintaining an -affinity of flows to worker threads. - -Tuple can be modified/configured using configuration file - -vCGNAPT - Static -==================== -The vCGNAPT component performs translation of private IP & port to public IP & -port at egress side and public IP & port to private IP & port at Ingress side -based on the NAT rules added to the pipeline Hash table. The NAT rules are -added to the Hash table via user commands. The packets that have a matching -egress key or ingress key in the NAT table will be processed to change IP & -port and will be forwarded to the output port. The packets that do not have a -match will be taken a default action. The default action may result in drop of -the packets. - -vCGNAPT - Dynamic -=================== -The vCGNAPT component performs translation of private IP & port to public IP & port -at egress side and public IP & port to private IP & port at Ingress side based on the -NAT rules added to the pipeline Hash table. Dynamic nature of vCGNAPT refers to the -addition of NAT entries in the Hash table dynamically when new packet arrives. The NAT -rules will be added to the Hash table automatically when there is no matching entry in -the table and the packet is circulated through software queue. The packets that have a -matching egress key or ingress key in the NAT table will be processed to change IP & -port and will be forwarded to the output port defined in the entry. - -Dynamic vCGNAPT acts as static one too, we can do NAT entries statically. Static NAT -entries port range must not conflict to dynamic NAT port range. - -vCGNAPT Static Topology ------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA - operation: - Egress --> The packets sent out from ixia(port 0) will be CGNAPTed to ixia(port 1). - Igress --> The packets sent out from ixia(port 1) will be CGNAPTed to ixia(port 0). - -vCGNAPT Dynamic Topology (L4REPLAY) ------------------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY - operation: - Egress --> The packets sent out from ixia will be CGNAPTed to L3FWD/L4REPLAY. - Ingress --> The L4REPLAY upon reception of packets (Private to Public Network), - will immediately replay back the traffic to IXIA interface. (Pub -->Priv). - -How to run L4Replay --------------------- -After the installation of samplevnf: - -:: - - go to <samplevnf/VNFs/L4Replay> - ./buid/L4replay -c core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)" - eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)" - -Installation, Compile and Execution -==================================== -Plase refer to <samplevnf>/docs/vCGNAPT/INSTALL.rst for installation, configuration, compilation -and execution. diff --git a/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst b/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst deleted file mode 100644 index a776a54d..00000000 --- a/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst +++ /dev/null @@ -1,90 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -========================================================= -vCGNAPT - Release Notes -========================================================= - -Introduction -================ -This is the beta release for vCGNAPT VNF. -vCGNAPT application can be run independently (refer INSTALL.rst). - -User Guide -=============== -Refer to README.rst for further details on vCGNAPT, HLD, features supported, -test plan. For build configurations and execution requisites please refer to -INSTALL.rst. - -Feature for this release -=========================== -This release supports following features as part of vCGNAPT - -- vCGNAPT can run as a standalone application on bare-metal linux server or on a virtual machine using SRIOV and OVS dpdk. -- Static NAT -- Dynamic NAT -- Static NAPT -- Dynamic NAPT -- ARP (request, response, gratuitous) -- ICMP (terminal echo, echo response, passthrough) -- ICMPv6 and ND (Neighbor Discovery) -- UDP, TCP and ICMP protocol passthrough -- Multithread support -- Multiple physical port support -- Limiting max ports per client -- Limiting max clients per public IP address -- Live Session tracking to NAT flow -- PCP support -- NAT64 -- ALG SIP -- ALG FTP - -System requirements - OS and kernel version -============================================== -This is supported on Ubuntu 14.04 and 16.04 and kernel version less than 4.5 - - VNFs on BareMetal support: - OS: Ubuntu 14.04 or 16.04 LTS - kernel: < 4.5 - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - VNFs on Standalone Hypervisor - HOST OS: Ubuntu 14.04 or 16.04 LTS - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - - OVS (DPDK) - 2.5 - - kernel: < 4.5 - - Hypervisor - KVM - - VM OS - Ubuntu 16.04/Ubuntu 14.04 - -Known Bugs and limitations -============================= -- Hadware Load