Docs: Review and update the docs for E-release

JIRA: SAMPLEVNF-82

Review and update the the E-release docsuments.

Change-Id: I1eeb0dead18559b8f05039b81512d944a862bbb4
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>

8 files changed, 829 insertions, 148 deletions

diff --git a/docs/testing/user/userguide/01-introduction.rst b/docs/testing/user/userguide/01-introduction.rst
index 1a60fb58..ab79e931 100755
--- a/docs/testing/user/userguide/01-introduction.rst
+++ b/docs/testing/user/userguide/01-introduction.rst
@@ -20,16 +20,15 @@ The project's goal is to provides a placeholder for various sample VNF
 reference architecture and optimization methods related to VNF/Network service
 for high performance VNFs. This project provides benefits to other OPNFV
 projects like Functest, Models, yardstick etc to perform real life
-use-case based testing and VNF/NFVi characterization for the same.
+use-case based testing and VNF/ Network Function Virtualization Infrastructure
+(:term:`NFVI`) characterization for the same.
 
 The Project's scope to create a repository of sample VNFs to help VNF
-benchmarking and NFVi characterization with real world traffic and host a
+benchmarking and NFVI characterization with real world traffic and host a
 common development environment for developing the VNF using optimized libraries.
-Also, Develop a test framework in yardstick  to enable
-Virtual Network Function (:term:`VNF`) / Network Function Virtualization Infrastructure
-(:term:`NFVI`) verification.
+Also, develop a test framework in yardstick  to enable VNF/NFVI verification.
 
-*SampleVNF* is used in OPNFV for characterization of NFVi/VNF on OPNFV infrastructure
+*SampleVNF* is used in OPNFV for characterization of NFVI/VNF on OPNFV infrastructure
 and some of the OPNFV features.
 
 .. seealso:: Pharos_ for information on OPNFV community labs and this
diff --git a/docs/testing/user/userguide/02-methodology.rst b/docs/testing/user/userguide/02-methodology.rst
index 07e9e7ce..5550fec9 100644
--- a/docs/testing/user/userguide/02-methodology.rst
+++ b/docs/testing/user/userguide/02-methodology.rst
@@ -22,7 +22,7 @@ related to VNF/Network service for high performance VNFs.
 The sample VNFs are Open Source approximations* of Telco grade :term:`VNF`
 using optimized VNF + NFVi Infrastructure libraries, with Performance Characterization of Sample† Traffic Flows.
 • * Not a commercial product. Encourage the community to contribute and close the feature gaps.
-• † No Vendor/Proprietary Workloads 
+• † No Vendor/Proprietary Workloads
 
 ETSI-NFV
 ========
diff --git a/docs/testing/user/userguide/03-architecture.rst b/docs/testing/user/userguide/03-architecture.rst
index d8b81c60..3654c43a 100755
--- a/docs/testing/user/userguide/03-architecture.rst
+++ b/docs/testing/user/userguide/03-architecture.rst
@@ -30,8 +30,8 @@ of Sample† Traffic Flows.
  * Not a commercial product. Encourage the community to contribute and close the feature gaps.
  † No Vendor/Proprietary Workloads
 
-t helpsIt helps to facilitate deterministic & repeatable bench-marking on Industry
-standard high volume Servers. It augments well with a Test Infrastructure to
+It helps to facilitate deterministic & repeatable bench-marking on Industry
+standard high volume Servers. It augments well with a Test infrastructure to
 help facilitate consistent/repeatable methodologies for characterizing &
 validating the sample VNFs through OPEN SOURCE VNF approximations and test tools.
 The VNFs belongs to this project are never meant for field deployment.
@@ -40,7 +40,7 @@ All the VNF source code part of this project requires Apache License Version 2.0
 Supported deployment:
 ----------------------
 * Bare-Metal - All VNFs can run on a Bare-Metal DUT
-* Standalone Virtualization: All VNFs can run on SV like VPP as switch, ovs,
+* Standalone Virtualization(SV): All VNFs can run on SV like VPP as switch, ovs,
   ovs-dpdk, srioc
 * Openstack: Latest Openstack supported
 
@@ -75,7 +75,7 @@ VNF supported
       Packet pROcessing eXecution Engine (PROX) which is a DPDK application.
       PROX can do operations on packets in a highly configurable manner.
       The PROX application is also displaying performance statistics that can
-      be used for performance investigations. 
+      be used for performance investigations.
       Intel® DPPD - PROX is an application built on top of DPDK which allows
       creating software architectures, such as the one depicted below, through
       small and readable configuration files.
@@ -106,7 +106,7 @@ SampleVNF Directory structure
           user guides and SampleVNF descriptions.
 
