summaryrefslogtreecommitdiffstats
path: root/docs/testing/user
diff options
context:
space:
mode:
authorDeepak S <deepak.s@linux.intel.com>2017-10-17 19:34:58 -0700
committerDeepak S <deepak.s@linux.intel.com>2017-10-17 21:00:50 -0700
commitbdf826f13c9b3b3c0d1b8e0028dad653ef69d9fc (patch)
tree94ac71ca511a97d21baec75a6be4183a8af5c4d2 /docs/testing/user
parent833b18a279ff8788885820bbbf779f0a4163c68a (diff)
Updating user guide
Change-Id: I80bcbe616b8f2c64151de6e588c892de6c3dc8f1 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Diffstat (limited to 'docs/testing/user')
-rw-r--r--docs/testing/user/userguide/02-methodology.rst2
-rwxr-xr-xdocs/testing/user/userguide/03-architecture.rst5
-rw-r--r--docs/testing/user/userguide/04-installation.rst67
-rw-r--r--docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst465
-rw-r--r--docs/testing/user/userguide/06-How_to_use_REST_api.rst323
-rw-r--r--docs/testing/user/userguide/07-Config_files.rst121
-rw-r--r--docs/testing/user/userguide/09-prox.rst479
-rw-r--r--docs/testing/user/userguide/images/prox_core.pngbin0 -> 651187 bytes
-rw-r--r--docs/testing/user/userguide/index.rst1
9 files changed, 1012 insertions, 451 deletions
diff --git a/docs/testing/user/userguide/02-methodology.rst b/docs/testing/user/userguide/02-methodology.rst
index 5550fec9..01cbb276 100644
--- a/docs/testing/user/userguide/02-methodology.rst
+++ b/docs/testing/user/userguide/02-methodology.rst
@@ -11,7 +11,7 @@ Abstract
========
This chapter describes the methodology/overview of SampleVNF project from
-the perspective of a :term:`VNF` and verifying the :term:`NFVI`
+the perspective of a :term:`VNF` and :term:`NFVI` Characterization
Overview
========
diff --git a/docs/testing/user/userguide/03-architecture.rst b/docs/testing/user/userguide/03-architecture.rst
index 3654c43a..62a17349 100755
--- a/docs/testing/user/userguide/03-architecture.rst
+++ b/docs/testing/user/userguide/03-architecture.rst
@@ -9,7 +9,7 @@ Architecture
Abstract
========
-This chapter describes the samplevnf software architecture.
+This chapter describes the samplevnf software architecture.
we will introduce it VNFs. More technical details will be introduced in this chapter.
Overview
@@ -79,6 +79,7 @@ VNF supported
Intel® DPPD - PROX is an application built on top of DPDK which allows
creating software architectures, such as the one depicted below, through
small and readable configuration files.
+ This VNF can act as L2FWD, L3FWD, BNG etc.
Test Framework
--------------
@@ -111,3 +112,5 @@ SampleVNF Directory structure
*VNFs/* - all VNF source code directory.
*VNF_Catalogue/* - Collection of all Open Source VNFs
+
+*heat_template/* - Sample HEAT templates for VNFs
diff --git a/docs/testing/user/userguide/04-installation.rst b/docs/testing/user/userguide/04-installation.rst
index 9a31ecdc..3b925759 100644
--- a/docs/testing/user/userguide/04-installation.rst
+++ b/docs/testing/user/userguide/04-installation.rst
@@ -108,6 +108,11 @@ The connectivity could be
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
+ For correalted traffic, use below configuration
+ TG_1:port 0 <------> VNF:Port 0
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ (TG_2(UDP_Replay) reflects all the traffic on the given port)
+
2) Multi port pair : More than one pair of traffic
::
@@ -120,7 +125,9 @@ The connectivity could be
For correalted traffic, use below configuration
TG_1:port 0 <------> VNF:Port 0
- VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ TG_1:port 1 <------> VNF:Port 2
+ VNF:Port 3 <------> TG_2:port 1 (UDP Replay)
(TG_2(UDP_Replay) reflects all the traffic on the given port)
* Bare-Metal
@@ -148,9 +155,7 @@ Build VNFs on the DUT:
Auto Build - Using script to build VNFs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Interactive options:
-
::
-
./tools/vnf_build.sh -i
Follow the steps in the screen from option [1] –> [9] and
select option [8] to build the vnfs.
@@ -179,52 +184,42 @@ Auto Build - Using script to build VNFs
[8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
[9] Exit Script
- * non-Interactive options:
+ * non-Interactive options:
::
-
./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
Manual Build
^^^^^^^^^^^^
::
-
1. Download DPDK supported version from dpdk.org
- http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
- unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
- cd dpdk
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
- make -j
- 2. Setup huge pages
- For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
- explicitly and can also be optionally set as the default hugepage size
- for the system. For example, to reserve 8G of hugepage memory in the form
- of eight 1G pages, the following options should be passed to the
- kernel: * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
- 3. Add this to Go to /etc/default/grub configuration file.
- Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”to the GRUB_CMDLINE_LINUX entry.
- 4. Setup Environment Variable
- export RTE_SDK=<samplevnf>/dpdk
- export RTE_TARGET=x86_64-native-linuxapp-gcc
- export VNF_CORE=<samplevnf>
- or using ./tools/setenv.sh
- 5. Build vACL VNFs
- cd <samplevnf>/VNFs/vACL
- make clean
- make
- The vACL executable will be created at the following location
- <samplevnf>/VNFs/vACL/build/vACL
+ * http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
+ * unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
+ * cd dpdk
+ * make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
+ * cd x86_64-native-linuxapp-gcc
+ * make -j
+ 2. Add this to Go to /etc/default/grub configuration file to setup hugepages.
+ * Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048” to the GRUB_CMDLINE_LINUX entry.
+ 3. Setup Environment Variable
+ * export RTE_SDK=<samplevnf>/dpdk
+ * export RTE_TARGET=x86_64-native-linuxapp-gcc
+ * export VNF_CORE=<samplevnf> or using ./tools/setenv.sh
+ 4. Build SampleVNFs e.g, vACL
+ * cd <samplevnf>/VNFs/vACL
+ * make clean
+ * make
+ * The vACL executable will be created at the following location
+ <samplevnf>/VNFs/vACL/build/vACL
2) Standalone virtualization/Openstack:
Build VM image from script in yardstick
-
::
-
- 1) git clone https://git.opnfv.org/yardstick
- 2) cd yardstick and run
- ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
+ 1) git clone https://git.opnfv.org/samplevnf
+ 2) cd samplevnf and run
+ ./tools/samplevnf-img-dpdk-samplevnf-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
+ Image available in: /tmp/workspace/samplevnf/xenial-server-cloudimg-amd64-disk1.img
To run VNFs. Please refer chapter `05-How_to_run_SampleVNFs.rst`
diff --git a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
index 29c76e69..3835a439 100644
--- a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
+++ b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
@@ -42,7 +42,7 @@ SUT requirements:
+-----------+------------------+
| OS | Ubuntu 16.04 LTS |
+-----------+------------------+
- | kernel | 4.4.0-34-generic|
+ | kernel | 4.4.0-34-generic |
+-----------+------------------+
| DPDK | 17.02 |
+-----------+------------------+
@@ -75,12 +75,19 @@ SRIOV or OVS) setup based on the test profile.