Balancer feature is supported on fortville nic FW version 4.53 and below. -- L4 UDP Replay is used to capture throughput for dynamic cgnapt -- Hardware Checksum offload is not supported for IPv6 traffic. -- CGNAPT on sriov is tested till 4 threads - -Future Work -============== -- SCTP passthrough support -- Multi-homing support -- Performance optimization on different platforms - -References -============= -Following links provides additional information for differenet version of DPDKs - .. _QUICKSTART: - http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html - - .. _DPDKGUIDE: - http://dpdk.org/doc/guides-16.04/prog_guide/index.html - http://dpdk.org/doc/guides-16.11/prog_guide/index.html - http://dpdk.org/doc/guides-17.02/prog_guide/index.html - http://dpdk.org/doc/guides-17.05/prog_guide/index.html diff --git a/docs/testing/user/userguide/vCGNAPT/index.rst b/docs/testing/user/userguide/vCGNAPT/index.rst deleted file mode 100644 index aacda1c2..00000000 --- a/docs/testing/user/userguide/vCGNAPT/index.rst +++ /dev/null @@ -1,11 +0,0 @@ -#################### -vCGNAPT samplevnf -#################### - -.. toctree:: - :numbered: - :maxdepth: 2 - - RELEASE_NOTES.rst - README.rst - INSTALL.rst diff --git a/docs/testing/user/userguide/vFW/INSTALL.rst b/docs/testing/user/userguide/vFW/INSTALL.rst deleted file mode 100644 index b4cee086..00000000 --- a/docs/testing/user/userguide/vFW/INSTALL.rst +++ /dev/null @@ -1,229 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -============================ -vFW - Installation Guide -============================ - - -vFW Compilation -================ -After downloading (or doing a git clone) in a directory (samplevnf) - -------------- -Dependencies -------------- - -- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05). Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/dpdk-$DPDK_RTE_VER.zip). Both the options are available as part of vnf_build.sh below. -- libpcap-dev -- libzmq -- libcurl - ---------------------- -Environment variables ---------------------- -Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk -(NOTE: required only for DPDK version 16.04). - -:: - - export RTE_SDK=<dpdk directory> - - export RTE_TARGET=x86_64-native-linuxapp-gcc - -This is done by vnf_build.sh script. - -Auto Build -=========== -$ ./tools/vnf_build.sh in samplevnf root folder - -Follow the steps in the screen from option [1] --> [9] and select option [8] -to build the vnfs. -It will automatically download selected DPDK version and any required patches -and will setup everything and build vFW VNFs. - -Following are the options for setup: - -:: - - ---------------------------------------------------------- - Step 1: Environment setup. - ---------------------------------------------------------- - [1] Check OS and network connection - [2] Select DPDK RTE version - - ---------------------------------------------------------- - Step 2: Download and Install - ---------------------------------------------------------- - [3] Agree to download - [4] Download packages - [5] Download DPDK zip - [6] Build and Install DPDK - [7] Setup hugepages - - ---------------------------------------------------------- - Step 3: Build VNFs - ---------------------------------------------------------- - [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay) - - [9] Exit Script - -An vFW executable will be created at the following location -samplevnf/VNFs/vFW/build/vFW - -Manual Build -============= -1. Download DPDK supported version from dpdk.org - - - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip -2. unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 - (Not required for other DPDK versions) - - - cd dpdk - - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch - - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch - - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch - - - build dpdk - - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc - - cd x86_64-native-linuxapp-gcc - - make - - - Setup huge pages - - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified - explicitly and can also be optionally set as the default hugepage - size for the system. For example, to reserve 8G of hugepage memory in - the form of eight 1G pages, the following options should be passed - to the kernel: - * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048 - - Add this to Go to /etc/default/grub configuration file. - - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048" - to the GRUB_CMDLINE_LINUX entry. - -3. Setup Environment Variable - - - export RTE_SDK=<samplevnf>/dpdk - - export RTE_TARGET=x86_64-native-linuxapp-gcc - - export VNF_CORE=<samplevnf> - - or using ./tools/setenv.sh - -4. Build vFW VNFs - - - cd <samplevnf>/VNFs/vFW - - make clean - - make - -5. The vFW executable will be created at the following location - - - <samplevnf>/VNFs/vFW/build/vFW - -Run -==== - ----------------------- -Setup Port to run VNF ----------------------- -The tools folder and utilities names are different across DPDK versions. - -:: - - For DPDK versions 16.04 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk_nic_bind.py --status <--- List the network device - 3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1> - - .