 *tools/* - Currently contains tools to build image for VMs which are deployed
-           by Heat. Currently contains helper scripts like install, setup env 
+           by Heat. Currently contains helper scripts like install, setup env
 
 *VNFs/* - all VNF source code directory.
 
diff --git a/docs/testing/user/userguide/04-installation.rst b/docs/testing/user/userguide/04-installation.rst
index d7c26c9d..9a31ecdc 100644
--- a/docs/testing/user/userguide/04-installation.rst
+++ b/docs/testing/user/userguide/04-installation.rst
@@ -10,7 +10,7 @@ Abstract
 --------
 
 This project provides a placeholder for various sample VNF
-(Virtual Network Function (:term `VNF`)) development which includes example
+(Virtual Network Function (:term:`VNF`)) development which includes example
 reference architecture and optimization methods related to VNF/Network service
 for high performance VNFs.
 The sample VNFs are Open Source approximations* of Telco grade VNF’s using
@@ -20,21 +20,21 @@ of Sample† Traffic Flows.
 ::
 
   * Not a commercial product. Encourage the community to contribute and close the feature gaps.
-    † No Vendor/Proprietary Workloads 
+  † No Vendor/Proprietary Workloads
 
 SampleVNF supports installation directly in Ubuntu. The installation procedure
 are detailed in the sections below.
 
 The steps needed to run SampleVNF are:
   1) Install and Build SampleVNF.
-  2) deploy the VNF on the target and modify the config based on the Network under test
+  2) Deploy the VNF on the target and modify the config based on the Network under test
   3) Run the traffic generator to generate the traffic.
 
 Prerequisites
 -------------
 
-Supported Test setup:
---------------------
+Supported Test setup
+^^^^^^^^^^^^^^^^^^^^^
 The device under test (DUT) consists of a system following;
   * A single or dual processor and PCH chip, except for System on Chip (SoC) cases
   * DRAM memory size and frequency (normally single DIMM per channel)
@@ -45,18 +45,19 @@ Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TR
 simulation platform to generate packet traffic to the DUT ports and
 determine the throughput/latency at the tester side.
 
-Below are the supported/tested (:term `VNF`) deployment type.
+Below are the supported/tested (:term:`VNF`) deployment type.
 
 .. image:: images/deploy_type.png
    :width: 800px
    :alt: SampleVNF supported topology
 
 Hardware & Software Ingredients
--------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 SUT requirements:
-^^^^^^^^^^^^^^^^
+
 ::
+
    +-----------+------------------+
    | Item      | Description      |
    +-----------+------------------+
@@ -72,8 +73,9 @@ SUT requirements:
    +-----------+------------------+
 
 Boot and BIOS settings:
-^^^^^^^^^^^^^^^^^^^^^^
+
 ::
+
    +------------------+---------------------------------------------------+
    | Boot settings    | default_hugepagesz=1G hugepagesz=1G hugepages=16  |
    |                  | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33  |
@@ -97,49 +99,58 @@ The ethernet cables should be connected between traffic generator and the VNF se
 SRIOV or OVS) setup based on the test profile.
 
 The connectivity could be
-1) Single port pair : One pair ports used for traffic 
-   ::
+
+1) Single port pair : One pair ports used for traffic
+
+::
+
      e.g. Single port pair link0 and link1 of VNF are used
      TG:port 0 <------> VNF:Port 0
      TG:port 1 <------> VNF:Port 1
 
 2) Multi port pair :  More than one pair of traffic
-   ::
+
+::
+
      e.g. Two port pair link 0, link1, link2 and link3 of VNF are used
      TG:port 0 <------> VNF:Port 0
      TG:port 1 <------> VNF:Port 1
-     TG:port 2 <------> VNF:Port 2 
+     TG:port 2 <------> VNF:Port 2
      TG:port 3 <------> VNF:Port 3
 