The connectivity could be
1) Single port pair : One pair ports used for traffic
+
::
e.g. Single port pair link0 and link1 of VNF are used
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
+ For correalted traffic, use below configuration
+ TG_1:port 0 <------> VNF:Port 0
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ (TG_2(UDP_Replay) reflects all the traffic on the given port)
+
2) Multi port pair : More than one pair of traffic
+
::
e.g. Two port pair link 0, link1, link2 and link3 of VNF are used
TG:port 0 <------> VNF:Port 0
@@ -90,8 +97,11 @@ The connectivity could be
For correalted traffic, use below configuration
TG_1:port 0 <------> VNF:Port 0
- VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ TG_1:port 1 <------> VNF:Port 2
+ VNF:Port 3 <------> TG_2:port 1 (UDP Replay)
(TG_2(UDP_Replay) reflects all the traffic on the given port)
+
* Bare-Metal
Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run
@@ -114,17 +124,19 @@ Setup Traffic generator
Step 0: Preparing hardware connection
Connect Traffic generator and VNF system back to back as shown in previous section
- TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1
+
+ ::
+ TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1
Step 1: Setting up Traffic generator (TRex)
TRex Software preparations
- ^^^^^^^^^^^^^^^^^^^^^^^^^^
- * Install the OS (Bare metal Linux, not VM!)
- * Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest
- * Untar the package: tar -xzf latest
- * Change dir to unzipped TRex
- * Create config file using command: sudo python dpdk_setup_ports.py -i
+ **************************
+ * Install the OS (Bare metal Linux, not VM!)
+ * Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest
+ * Untar the package: tar -xzf latest
+ * Change dir to unzipped TRex
+ * Create config file using command: sudo python dpdk_setup_ports.py -i
In case of Ubuntu 16 need python3
See paragraph config creation for detailed step-by-step
(Refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html)
@@ -140,89 +152,87 @@ Step 2: Procedure to build SampleVNFs
Auto Build
^^^^^^^^^^
-
* Interactive options:
::
-
- ./tools/vnf_build.sh -i
- Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs.
- It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs.
- Following are the options for setup:
- ----------------------------------------------------------
- Step 1: Environment setup.
- ----------------------------------------------------------
- [1] Check OS and network connection
- [2] Select DPDK RTE version
-
- ----------------------------------------------------------
- Step 2: Download and Install
- ----------------------------------------------------------
- [3] Agree to download
- [4] Download packages
- [5] Download DPDK zip
- [6] Build and Install DPDK
- [7] Setup hugepages
- [8] Download civetweb
-
- ----------------------------------------------------------
- Step 3: Build VNFs
- ----------------------------------------------------------
- [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
-
- [10] Exit Script
+ ./tools/vnf_build.sh -i
+ Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs.
+ It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs.
+ Following are the options for setup:
+ ----------------------------------------------------------
+ Step 1: Environment setup.
+ ----------------------------------------------------------
+ [1] Check OS and network connection
+ [2] Select DPDK RTE version
+
+ ----------------------------------------------------------
+ Step 2: Download and Install
+ ----------------------------------------------------------
+ [3] Agree to download
+ [4] Download packages
+ [5] Download DPDK zip
+ [6] Build and Install DPDK
+ [7] Setup hugepages
+ [8] Download civetweb
+
+ ----------------------------------------------------------
+ Step 3: Build VNFs
+ ----------------------------------------------------------
+ [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
+
+ [10] Exit Script
* Non-Interactive options:
::
-
- ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
+ ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
+ if system is behind the proxy
+ ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02> -p=<proxy>
Manual Build
^^^^^^^^^^^^
::
-
- 1) Download DPDK supported version from dpdk.org
- http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
- unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
- cd dpdk
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
- make
-
- 2) Download civetweb 1.9 version from the following link
- https://sourceforge.net/projects/civetweb/files/1.9/CivetWeb_V1.9.zip
- unzip CivetWeb_V1.9.zip
- mv civetweb-master civetweb
- cd civetweb
- make lib
-
- 3) Setup huge pages
- For 1G/2M hugepage sizes, for example 1G pages, the size must be
- specified explicitly and can also be optionally set as the
- default hugepage size for the system. For example, to reserve 8G
- of hugepage memory in the form of eight 1G pages, the following
- options should be passed to the kernel: * default_hugepagesz=1G
- hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
- 4) Add this to Go to /etc/default/grub configuration file.
- Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”
- to the GRUB_CMDLINE_LINUX entry.
- 5) Setup Environment Variable
- export RTE_SDK=<samplevnf>/dpdk
- export RTE_TARGET=x86_64-native-linuxapp-gcc
- export VNF_CORE=<samplevnf>
- or using ./tools/setenv.sh
- 6) Build VNFs
- cd <samplevnf>
- make
- or to build individual VNFs
- cd <samplevnf>/VNFs/
- make clean
- make
- The vFW executable will be created at the following location
- <samplevnf>/VNFs/vFW/build/vFW
+ 1) Download DPDK supported version from dpdk.org
+ http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
+ unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
+ cd dpdk
+ make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
+ cd x86_64-native-linuxapp-gcc
+ make
+
+ 2) Download civetweb 1.9 version from the following link
+ https://sourceforge.net/projects/civetweb/files/1.9/CivetWeb_V1.9.zip
+ unzip CivetWeb_V1.9.zip
+ mv civetweb-master civetweb
+ cd civetweb
+ make lib
+
+ 3) Setup huge pages
+ For 1G/2M hugepage sizes, for example 1G pages, the size must be
+ specified explicitly and can also be optionally set as the
+ default hugepage size for the system. For example, to reserve 8G
+ of hugepage memory in the form of eight 1G pages, the following
+ options should be passed to the kernel: * default_hugepagesz=1G
+ hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
+ 4) Add this to Go to /etc/default/grub configuration file.
+ Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”
+ to the GRUB_CMDLINE_LINUX entry.
+ 5) Setup Environment Variable
+ export RTE_SDK=<samplevnf>/dpdk
+ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export VNF_CORE=<samplevnf>
+ or using ./tools/setenv.sh
+ 6) Build VNFs
+ cd <samplevnf>
+ make
+ or to build individual VNFs
+ cd <samplevnf>/VNFs/
+ make clean
+ make
+ The vFW executable will be created at the following location
+ <samplevnf>/VNFs/vFW/build/vFW
Virtual Firewall - How to run
@@ -234,58 +244,57 @@ a) Bind ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vFW/config
- Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting.
-
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
-
- ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
-
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- p action add 0 accept
- p action add 0 fwd 0
- p action add 0 count
- p action add 1 accept
- p action add 1 fwd 1
- p action add 1 count
- p action add 2 drop
- p action add 2 count
- p action add 0 conntrack
- p action add 1 conntrack
- p action add 2 conntrack
- p action add 3 conntrack
- ; IPv4 rules
- p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
- p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
- p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
- p vfw applyruleset
-
+ cd <samplevnf>/VNFs/vFW/config
+ Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting.