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 16.11 - 1. cd <samplevnf>/dpdk - 2. ./tools/dpdk-devbind.py --status <--- List the network device - 3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - - .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - - For DPDK versions 17.xx - 1. cd <samplevnf>/dpdk - 2. ./usertools/dpdk-devbind.py --status <--- List the network device - 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - - .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - -Make the necessary changes to the config files to run the vFW VNF - -eg: ports_mac_list = 00:00:00:30:21:01 00:00:00:30:21:00 - ----------------------- -Firewall Run commands ----------------------- -Update the configuration according to system configuration. - -:: - - ./vFW -p <port mask> -f <config> -s <script> - SW_LoadB - ./vFW -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB - -Run IPv4 ----------- -To run the vFW in Software LB or Hardware LB with IPv4 traffic - -:: - - Software LoadB: - - cd <samplevnf>/VNFs/vFW/ - ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc - - - Hardware LoadB: - - cd <samplevnf>/VNFs/vFW/ - ./build/vFW -p 0x3 -f ./config/VFW_HWLB_IPV4_SinglePortPair_4Thread.cfg -s ./config/VFW_HWLB_IPV4_SinglePortPair_script.cfg --hwlb 4 - -Run IPv6 ---------- -To run the vFW in Software LB or Hardware LB with IPvr64 traffic - -:: - - Software LoadB: - - cd <samplevnf>/VNFs/vFW - ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV6_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_IPV6_SinglePortPair_script.tc - - - Hardware LoadB: - - cd <samplevnf>/VNFs/vFW/ - ./build/vFW -p 0x3 -f ./config/VFW_HWLB_IPV6_SinglePortPair_4Thread.cfg -s ./config/VFW_HWLB_IPV6_SinglePortPair_script.tc --hwlb 4 - -vFW execution on BM & SRIOV ---------------------------- -To run the VNF, execute the following - -:: - - samplevnf/VNFs/vFW# ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vFW configuration file - -s SCRIPT FILE: vFW script file - -vFW execution on OVS --------------------- - -:: - - To run the VNF, execute the following: - samplevnf/VNFs/vFW# ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc --disable-hw-csum - Command Line Params: - -p PORTMASK: Hexadecimal bitmask of ports to configure - -f CONFIG FILE: vFW configuration file - -s SCRIPT FILE: vFW script file - --disable-hw-csum :Disable TCP/UDP hw checksum diff --git a/docs/testing/user/userguide/vFW/README.rst b/docs/testing/user/userguide/vFW/README.rst deleted file mode 100644 index cc3c2b40..00000000 --- a/docs/testing/user/userguide/vFW/README.rst +++ /dev/null @@ -1,182 +0,0 @@ -.. This work is licensed under a creative commons attribution 4.0 international -.. license. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) opnfv, national center of scientific research "demokritos" and others. - -======================================================== -vFW - Readme -======================================================== - -Introduction -=============== -The virtual firewall (vFW) is an application implements Firewall. vFW is used -as a barrier between secure internal and an un-secure external network. The -firewall performs Dynamic Packet Filtering. This involves keeping track of the -state of Layer 4 (Transport)traffic,by examining both incoming and outgoing -packets over time. Packets which don't fall within expected parameters given -the state of the connection are discarded. The Dynamic Packet Filtering will -be performed by Connection Tracking component, similar to that supported in -linux. The firewall also supports Access Controlled List(ACL) for rule based -policy enforcement. Firewall is built on top of DPDK and uses the packet library. - ----------- -About DPDK ----------- -The DPDK IP Pipeline Framework provides a set of libraries to build a pipeline -application. In this document, vFW will be explained in detail with its own -building blocks. - -This document assumes the reader possesses the knowledge of DPDK concepts and -packet framework. For more details, read DPDK Getting Started Guide, DPDK -Programmers Guide, DPDK Sample Applications Guide. - -Scope -========== -This application provides a standalone DPDK based high performance vFW Virtual -Network Function implementation. - -Features -=========== -The vFW VNF currently