      For correalted traffic, use below configuration
      TG_1:port 0 <------> VNF:Port 0
                         VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
      (TG_2(UDP_Replay) reflects all the traffic on the given port)
- * Bare-Metal
-   Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run 
 
- * Standalone Virtualization - PHY-VM-PHY
+* Bare-Metal
+   Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run
+
+* Standalone Virtualization - PHY-VM-PHY
    * SRIOV
      Refer below link to setup sriov
      https://software.intel.com/en-us/articles/using-sr-iov-to-share-an-ethernet-port-among-multiple-vms
 
-   * OVS_DPDK
+ * OVS_DPDK
      Refer below link to setup ovs-dpdk
      http://docs.openvswitch.org/en/latest/intro/install/general/
      http://docs.openvswitch.org/en/latest/intro/install/dpdk/
 
  * Openstack
      Use any OPNFV installer to deploy the openstack.
-    
+
 
 Build VNFs on the DUT:
 ----------------------
+
 1) Clone sampleVNF project repository  - git clone https://git.opnfv.org/samplevnf
 
-   Auto Build - Using script to build VNFs
-   ^^^^^^^^^^
-     * Interactive options: 
+Auto Build - Using script to build VNFs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+     * Interactive options:
+
        ::
+
          ./tools/vnf_build.sh -i
          Follow the steps in the screen from option [1] –> [9] and
          select option [8] to build the vnfs.
@@ -169,33 +180,37 @@ Build VNFs on the DUT:
 
          [9] Exit Script
      * non-Interactive options:
+
        ::
+
          ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
 
-   Manual Build
-   ^^^^^^^^^^^^
+Manual Build
+^^^^^^^^^^^^
+
    ::
-      1.Download DPDK supported version from dpdk.org
+
+      1. Download DPDK supported version from dpdk.org
         http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
         unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
         cd dpdk
         make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
         cd x86_64-native-linuxapp-gcc
         make -j
-      2.Setup huge pages
+      2. Setup huge pages
         For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
         explicitly and can also be optionally set as the default hugepage size
         for the system. For example, to reserve 8G of hugepage memory in the form
         of eight 1G pages, the following options should be passed to the
         kernel: * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
-      3.Add this to Go to /etc/default/grub configuration file.
+      3. Add this to Go to /etc/default/grub configuration file.
         Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”to the GRUB_CMDLINE_LINUX entry.
-      4.Setup Environment Variable
+      4. Setup Environment Variable
         export RTE_SDK=<samplevnf>/dpdk
         export RTE_TARGET=x86_64-native-linuxapp-gcc
         export VNF_CORE=<samplevnf>
         or using ./tools/setenv.sh
-      5.Build vACL VNFs
+      5. Build vACL VNFs
         cd <samplevnf>/VNFs/vACL
         make clean
         make
@@ -205,7 +220,9 @@ Build VNFs on the DUT:
 2) Standalone virtualization/Openstack:
 
    Build VM image from script in  yardstick
+
    ::
+
      1) git clone https://git.opnfv.org/yardstick
      2) cd yardstick and run
         ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
diff --git a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
index b5880645..29c76e69 100644
--- a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
+++ b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
@@ -9,8 +9,8 @@ SampleVNF - How to run
 Prerequisites
 -------------
 
-Supported Test setup:
---------------------
+Supported Test setup
+^^^^^^^^^^^^^^^^^^^^
 The device under test (DUT) consists of a system following;
   * A single or dual processor and PCH chip, except for System on Chip (SoC) cases
   * DRAM memory size and frequency (normally single DIMM per channel)
@@ -21,18 +21,18 @@ Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TR
 simulation platform to generate packet traffic to the DUT ports and
 determine the throughput/latency at the tester side.
 
-Below are the supported/tested (:term `VNF`) deployment type.
+Below are the supported/tested (:term:`VNF`) deployment type.
 
 .. image:: images/deploy_type.png
    :width: 800px
    :alt: SampleVNF supported topology
 
 Hardware & Software Ingredients
--------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 SUT requirements:
-^^^^^^^^^^^^^^^^
-::
+
+
    +-----------+------------------+
    | Item      | Description      |
    +-----------+------------------+
@@ -48,8 +48,8 @@ SUT requirements:
    +-----------+------------------+
 
 Boot and BIOS settings:
-^^^^^^^^^^^^^^^^^^^^^^
-::
+
+
    +------------------+---------------------------------------------------+
    | Boot settings    | default_hugepagesz=1G hugepagesz=1G hugepages=16  |
    |                  | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33  |
@@ -73,7 +73,8 @@ The ethernet cables should be connected between traffic generator and the VNF se
 SRIOV or OVS) setup based on the test profile.
 