+
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
+
+ ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ p action add 0 accept
+ p action add 0 fwd 0
+ p action add 0 count
+ p action add 1 accept
+ p action add 1 fwd 1
+ p action add 1 count
+ p action add 2 drop
+ p action add 2 count
+ p action add 0 conntrack
+ p action add 1 conntrack
+ p action add 2 conntrack
+ p action add 3 conntrack
+ ; IPv4 rules
+ p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
+ p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
+ p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
+ p vfw applyruleset
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vFW/
- ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc
+ cd <samplevnf>/VNFs/vFW/
+ ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc
step 4: Run Test using traffic geneator
@@ -319,58 +328,58 @@ a) Bind ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vACL/config
- Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
-
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
-
- ; routeadd <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
-
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- p action add 0 accept
- p action add 0 fwd 0
- p action add 0 count
- p action add 1 accept
- p action add 1 fwd 1
- p action add 1 count
- p action add 2 drop
- p action add 2 count
- p action add 0 conntrack
- p action add 1 conntrack
- p action add 2 conntrack
- p action add 3 conntrack
- ; IPv4 rules
- p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
- p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
- p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
- p acl applyruleset
+ cd <samplevnf>/VNFs/vACL/config
+ Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
+
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
+
+ ; routeadd <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ p action add 0 accept
+ p action add 0 fwd 0
+ p action add 0 count
+ p action add 1 accept
+ p action add 1 fwd 1
+ p action add 1 count
+ p action add 2 drop
+ p action add 2 count
+ p action add 0 conntrack
+ p action add 1 conntrack
+ p action add 2 conntrack
+ p action add 3 conntrack
+ ; IPv4 rules
+ p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
+ p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
+ p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
+ p acl applyruleset
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vFW/
- ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc.
+ cd <samplevnf>/VNFs/vFW/
+ ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc.
step 4: Run Test using traffic geneator
@@ -404,70 +413,72 @@ Step 3: Bind the datapath ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vCGNAPT/config
- Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting.
+ cd <samplevnf>/VNFs/vCGNAPT/config
+ Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting.
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
- ; uncomment to enable static NAPT
- ;p <cgnapt pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port>
- ;p 5 entry addm 202.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535
+ ; uncomment to enable static NAPT
+ ;p <cgnapt pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port>
+ ;p 5 entry addm 202.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535
- ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+ ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
- (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay)
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
+ (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay)
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vCGNAPT/
- ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg -s ./config/sample_swlb_2port_2WT.tc
+ cd <samplevnf>/VNFs/vCGNAPT/
+ ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg -s ./config/sample_swlb_2port_2WT.tc
+ d) Run UDP_replay to reflect the traffic on public side.
+ cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
+ e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
step 4: Run Test using traffic geneator
- On traffic generator system:
+ On traffic generator system:
::
+ cd <trex eg v2.28/stl>
+ Update the bench.py to generate the traffic.
- cd <trex eg v2.28/stl>
- Update the bench.py to generate the traffic.
-
- class STLBench(object):
- ip_range = {}
- ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'}
- ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'}
- cd <trex eg v2.28>
- Run the TRex server: sudo ./t-rex-64 -i -c 7
- In another shell run TRex console: trex-console
- The console can be run from another computer with -s argument, --help for more info.
- Other options for TRex client are automation or GUI
- In the console, run "tui" command, and then send the traffic with commands like:
- start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
- For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
+ class STLBench(object):
+ ip_range = {}
+ ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'}
+ ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'}
+ cd <trex eg v2.28>
+ Run the TRex server: sudo ./t-rex-64 -i -c 7
+ In another shell run TRex console: trex-console
+ The console can be run from another computer with -s argument, --help for more info.
+ Other options for TRex client are automation or GUI
+ In the console, run "tui" command, and then send the traffic with commands like:
+ start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
+ For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
UDP_Replay - How to run
@@ -479,19 +490,19 @@ Step 3: Bind the datapath ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/UDP_Replay/
- cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
- e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
+ cd <samplevnf>/VNFs/UDP_Replay/
+ cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
+ e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
step 4: Run Test using traffic geneator
@@ -592,6 +603,7 @@ application is configured using a .cfg file. The core mask and number
of channels is derived from this config. For example, to run the
application from the source directory execute:
+::
user@target:~$ ./build/prox -f ./config/nop.cfg
Provided example configurations
@@ -604,24 +616,29 @@ A quick description of these example configurations is provided below.
Additional details are provided in the example configuration files.
Basic configurations, mostly used as sanity check:
-- config/nop.cfg
-- config/nop-rings.cfg
-- gen/nop-gen.cfg
+
+::
+ - config/nop.cfg
+ - config/nop-rings.cfg
+ - gen/nop-gen.cfg
Simplified BNG (Border Network Gateway) configurations, using different
number of ports, with and without QoS, running on the host or in a VM:
-- config/bng-4ports.cfg
-- config/bng-8ports.cfg
-- config/bng-qos-4ports.cfg
-- config/bng-qos-8ports.cfg
-- config/bng-1q-4ports.cfg
-- config/bng-ovs-usv-4ports.cfg
-- config/bng-no-cpu-topology-4ports.cfg
-- gen/bng-4ports-gen.cfg
-- gen/bng-8ports-gen.cfg
-- gen/bng-ovs-usv-4ports-gen.cfg
+
+::
+ - config/bng-4ports.cfg
+ - config/bng-8ports.cfg
+ - config/bng-qos-4ports.cfg
+ - config/bng-qos-8ports.cfg
+ - config/bng-1q-4ports.cfg
+ - config/bng-ovs-usv-4ports.cfg
+ - config/bng-no-cpu-topology-4ports.cfg
+ - gen/bng-4ports-gen.cfg
+ - gen/bng-8ports-gen.cfg
+ - gen/bng-ovs-usv-4ports-gen.cfg
Light-weight AFTR configurations:
-- config/lw_aftr.cfg
-- gen/lw_aftr-gen.cfg
+::
+ - config/lw_aftr.cfg
+ - gen/lw_aftr-gen.cfg
diff --git a/docs/testing/user/userguide/06-How_to_use_REST_api.rst b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
index 53726464..658f99d3 100644
--- a/docs/testing/user/userguide/06-How_to_use_REST_api.rst
+++ b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
@@ -4,7 +4,7 @@
.. (c) opnfv, national center of scientific research "demokritos" and others.
========================================================
-REST API - Readme
+REST API
========================================================
Introduction
@@ -65,128 +65,81 @@ Civetweb exposes a few functions which are used to resgister custom handlers
for different URI’s that are implemented.
Typical usage is shown below
-
-VNF Application init()
-=========================
-
-Initialize the civetweb library
-================================
-
-mg_init_library(0);
-
-Start the web server
-=====================
-ctx = mg_start(NULL, 0, options);
-
-
-Once the civetweb server is started we can register our URI’s as show below
-mg_set_request_handler(ctx, "/config", static_cfg_handler, 0);
-
-In the above example “/config” is the URI & static_cfg_handler() is
-the handler that gets called when a user invokes this URI through
-the HTTP client. API's have been mostly implemented for existing VNF's
-like vCGNAPT, vFW & vACL. you might want to implement custom handlers
-for your VNF.