supports the following functionality: - • Basic packet filtering (malformed packets, IP fragments) - • Connection tracking for TCP and UDP - • Access Control List for rule based policy enforcement - • SYN-flood protection via Synproxy* for TCP - • UDP, TCP and ICMP protocol pass-through - • CLI based enable/disable connection tracking, synproxy, basic packet - filtering - • Multithread support - • Multiple physical port support - • Hardware and Software Load Balancing - • L2L3 stack support for ARP/ICMP handling - • ARP (request, response, gratuitous) - • ICMP (terminal echo, echo response, passthrough) - • ICMPv6 and ND (Neighbor Discovery) - -High Level Design -==================== -The Firewall performs basic filtering for malformed packets and dynamic packet -filtering incoming packets using the connection tracker library. -The connection data will be stored using a DPDK hash table. There will be one -entry in the hash table for each connection. The hash key will be based on source -address/port,destination address/port, and protocol of a packet. The hash key -will be processed to allow a single entry to be used, regardless of which -direction the packet is flowing (thus changing the source and destination). -The ACL is implemented as libray stattically linked to vFW, which is used for -used for rule based packet filtering. - -TCP connections and UDP pseudo connections will be tracked separately even if -theaddresses and ports are identical. Including the protocol in the hash key -will ensure this. - -The Input FIFO contains all the incoming packets for vFW filtering. The vFW -Filter has no dependency on which component has written to the Input FIFO. -Packets will be dequeued from the FIFO in bulk for processing by the vFW. -Packets will be enqueued to the output FIFO. -The software or hardware loadbalancing can be used for traffic distribution -across multiple worker threads. The hardware loadbalancing require ethernet -flow director support from hardware (eg. Fortville x710 NIC card). -The Input and Output FIFOs will be implemented using DPDK Ring Buffers. - -Components of vFW -==================== - -In vFW, each component is constructed using packet framework pipelines. -It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and -vfw worker pipeline components. A Pipeline framework is a collection of input -ports, table(s),output ports and actions (functions). - ---------------------------- -Receive and Transmit Driver ---------------------------- -Packets will be received in bulk and provided to LoadBalancer(LB) thread. -Transimit takes packets from worker threads in a dedicated ring and sent to -hardware queue. - ---------------------------- -Master Pipeline ---------------------------- -The Master component is part of all the IP Pipeline applications. This component -does not process any packets and should configure with Core 0, to allow -other cores for processing of the traffic. This component is responsible for -1. Initializing each component of the Pipeline application in different threads -2. Providing CLI shell for the user control/debug -3. Propagating the commands from user to the corresponding components - ------------------- -ARPICMP Pipeline ------------------- -This pipeline processes the APRICMP packets. - ---------------- -TXRX Pipelines ---------------- -The TXTX and RXRX pipelines are pass through pipelines to forward both ingress -and egress traffic to Loadbalancer. This is required when the Software -Loadbalancer is used. - ----------------------- -Load Balancer Pipeline ----------------------- -The vFW support both hardware and software balancing for load balancing of -traffic across multiple VNF threads. The Hardware load balancing require support -from hardware like Flow Director for steering of packets to application through -hardware queues. - -The Software Load balancer is also supported if hardware load balancing can't be -used for any reason. The TXRX along with LOADB pipeline provides support for -software load balancing by distributing the flows to Multiple vFW worker -threads. -Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src -port, dest addr, dest port and protocol) applying an XOR logic distributing to -active worker threads, thereby maintaining an affinity of flows to worker -threads. - ---------------- -vFW Pipeline ---------------- -The vFW performs the basic packet filtering and will drop the invalid and -malformed packets.The Dynamic packet filtering done using the connection tracker -library. The packets are processed in bulk and Hash table is used to maintain -the connection details. -Every TCP/UDP packets are passed through connection tracker library for valid -connection. The ACL library integrated to firewall provide rule based