 The connectivity could be
-1) Single port pair : One pair ports used for traffic 
+
+1) Single port pair : One pair ports used for traffic
    ::
      e.g. Single port pair link0 and link1 of VNF are used
      TG:port 0 <------> VNF:Port 0
@@ -84,7 +85,7 @@ The connectivity could be
      e.g. Two port pair link 0, link1, link2 and link3 of VNF are used
      TG:port 0 <------> VNF:Port 0
      TG:port 1 <------> VNF:Port 1
-     TG:port 2 <------> VNF:Port 2 
+     TG:port 2 <------> VNF:Port 2
      TG:port 3 <------> VNF:Port 3
 
      For correalted traffic, use below configuration
@@ -92,7 +93,7 @@ The connectivity could be
                         VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
      (TG_2(UDP_Replay) reflects all the traffic on the given port)
  * Bare-Metal
-   Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run 
+   Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run
 
  * Standalone Virtualization - PHY-VM-PHY
    * SRIOV
@@ -111,12 +112,12 @@ Setup Traffic generator
 -----------------------
 
 Step 0: Preparing hardware connection
-  ::
+
     Connect Traffic generator and VNF system back to back as shown in previous section
     TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1
 
 Step 1: Setting up Traffic generator (TRex)
-  ::
+
     TRex Software preparations
     ^^^^^^^^^^^^^^^^^^^^^^^^^^
     * Install the OS (Bare metal Linux, not VM!)
@@ -131,13 +132,19 @@ Step 1: Setting up Traffic generator (TRex)
 
 Build SampleVNFs
 -----------------
+
 Step 2: Procedure to build SampleVNFs
-  ::
+
    a) Clone sampleVNF project repository  - git clone https://git.opnfv.org/samplevnf
    b) Build VNFs
-      Auto Build
-      ^^^^^^^^^^
-          * Interactive options:
+
+Auto Build
+^^^^^^^^^^
+
+* Interactive options:
+
+::
+
               ./tools/vnf_build.sh -i
               Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs.
               It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs.
@@ -156,18 +163,27 @@ Step 2: Procedure to build SampleVNFs
               [5] Download DPDK zip
               [6] Build and Install DPDK
               [7] Setup hugepages
+              [8] Download civetweb
 
               ----------------------------------------------------------
               Step 3: Build VNFs
               ----------------------------------------------------------
-              [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
+              [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
+
+              [10] Exit Script
+
+
+* Non-Interactive options:
+
+::
 
-              [9] Exit Script
-          * non-Interactive options:
               ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
 
-      Manual Build
-      ^^^^^^^^^^^^
+Manual Build
+^^^^^^^^^^^^
+
+::
+
            1) Download DPDK supported version from dpdk.org
               http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
               unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
@@ -175,22 +191,30 @@ Step 2: Procedure to build SampleVNFs
               make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
               cd x86_64-native-linuxapp-gcc
               make
-           2) Setup huge pages
+
+           2) Download civetweb 1.9 version from the following link
+              https://sourceforge.net/projects/civetweb/files/1.9/CivetWeb_V1.9.zip
+              unzip CivetWeb_V1.9.zip
+              mv civetweb-master civetweb
+              cd civetweb
+              make lib
+
+           3) Setup huge pages
               For 1G/2M hugepage sizes, for example 1G pages, the size must be
               specified explicitly and can also be optionally set as the
               default hugepage size for the system. For example, to reserve 8G
               of hugepage memory in the form of eight 1G pages, the following
               options should be passed to the kernel: * default_hugepagesz=1G
               hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
-           3) Add this to Go to /etc/default/grub configuration file.
+           4) Add this to Go to /etc/default/grub configuration file.
               Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”
               to the GRUB_CMDLINE_LINUX entry.
-           4) Setup Environment Variable
+           5) Setup Environment Variable
               export RTE_SDK=<samplevnf>/dpdk
               export RTE_TARGET=x86_64-native-linuxapp-gcc
               export VNF_CORE=<samplevnf>
               or using ./tools/setenv.sh
-           5) Build VNFs
+           6) Build VNFs
               cd <samplevnf>
               make
               or to build individual VNFs
@@ -200,18 +224,27 @@ Step 2: Procedure to build SampleVNFs
                 The vFW executable will be created at the following location
                 <samplevnf>/VNFs/vFW/build/vFW
 