-
URI definition for different VNF’s
-===================================
-
-
-URI REST Method Arguments Description
-===========================================================================================================================
-/vnf GET None Displays top level methods available
-
-/vnf/config GET None Displays the current config set
- POST pci_white_list: Command success/failure
- num_worker(o):
- vnf_type(o):
- pkt_type (o):
- num_lb(o):
- sw_lb(o):
- sock_in(o):
- hyperthread(o) :
-
-/vnf/config/arp GET None Displays ARP/ND info
- POST action: <add/del/req> Command success/failure
- ipv4/ipv6: <address>
- portid: <>
- macaddr: <> for add
-
-/vnf/config/link GET None
- POST link_id:<> Command success/failure
- state: <1/0>
-
-/vnf/config/link/<link id> GET None
- POST ipv4/ipv6: <address> Command success/failure
- depth: <>
-
-
-/vnf/config/route GET None Displays gateway route entries
- POST portid: <> Adds route entries for default gateway
- nhipv4/nhipv6: <addr>
- depth: <>
- type:"net/host"
-
-/vnf/config/rules(vFW/vACL only) GET None Displays the methods /load/clear
-/vnf/config/rules/load GET None Displays if file was loaded
- PUT <script file
- with cmds> Executes each command from script file
-/vnf/config/rules/clear GET None Command success/failure clear the stat
-
-/vnf/config/nat(vCGNAPT only) GET None Displays the methods /load/clear
-/vnf/config/nat/load GET None Displays if file was loaded
- PUT <script file
- with commands> Executes each command from script file
-
-/vnf/config/nat/clear GET None Command success/failure clear the stats
-/vnf/log GET None This needs to be implemented for each VNF
- just keeping this as placeholder.
-
-/vnf/dbg GET None Will display methods supported like /pipelines/cmd
-/vnf/dbg/pipelines GET None Displays pipeline information(names)
- of each pipelines
-/vnf/dbg/pipelines/<pipe id> GET None Displays debug level for particular pipeline
-
-/vnf/dbg/cmd GET None Last executed command parameters
- POST cmd: Command success/failure
- dbg:
- d1:
- d2:
+----------------------------------
+::
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ | **URI** | **REST Method** | **Arguments** |**Description** |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf | GET | None |Displays top level methods available |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config | GET | None |Displays the current config set |
+ | | POST | pci_white_list: | |
+ | | | num_worker(o): | |
+ | | | vnf_type(o): | |
+ | | | pkt_type (o): | |
+ | | | num_lb(o): | |
+ | | | sw_lb(o): | |
+ | | | sock_in(o): | |
+ | | | hyperthread(o): | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/arp | GET | None |Displays ARP/ND info |
+ | | POST | action: <add/del/req> | |
+ | | | ipv4/ipv6: <address> | |
+ | | | portid: <> | |
+ | | | macaddr: <> for add | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/link | GET | None | |
+ | | POST | link_id:<> | |
+ | | | state: <1/0> | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/link/<link id> | GET | None | |
+ | | POST | ipv4/ipv6: <address> | |
+ | | | depth: <> | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/route | GET | None |Displays gateway route entries |
+ | | POST | portid: <> |Adds route entries for default gateway |
+ | | | nhipv4/nhipv6: <addr> | |
+ | | | depth: <> | |
+ | | | type:"net/host" | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/rules(vFW/vACL only) | GET | None |Displays the methods /load/clear |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/rules/load | GET | None |Displays if file was loaded |
+ | | PUT | <script file | |
+ | | | with cmds> |Executes each command from script file |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/rules/clear | GET | None | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/nat(vCGNAPT only) | GET | None |Displays the methods /load/clear |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/nat/load | GET | None |Displays if file was loaded |
+ | | PUT | <script file with cmds> | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/config/nat/clear | GET | None | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/log | GET | None |This needs to be implemented for each VNF |
+ | | | | just keeping this as placeholder. |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/dbg | GET | None |Will display methods supported like /pipelines/cmd |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/dbg/pipelines | GET | None |Displays pipeline information(names) |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/dbg/pipelines/<pipe id> | GET | None |Displays debug level for particular pipeline |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+ |/vnf/dbg/cmd | GET | None |Last executed command parameters |
+ | | POST | cmd: | |
+ | | | dbg: | |
+ | | | d1: | |
+ | | | d2: | |
+ +---------------------------------+-----------------+--------------------------+----------------------------------------------------+
+
+ PUT/POST - Command success/failure
API Usage
===============
-1. Initialization
-================
-
-In order to integrate to your VNF these are the steps required
-
-In your VNF application init
-
-
-#ifdef REST_API_SUPPORT
- Initialize the rest api
- struct mg_context *ctx = rest_api_init(&app);
-#endif
-
-
-#ifdef REST_API_SUPPORT
- rest api's for cgnapt
- rest_api_<vnf>_init(ctx, &app);
-#endif
-
-
-void rest_api_<vnf>_init(struct mg_context *ctx, struct app_params *app)
-{
- myapp = app;
-
- VNF specific command registration
- mg_set_request_handler(,,,);
-
-}
-
-
-2. Run time Usage
+1. Run time Usage
====================
An application(say vFW) with REST API support is run as follows
@@ -194,114 +147,112 @@ with just PORT MASK as input. The following environment variables
need to be set before launching the application(To be run from
samplevnf directory).
-export VNF_CORE=`pwd`
-export RTE_SDK=`pwd`/dpdk-16.04
-export RTE_TARGET=x86_64-native-linuxapp-gcc
+::
+ ./build/vFW (Without the -f & -s option)
-./build/vFW (Without the -f & -s option)
+1. When VNF(vCGNAPT/vACL/vFW) is launched it waits for user to provide the /vnf/config REST method.
-1. When VNF(vCGNAPT/vACL/vFW) is launched it waits for user to provide the
-/vnf/config REST method. A typical curl command if used will look like below
-shown. This with minimal parameter. For more options please refer to above REST
-methods table.
+ ::
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:08:00.0 0000:08:00.1"}' http://<IP>/vnf/config
-e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:08:00.0
- 0000:08:00.1"}' http://<IP>/vnf/config
+ Note: the config is mostly implemented based on existing VNF's. if new parameters
+ are required in the config we need to add that as part of the vnf_template.
-Note: the config is mostly implemented based on existing VNF's. if new parameters
-are required in the config we need to add that as part of the vnf_template.
+ Once the config is provided the application gets launched.
-Once the config is provided the application gets launched.
+ Note for CGNAPT we can add public_ip_port_range as follows, the following e.g gives
+ a multiport configuration with 4 ports, 2 load balancers, worker threads 10, multiple
+ public_ip_port_range being added, please note the "/" being used to seperate multiple
+ inputs for public_ip_port_range.
-Note for CGNAPT we can add public_ip_port_range as follows, the following e.g gives
-a multiport configuration with 4 ports, 2 load balancers, worker threads 10, multiple
-public_ip_port_range being added, please note the "/" being used to seperate multiple
-inputs for public_ip_port_range.