filtering. - ------------------------- -vFW Topology ------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA - operation: - Egress --> The packets sent out from ixia(port 0) will be Firewalled to ixia(port 1). - Igress --> The packets sent out from ixia(port 1) will be Firewalled to ixia(port 0). - ------------------------------------- -vFW Topology (L4REPLAY) ------------------------------------- - -:: - - IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY - operation: - Egress --> The packets sent out from ixia will pass through vFW to L3FWD/L4REPLAY. - Ingress --> The L4REPLAY upon reception of packets (Private to Public Network), - will immediately replay back the traffic to IXIA interface. (Pub -->Priv). - --------------------- -How to run L4Replay --------------------- -After the installation of samplevnf - -:: - - go to <samplevnf/VNFs/L4Replay> - ./buid/L4replay -c core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)" - eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)" - -Installation, Compile and Execution -==================================== -Plase refer to <samplevnf>/docs/vFW/INSTALL.rst for installation, configuration, -compilation and execution. diff --git a/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst b/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst deleted file mode 100644 index 540f671d..00000000 --- a/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst +++ /dev/null @@ -1,92 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -========================================================= -vFW - Release Notes -========================================================= - -Introduction -================ - -This is a beta release for Sample Virtual Firewall VNF. -This vFW can application can be run independently (refer INSTALL.rst). - -User Guide -=============== -Refer to README.rst for further details on vFW, HLD, features supported, test -plan. For build configurations and execution requisites please refer to -INSTALL.rst. - -Feature for this release -=========================== -This release supports following features as part of vFW - - - Basic packet filtering (malformed packets, IP fragments) - - Connection tracking for TCP and UDP - - Access Control List for rule based policy enforcement - - SYN-flood protection via Synproxy* for TCP - - UDP, TCP and ICMP protocol pass-through - - CLI based enable/disable connection tracking, synproxy, basic packet - filtering - - L2L3 stack support for ARP/ICMP handling - - ARP (request, response, gratuitous) - - ICMP (terminal echo, echo response, passthrough) - - ICMPv6 and ND (Neighbor Discovery) - - Hardware and Software Load Balancing - - Multithread support - - Multiple physical port support - -System requirements - OS and kernel version -============================================== -This is supported on Ubuntu 14.04 and Ubuntu 16.04 and kernel version less than 4.5 - - VNFs on BareMetal support: - OS: Ubuntu 14.04 or 16.04 LTS - kernel: < 4.5 - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - VNFs on Standalone Hypervisor: - HOST OS: Ubuntu 14.04 or 16.04 LTS - http://releases.ubuntu.com/16.04/ - Download/Install the image: ubuntu-16.04.1-server-amd64.iso - - - OVS (DPDK) - 2.5 - - kernel: < 4.5 - - Hypervisor - KVM - - VM OS - Ubuntu 16.04/Ubuntu 14.04 - -Known Bugs and limitations -============================= - - - Hadware Load Balancer feature is supported on fortville nic FW version 4.53 and below. - - Hardware Checksum offload is not supported for IPv6 traffic. - - vFW on sriov is tested upto 4 threads - - Http Multiple clients/server with HWLB is not working - -Future Work -============== -Following would be possible enhancement functionalities - - - Automatic enable/disable of synproxy - - Support TCP timestamps with synproxy - - FTP ALG integration - - Performance optimization on different platforms - -References -============= -Following links provides additional information for differenet version of DPDKs - -.. _QUICKSTART: - http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html - http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html - -.. _DPDKGUIDE: - http://dpdk.org/doc/guides-16.04/prog_guide/index.html - http://dpdk.org/doc/guides-16.11/prog_guide/index.html - http://dpdk.org/doc/guides-17.02/prog_guide/index.html - http://dpdk.org/doc/guides-17.05/prog_guide/index.html diff --git a/docs/testing/user/userguide/vFW/index.rst b/docs/testing/user/userguide/vFW/index.rst deleted file mode 100644 index 8b6a8186..00000000 --- a/docs/testing/user/userguide/vFW/index.rst +++ /dev/null @@ -1,11 +0,0 @@ -#################### -vFW samplevnf -#################### - -.. toctree:: - :numbered: - :maxdepth: 2 - - RELEASE_NOTES.rst - README.rst - INSTALL.rst |