-
-e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:05:00.0 0000:05:00.2 0000:07:00.0 0000:07:00.2",
- "num_lb":"2", "num_worker":"10","public_ip_port_range_0": "04040000:(1, 65535)/04040001:(1, 65535)",
- "public_ip_port_range_1": "05050000:(1, 65535)/05050001:(1, 65535)" }' http://10.223.197.179/vnf/config
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:05:00.0 0000:05:00.2 0000:07:00.0 0000:07:00.2",
+ "num_lb":"2", "num_worker":"10","public_ip_port_range_0": "04040000:(1, 65535)/04040001:(1, 65535)",
+ "public_ip_port_range_1": "05050000:(1, 65535)/05050001:(1, 65535)" }' http://10.223.197.179/vnf/config
2. Check the Link IP's using the REST API (vCGNAPT/vACL/vFW)
-e.g curl <IP>/vnf/config/link
-This would indicate the number of links enabled. You should enable all the links
-by using following curl command for links 0 & 1
+ ::
+ e.g curl <IP>/vnf/config/link
+
+ This would indicate the number of links enabled. You should enable all the links
+ by using following curl command for links 0 & 1
-e.g curl -X POST -H "Content-Type:application/json" -d '{"linkid": "0", "state": "1"}'
-http://<IP>/vnf/config/link
-curl -X POST -H "Content-Type:application/json" -d '{"linkid": "1", "state": "1"}'
-http://<IP>/vnf/config/link
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"linkid": "0", "state": "1"}'
+ http://<IP>/vnf/config/link
+ curl -X POST -H "Content-Type:application/json" -d '{"linkid": "1", "state": "1"}'
+ http://<IP>/vnf/config/link
3. Now that links are enabled we can configure IP's using link method as follows (vCGNAPT/vACL/vFW)
-e.g curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"<IP to be configured>","depth":"24"}'
-http://<IP>/vnf/config/link/0
-curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"IP to be configured","depth":"24"}'
-http://<IP>/vnf/config/link/1
+ ::
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"<IP to be configured>","depth":"24"}'
+ http://<IP>/vnf/config/link/0
+ curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"IP to be configured","depth":"24"}'
+ http://<IP>/vnf/config/link/1
-Once the IP's are set in place time to add NHIP for ARP Table. This is done using for all the ports
-required.
-/vnf/config/route
+ Once the IP's are set in place time to add NHIP for ARP Table. This is done using for all the ports required.
+ /vnf/config/route
-curl -X POST -H "Content-Type:application/json" -d '{"portid":"0", "nhipv4":"IPV4 address",
- "depth":"8", "type":"net"}' http://<IP>/vnf/config/route
+ curl -X POST -H "Content-Type:application/json" -d '{"portid":"0", "nhipv4":"IPV4 address",
+ "depth":"8", "type":"net"}' http://<IP>/vnf/config/route
4. Adding arp entries we can use this method (vCGNAPT/vACL/vFW)
-/vnf/config/arp
+ ::
+ /vnf/config/arp
-e.g
-
-curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"202.16.100.20",
+ e.g
+ curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"202.16.100.20",
"portid":"0", "macaddr":"00:00:00:00:00:01"}'
http://10.223.166.213/vnf/config/arp
-curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"172.16.40.20",
+ curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"172.16.40.20",
"portid":"1", "macaddr":"00:00:00:00:00:02"}'
http://10.223.166.213/vnf/config/arp
5. Adding route entries we can use this method (vCGNAPT/vACL/vFW)
-vnf/config/route
+ ::
+ /vnf/config/route
-e.g curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":"8", "nhipv4":"202.16.100.20",
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":"8", "nhipv4":"202.16.100.20",
"portid":"0"}' http://10.223.166.240/vnf/config/route
-curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":8", "nhipv4":"172.16.100.20",
+ curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":8", "nhipv4":"172.16.100.20",
"portid":"1"}' http://10.223.166.240/vnf/config/route
5. In order to load the rules a script file needs to be posting a script.(vACL/vFW)
-/vnf/config/rules/load
+ ::
+ /vnf/config/rules/load
-Typical example for loading a script file is shown below
-curl -X PUT -F 'image=@<path to file>' http://<IP>/vnf/config/rules/load
+ Typical example for loading a script file is shown below
+ curl -X PUT -F 'image=@<path to file>' http://<IP>/vnf/config/rules/load
-typically arpadd/routeadd commands can be provided as part of this to
-add static arp entries & adding route entries providing the NHIP's.
+ typically arpadd/routeadd commands can be provided as part of this to
+ add static arp entries & adding route entries providing the NHIP's.
6. The following REST api's for runtime configuring through a script (vCGNAPT Only)
-/vnf/config/rules/clear
-/vnf/config/nat
-/vnf/config/nat/load
+ ::
+ /vnf/config/rules/clear
+ /vnf/config/nat
+ /vnf/config/nat/load
7. For debug purpose following REST API's could be used as described above.(vCGNAPT/vACL/vFW)
+ ::
+ /vnf/dbg
+ e.g curl http://10.223.166.240/vnf/config/dbg
-/vnf/dbg
-
-e.g curl http://10.223.166.240/vnf/config/dbg
+ /vnf/dbg/pipelines
+ e.g curl http://10.223.166.240/vnf/config/dbg/pipelines
-/vnf/dbg/pipelines
-e.g curl http://10.223.166.240/vnf/config/dbg/pipelines
+ /vnf/dbg/pipelines/<pipe id>
+ e.g curl http://10.223.166.240/vnf/config/dbg/pipelines/<id>
-/vnf/dbg/pipelines/<pipe id>
-e.g curl http://10.223.166.240/vnf/config/dbg/pipelines/<id>
-
-/vnf/dbg/cmd
+ /vnf/dbg/cmd
8. For stats we can use the following method (vCGNAPT/vACL/vFW)
-
-/vnf/stats
-e.g curl <IP>/vnf/stats
+ ::
+ /vnf/stats
+ e.g curl <IP>/vnf/stats
9. For quittiong the application (vCGNAPT/vACL/vFW)
-/vnf/quit
-
-e.g curl <IP>/vnf/quit
+ ::
+ /vnf/quit
+ e.g curl <IP>/vnf/quit
diff --git a/docs/testing/user/userguide/07-Config_files.rst b/docs/testing/user/userguide/07-Config_files.rst
index 9061ee57..4f3811ec 100644
--- a/docs/testing/user/userguide/07-Config_files.rst
+++ b/docs/testing/user/userguide/07-Config_files.rst
@@ -20,9 +20,127 @@ Following are the example configuration files for sampleVNFs.
vCGNAPT Config files
--------------------
+The reference configuration files explained here are for Software and Hardware
+loadbalancing with IPv4 traffic type and single port pair.
+For other configurations liek IPv6 and Multi-port, refer to example config
+files provided as part of the source code in config(VNFs/vCGNAPT/config) folder
+of the VNFs.
+
+1. SWLB, IPv4, Single Port Pair, 1WT:
+
+ ::
+ [EAL]
+ w = 05:00.0
+ w = 05:00.1
+
+ [PIPELINE0]
+ type = MASTER
+ core = 0
+
+ [PIPELINE1]
+ type = ARPICMP
+ core = 1
+ pktq_in = SWQ0
+ pktq_out = SWQ7
+
+ pktq_in_prv = RXQ0.0
+ prv_to_pub_map = (0, 1)
+
+ [PIPELINE2]
+ type = TIMER
+ core = 2
+ n_flows = 1048576
+
+ [PIPELINE3]
+ type = TXRX
+ core = 3
+ pipeline_txrx_type = RXRX
+ dest_if_offset = 176
+ pktq_in = RXQ0.0 RXQ1.0
+ pktq_out = SWQ1 SWQ2 SWQ0
+ [PIPELINE4]
+ type = LOADB
+ core = 4
+ pktq_in = SWQ1 SWQ2
+ pktq_out = SWQ3 SWQ4
+ outport_offset = 136; 8
+ n_vnf_threads = 1
+ prv_que_handler = (0,)
+ [PIPELINE5]
+ type = CGNAPT
+ core = 5
+ pktq_in = SWQ3 SWQ4
+ pktq_out = SWQ5 SWQ6
+ phyport_offset = 204
+ n_flows = 1048576
+ key_offset = 192;64
+ key_size = 8
+ hash_offset = 200;72
+ timer_period = 100
+ max_clients_per_ip = 65535
+ max_port_per_client = 10
+ public_ip_port_range = 98103214:(1, 65535)
+ vnf_set = (3,4,5)
+ pkt_type = ipv4
+ cgnapt_meta_offset = 128
+ prv_que_handler = (0,)
+ [PIPELINE6]
+ type = TXRX
+ core = 6
+ pipeline_txrx_type = TXTX
+ dest_if_offset = 176
+ pktq_in = SWQ5 SWQ6
+ pktq_out = TXQ0.0 TXQ1.0
+
+2. HWLB, IPv4, Single Port Pair, 1 WT:
+
+This configuration doesn't require LOADB and TXRX pipelines
+
+::
+ [EAL]
+ w = 05:00.0
+ w = 05:00.1
+
+ [PIPELINE0]
+ type = MASTER
+ core = 0
+
+ [PIPELINE1]
+ type = ARPICMP
+ core = 1
+ pktq_in = SWQ0
+ pktq_out = TXQ0.0 TXQ1.0
+
+
+ pktq_in_prv = RXQ0.0
+ prv_to_pub_map = (0, 1)
+
+ [PIPELINE2]
+ type = TIMER
+ core = 2
+ n_flows = 1048576
+
+ [PIPELINE3]
+ type = CGNAPT
+ core = 3
+ pktq_in = RXQ0.0 RXQ1.0
+ pktq_out = TXQ0.1 TXQ1.1 SWQ0
+ phyport_offset = 204
+ n_flows = 1048576
+ key_offset = 192;64
+ key_size = 8
+ hash_offset = 200;72
+ timer_period = 100
+ max_clients_per_ip = 65535
+ max_port_per_client = 10
+ public_ip_port_range = 98103214:(1, 65535)
+ vnf_set = (3,4,5)
+ pkt_type = ipv4
+ cgnapt_meta_offset = 128
+ prv_que_handler = (0,)
vFW Config files
----------------
@@ -355,6 +473,3 @@ of the VNFs.
n_flows = 1000000
pkt_type = ipv4
traffic_type = 4
-
-
-
diff --git a/docs/testing/user/userguide/09-prox.rst b/docs/testing/user/userguide/09-prox.rst
new file mode 100644
index 00000000..4d5444c0
--- /dev/null
+++ b/docs/testing/user/userguide/09-prox.rst
@@ -0,0 +1,479 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) OPNFV, Intel Corporation and others.
+
+PROX - Packet pROcessing eXecution engine.
+==========================================
+
+Change since previous release, support has been added for the following:
+
+8 workloads for automated dataplane benchmarking using DATS
+Support DPDK 17.05
+L4 stateful traffic generation and flow extraction tool
+lua configuration files for easy table population
+New modes: impair, lb5tuple, mirror, nat, decapnsh, encapnsh and genl4
+helper script for automated VM core pinning for Qemu
+New screens for viewing information regarding DPDK rings (screen 5) and L4 generation (screen 6)
+Improved command editing using libedit
+Improved ncurses display
+Rename of dppd-bng zip file to dppd-prox
+Latency histogram collection
+
+PROX COMMANDS AND SCREENS
+-------------------------
+::
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | **RUNTIME COMMAND** | **DESCRIPTION** | **EXAMPLE** |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |quit | Stop all cores and quit | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |help <substr> | Show list of commands that have <substr> as a substring. | |
+ | | If no substring is provided, all commands are shown. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |verbose <level> | Set the verbosity level of some printed messages. | |
+ | | Possible values are: 0 (default value, error messages only), | verbose 1 |
+ | | 1 (+ warnings), 2 (+ info) and 3 (+ debugging) | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |thread info <core_id> <task_id> | Show task specific information | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |update interval <value> | Update statistics refresh rate, in msec (must be >=10). | |
+ | | Default is 1 second | update interval 500 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rx tx info | Print connections between tasks on all cores | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |start <core list>|all <task_id> | Start cores specified in <core list> or all cores. | start all |
+ | | If <task_id> is not specified, all tasks for the specified cores | start 1 |
+ | | will be started. | start 1s0-4s0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |stop <core list>|all <task_id> | Stop cores specified in <core list> or all cores. | |
+ | | If <task_id> is not specified, all tasks for the specified | stop 1 |
+ | | cores will be stopped. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |dump <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <core_id> | dump 2 1 5 |
+ | | showing how packets have changed between RX and TX. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |dump_rx <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <coreid> at RX | dump_rx 2 1 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |dump_tx <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <coreid> at TX | dump_tx 2 1 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rx distr start | Start gathering statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rx distr stop | Stop gathering statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rx distr reset | Reset gathered statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rx distr show | Display gathered statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rate <port id> <queue id> <rate> | Set transmit rate in Mb/s. This does not include preamble, SFD and IFG | rate 0 0 1000 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |count <core id> <task id> <count> | Generate <count> packets, then pause generating | count 1 0 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |pkt_size <coreid> <taskid> <pktsize> | Set the packet size to <pkt_size> | pkt_size 1 3 255 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |speed <core_id> <task_id> <speed percentage> | Change the speed to <speed percentage> of a |
+ | | 10 Gbps line at which packets are being generated | speed 1 0 50 |
+ | | on core <core_id> in task <task_id> |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |speed_byte <core_id> <task_id> <speed> | Change speed to <speed>. The speed is specified in units of bytes per sec | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |set value <core_id> <task_id> <offset> | Set <value_len> bytes to <value> at offset <offset> in packets | |
+ | <value> <value_len> | generated on <core_id> <task_id> | set value 4 1 14 10 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | reset values all | Undo all `set value` commands on all cores/tasks | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |reset values <core id> <task id> | Undo all `set value` commands on specified core/task | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |arp add <core id> <task id> <port id> | | |
+ | <gre id> <svlan> <cvlan> <ip addr> | | |
+ | <mac addr> <user> | Add a single ARP entry into a CPE table on <core id>/<task id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |rule add <core id> <task id> svlan_id&mask | | |
+ | cvlan_id&mask ip_proto&mask | | |
+ | source_ip/prefix destination_ip/prefix | | |
+ | range dport_range action | Add a rule to the ACL table on <core id>/<task id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |route add <core id> <task id> | | |
+ | <ip/prefix> <next hop id> | Add a route to the routing table on core <core id> <task id> | route add 10.0.16.0/24 9 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |reset stats | Reset all statistics | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |tot stats | Print total RX and TX packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |tot ierrors per sec | Print total number of ierrors per second | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |pps stats | Print RX and TX packet rate in unit of packet per second | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |lat stats <core id> <task id> | Print min,max,avg latency as measured during last sampling interval | lat stats 1 0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |lat packets <core id> <task id> | Print the latency for each of the last set of packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |core stats <core id> <task id> | Print rx/tx/drop for task <task id> running on core <core id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | |
+ | | tx_pkts and totals for RX, TX, no_mbufs ierrors for port <port id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |ring info all | Get information about ring, such as ring size and | |
+ | | number of elements in the ring | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |ring info <core id> <task id> | Get information about ring on core <core id> | |
+ | | in task <task id>, such as ring size and number of elements in the ring | ring info 1 0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port info <port id> [brief] | Get port related information, such as MAC address, socket, | |
+ | | number of descriptors..., . Adding `brief` after command | |
+ | | prints short version of output. | port info 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port up <port id> | Set the port up (all ports are up at startup) | port up 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port down <port id> | Set the port down | port down 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port xstats <port id> | Get extra statistics for the port | port xstats 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |version | Show version | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ |port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | |
+ | | tx_pkts and totals for RX, TX, no_mbufs ierrors for port <port id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+
+While PROX is running, F1 to F6 change the view on the system. Pressing F1 switches to the main screen showing per core statistics. When PROX is started,
+this is the screen shown by default. Pressing F2 switches to show port-based information. Pressing F3 shows information (i.e. occupancy, memory usage, ...)
+about memory pools. If there are tasks with mode=lat, F4 displays latency measurements made during the last second by each of those tasks.
+F5 displays DPDK ring information. F6 is for L4 generation. If no command has been entered, numbers 1 to 6 can also be used to change the view on the system.
+This is provided to allow changing screens in environments that do not pass function keys to PROX.
+
+Page Up and Page Down can be used to view per core statistics that would otherwise not fit on the screen. Escape quits PROX.
+The history of previously entered commands can be navigated using the Up and Down arrows. Statistics can be reset with F12.
+
+COMMAND LINE OPTIONS
+--------------------
+Run PROX with the "--help" argument to display the usage text and the list of supported options as shown below.
+PROX supports many compilation flags to enable or disable features. For these flags, refer to the Makefile.
+Refer to the README file for more information on how to run PROX for specific use cases.
+
+::
+
+ Usage: ./build/prox [-f CONFIG_FILE] [-l LOG_FILE] [-p] [-o DISPLAY] [-v] [-a|-e] [-m|-s|-i] [-n] [-w DEF] [-q] [-k] [-d] [-z] [-r VAL] [-u] [-t]
+ -f CONFIG_FILE : configuration file to load, ./prox.cfg by default
+ -l LOG_FILE : log file name, ./prox.log by default
+ -p : include PID in log file name if default log file is used
+ -o DISPLAY: Set display to use, can be 'curses' (default), 'cli' or 'none'
+ -v verbosity : initial logging verbosity
+ -a : autostart all cores (by default)
+ -e : don't autostart
+ -n : Create NULL devices instead of using PCI devices, useful together with -i
+ -m : list supported task modes and exit
+ -s : check configuration file syntax and exit
+ -i : check initialization sequence and exit
+ -u : Listen on UDS /tmp/prox.sock
+ -t : Listen on TCP port 8474
+ -q : Pass argument to Lua interpreter, useful to define variables
+ -w : define variable using syntax varname=value
+ takes precedence over variables defined in CONFIG_FILE
+ -k : Log statistics to file "stats_dump" in current directory
+ -d : Run as daemon, the parent process will block until PROX is not initialized
+ -z : Ignore CPU topology, implies -i
+ -r : Change initial screen refresh rate. If set to a lower than 0.001 seconds,
+ screen refreshing will be disabled
+
+CONFIGURATION FILE FORMAT
+-------------------------
+The configuration file is divided into multiple sections, each of which is used to define some parameters and options.
+Sections are created using the [section name] syntax. The list of sections, where # represents an integer, is as follows:
+
+::
+ [eal options]
+ [port #]
+ [variables]
+ [defaults]
+ [global]
+ [core #]
+
+In each section, entries are created using the key=value syntax.
+Comments are created using the ; symbol: all characters from the ;
+symbol to the end of line are ignored. A # symbol at the beginning of the section name comments
+the whole section out: all entries in the section are treated as comments and are ignored. For example:
+
+::
+ [#core 1]
+ ; this is a comment
+ parameter name=parameter value ; this entry is ignored because the section is commented out
+
+[EAL OPTIONS]
+The following parameters are supported:
+
+::
+ -m ; Specifies the amount of memory used. If not provided, all hugepages will be used.
+ -n ; Specifies the number of memory channels. Use -n4 for latest Intel Xeon based platforms
+ -r ; Specifies the number of memory ranks.
+ eal ; Specifies DPDK EAL extra options. Those options will be passed blindly to DPDK.
+
+[PORT #]
+DPDK ports are usually referenced by their port_id, i.e. an integer starting from 0.
+Using port_id in the configuration file is tedious, since the same port_id can appear at
+different places (rx port, tx port, routing tables),
+and those ports might change (e.g. if cables are swapped).
+In order to make the configuration file easier to read and modify,
+DPDK ports are given a name with the name= option.
+The name serves as the reference, and in addition, it will show up in the display at runtime.
+
+::
+ PARAMETER EXAMPLE DESCRIPTION
+ ----------------------------------------------------------------------------
+ name inet0 Use inet0 to later refer to this port
+ mac hardware value can be: hardware, random or a literal MAC address
+ rx desc 256 number of descriptors to allocate for reception
+ tx desc 256 number of descriptors to allocate for transmission
+ promiscuous yes enable promiscuous mode
+ strip crc yes enable CRC stripping
+ rss yes enable RSS
+ lsc no While lsc is disabled for drivers known to not provide support,
+ this option explicitely overrides these settings.
+ rx_ring dpdk_ring_name use DPDK ring as an interface (receive side)
+ tx_ring dpdk_ring_name use DPDK ring as an interface (transmit side)
+
+[VARIABLES]
+Variables can be defined in the configuration file using the $varname=value syntax.
+Variables defined on the command line (-w varname=value) take precedence and do not
+create conflicts with variables defined in the configuration file. Variables are
+used in the configuration file using the $varname syntax: each instance of $varname
+is replaced by its associated value. This is typically useful if the same parameter
+must be used at several places. For instance, you might want to have multiple load
+balancers, all transmitting to the same set of worker cores.
+The list of worker cores could then be defined once in a variable:
+
+::
+ [variables]
+ $wk=1s0-5s0
+
+Then, a load balancer definition would use the variable:
+
+::
+ [core 6s0]
+ name=LB
+ task=0
+ mode=lbnetwork
+ tx cores=$wk task=0
+ ...
+
+And the section defining the worker cores would be:
+
+::
+ [core $wk]
+ name=worker
+ task=0
+ mode=qinqencapv4
+ ...
+
+[DEFAULTS]
+The default value of some options can be overridden using the [defaults] section:
+
+::
+ PARAMETER EXAMPLE DESCRIPTION
+ -----------------------------------
+ mempool size 16K number of mbufs per task, relevant when task receives from a port.
+ this is the n argument provided to rte_mempool_create()
+ qinq tag 0xa888 Set qinq tag for all tasks. The result of adding this option is the
+ same as adding qinq tag= to each task
+ memcache size 128 number of mbufs cached per core, default is 256 this is the cache_size
+ argument provided to rte_mempool_create()
+
+[GLOBAL]
+The following parameters are supported:
+
+::
+ PARAMETER EXAMPLE DESCRIPTION
+ -------------------------------------------------
+ name BNG Name of the configuration, which will be shown in the title box at runtime.
+ start time 10 Time in seconds after which average statistics will be started.
+ Default value is 0.
+ duration time 30 Runtime duration in seconds, counted after start time.
+ This is typically useful to automate testing using
+ different parameters: PROX automatically exits when the
+ runtime duration has elapsed. Initialization and start time
+ are not included in this runtime duration.
+ For example, if start time is set to 10 and duration time is set to 30,
+ the total execution time (after initialization) will be 40 seconds.
+ Default value is 0, which means infinity and prevents PROX from automatically exiting.
+ shuffle yes When this parameter is set to yes, the order of mbufs
+ within mempools is randomized to simulate a system that has
+ been warmed up. Default value is no.
+ gre cfg /path/to/file.csv Path to CSV file that provides QinQ-to-GRE mapping.
+ Default value is gre_table.csv in same directory as
+ configuration file. Fields are GRE key and QinQ value (computed as SVLAN * 4096 + CVLAN).
+ pre cmd ls Arbitrary system commands to run while reading cfg. This option can occur multiple times.
+ user cfg /path/to/file.csv Path to CSV file that provides QinQ-to-User mapping.
+ Default value is user_table.csv in same directory as configuration file.
+ Fields are SVLAN, CVLAN and User-Id.
+ next hop cfg /path/to/file.csv Path to CSV file that provides Next-Hop details.
+ Default value is next_hop.csv in same directory as configuration file.
+ Fields are Next-Hop index (as returned by LPM lookup),
+ Out-Port index, Next-Hop IP (unused), Next-Hop MAC and MPLS label.
+ ipv4 cfg /path/to/file.csv Path to CSV file that provides IPv4 LPM routing table.
+ Default value is ipv4.csv in same directory as configuration file.
+ Fields are IPv4 subnet (in CIDR notation) and Next-Hop index.
+ dscp cfg /path/to/file.csv Path to CSV file that provides mapping for QoS classification,
+ from DSCP to Traffic Class and Queue.
+ Default value is dscp.csv in same directory as configuration file.
+ Fields are DSCP (0-63), Traffic Class (0-3) and Queue (0-3).
+ ipv6 tunnel cfg /path/to/file.csv Path to CSV file that provides lwAFTR binding table.
+ Default value is ipv6_tun_bind.csv in same directory as configuration file.
+ Fields are lwB4 IPv6 address, next hop MAC address towards lwB4,
+ IPv4 Public address and IPv4 Public Port Set.
+ acl cfg /path/to/file.csv Path to CSV file that provides ACL rules.
+ Default value is rules.csv in same directory as configuration file.
+ Fields are SVLAN value & mask, CVLAN value & mask, IP protocol value & mask,
+ source IPv4 subnet (in CIDR notation), destination IPv4 subnet (in CIDR notation),
+ source port range, destination port range, and action (drop, allow, rate limit).
+ unique mempool yes
+ per socket
+
+[CORE #]
+Cores can be configured by means of a set of [core #] sections, where # represents either:
+
+an absolute core number: e.g. on a 10-core, dual socket system with hyper-threading, cores are numbered from 0 to 39;
+a core number, the letter 's', and a socket number: this allows selecting per-socket cores, independently from their interleaved numbering;
+a core number and the letter 'h': this allows selecting the hyper-thread sibling of the specified core;
+a dash-separated range of core numbers;
+a comma-separated list of core numbers;
+any combination of the above;
+or a variable whose value complies with the above syntax.
+The socket and hyper-thread syntax makes it easier to use the same configuration file on several platforms,
+even if their core numbering differs (e.g. interleaving rule or number of cores per socket).
+
+Each core can be assigned with a set of tasks, each running one of the implemented packet processing modes.
+
+The following parameters are supported:
+.. image:: images/prox_core.png
+ :width: 1024px
+ :alt: SampleVNF supported topology
+
+INSTALLATION
+------------
+
+PREREQUISITES
+^^^^^^^^^^^^^
+DPDK must be installed prior to running make in the PROX directory.
+The README file shipped with PROX describes what versions of DPDK are supported,
+and if any patches are needed for the chosen DPDK version.
+
+The following packages need to be installed. (Example for destributions that are using rpm)
+
+::
+ sudo yum install net-tools wget gcc unzip libpcap-devel ncurses-devel libedit-devel pciutils lua-devel kernel-devel
+ Jump Start
+
+The following instructions are here to help customers to start using PROX.
+It's by no means a complete guide, for detailed instructions on how to install and use
+DPDK please refer to its documentation.
+Your mileage may vary depending on a particular Linux distribution and hardware in use.
+
+Edit grub default configuration:
+
+::
+ vi /etc/default/grub
+
+Add the following to the kernel boot parameters
+
+::
+ default_hugepagesz=1G hugepagesz=1G hugepages=8
+
+Rebuild grub config and reboot the system:
+
+::
+ grub2-mkconfig -o /boot/grub2/grub.cfg
+ reboot
+
+Verify that hugepages are available
+
+::
+ cat /proc/meminfo
+ ...
+ HugePages_Total: 8
+ HugePages_Free: 8
+ Hugepagesize: 1048576 kB
+ ...
+
+Re-mount huge pages
+
+::
+ mkdir -p /mnt/huge
+ umount `awk '/hugetlbfs/ { print $2 }' /proc/mounts` >/dev/null 2>&1
+ mount -t hugetlbfs nodev /mnt/huge/
+
+Add the following to the end of ~/.bashrc file
+
+::
+ export RTE_SDK=/root/dpdk
+ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_UNBIND=$RTE_SDK/tools/dpdk_nic_bind.py
+
+Re-login or source that file
+
+::
+ . ~/.bashrc
+
+Build DPDK
+
+::
+ git clone http://dpdk.org/git/dpdk
+ cd dpdk
+ git checkout v1.8.0
+ make install T=$RTE_TARGET
+
+Load uio module
+
+::
+ lsmod | grep -w "^uio" >/dev/null 2>&1 || sudo modprobe uio
+ sleep 1
+
+Load igb_uio module
+
+::
+ lsmod | grep -w "^igb_uio" >/dev/null 2>&1 || sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
+
+Discover network devices available on the system:
+
+::
+ lspci | grep Ethernet
+
+Prior launching PROX, ports that are to be used by it must be bound to the igb_uio driver.
+
+The following command will bind all Intel® Ethernet Converged Network Adapter X710 ports to igb_uio:
+
+::
+ lspci | grep X710 | cut -d' ' -f 1 | sudo xargs -I {} python2.7 $RTE_UNBIND --bind=igb_uio {}
+
+The following command will bind all Intel® 82599 10 Gigabit Ethernet Controller ports to igb_uio:
+
+::
+ lspci | grep 82599 | cut -d' ' -f 1 | sudo xargs -I {} python2.7 $RTE_UNBIND --bind=igb_uio {}
+
+COMPILING AND RUNNING PROX
+--------------------------
+
+Download and extract the PROX archive
+
+::
+ wget https://01.org/sites/default/files/downloads/intel-data-plane-performance-demonstrators/dppd-prox-v021.zip
+ unzip dppd-prox-v021.zip
+ cd dppd-prox-v021
+
+Build the PROX
+
+::
+ make
+
+The set of sample configuration files can be found in:
+
+::
+ ./config/*
+
+PROX generation sample configs are in:
+
+::
+ ./gen/*
+
+To launch PROX one may use the following command as an example, assuming the current directory is where you've just built PROX:
+
+::
+ ./build/prox -f ./config/handle_none.cfg
diff --git a/docs/testing/user/userguide/images/prox_core.png b/docs/testing/user/userguide/images/prox_core.png
new file mode 100644
index 00000000..5d85454d
--- /dev/null
+++ b/docs/testing/user/userguide/images/prox_core.png
Binary files differ
diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst
index 8d797627..e8acf532 100644
--- a/docs/testing/user/userguide/index.rst
+++ b/docs/testing/user/userguide/index.rst
@@ -20,5 +20,6 @@ SampleVNF User Guide
06-How_to_use_REST_api
07-Config_files
08-CLI_Commands_Reference
+ 09-Prox
glossary
references