+
 Virtual Firewall - How to run
 -----------------------------
 
 Step 3: Bind the datapath ports to DPDK
+
+a) Bind ports to DPDK
+
   ::
-    a) Bind ports to DPDK
+
         For DPDK versions 17.xx
         1) cd <samplevnf>/dpdk
         2) ./usertools/dpdk-devbind.py --status <--- List the network device
         3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules 
-    b) Prepare script to enalble VNF to route the packets
+        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+
+
+b) Prepare script to enalble VNF to route the packets
+
+  ::
+
           cd <samplevnf>/VNFs/vFW/config
           Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting.
 
@@ -245,12 +278,20 @@ Step 3: Bind the datapath ports to DPDK
            p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
            p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
            p vfw applyruleset
-     c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+
+
+c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+
+  ::
+
           cd <samplevnf>/VNFs/vFW/
           ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg  -s ./config/VFW_SWLB_SinglePortPair_script.tc
 
+
 step 4: Run Test using traffic geneator
+
   ::
+
     On traffic generator system:
     cd <trex eg v2.28/stl>
     Update the bench.py to generate the traffic.
@@ -268,18 +309,27 @@ step 4: Run Test using traffic geneator
     start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
     For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
 
+
 Virtual Access Control list - How to run
 ----------------------------------------
 
 Step 3: Bind the datapath ports to DPDK
+
+a) Bind ports to DPDK
+
   ::
-    a) Bind ports to DPDK
+
         For DPDK versions 17.xx
         1) cd <samplevnf>/dpdk
         2) ./usertools/dpdk-devbind.py --status <--- List the network device
         3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
         .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-    b) Prepare script to enalble VNF to route the packets
+
+
+b) Prepare script to enalble VNF to route the packets
+
+  ::
+
           cd <samplevnf>/VNFs/vACL/config
           Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
 
@@ -313,80 +363,20 @@ Step 3: Bind the datapath ports to DPDK
            p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
            p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
            p acl applyruleset
-     c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
-        cd <samplevnf>/VNFs/vFW/
-        ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/IPv4_swlb_acl.tc.
 
-step 4: Run Test using traffic geneator
-  ::
-    On traffic generator system:
-    cd <trex eg v2.28/stl>
-    Update the bench.py to generate the traffic.
 
-    class STLBench(object):
-    ip_range = {}
-    ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'}
-    ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<traffic generator port 1 IP eg 172.16.40.20>'}
-    cd <trex eg v2.28>
-    Run the TRex server: sudo ./t-rex-64 -i -c 7
-    In another shell run TRex console: trex-console
-    The console can be run from another computer with -s argument, --help for more info.
-    Other options for TRex client are automation or GUI
-    In the console, run "tui" command, and then send the traffic with commands like:
-    start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
-    For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
+c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
 
-Virtual Access Control list - How to run
-----------------------------------------
-
-Step 3: Bind the datapath ports to DPDK
   ::
-    a) Bind ports to DPDK
-        For DPDK versions 17.xx
-        1) cd <samplevnf>/dpdk
-        2) ./usertools/dpdk-devbind.py --status <--- List the network device
-        3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules 
-    b) Prepare script to enalble VNF to route the packets
-          cd <samplevnf>/VNFs/vACL/config
-          Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
-
-           link 0 config <VNF port 0 IP eg 202.16.100.10> 8
-           link 0 up
-           link 1 down
-           link 1 config <VNF port 0 IP eg 172.16.40.10> 8
-           link 1 up
 
-           ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
-           routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
-           routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+        cd <samplevnf>/VNFs/vFW/
+        ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/IPv4_swlb_acl.tc.
 
-           ; IPv4 static ARP; disable if dynamic arp is enabled.
-           p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
-           p 1 arpadd 1  <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
-           p action add 0 accept
-           p action add 0 fwd 0
-           p action add 0 count
-           p action add 1 accept
-           p action add 1 fwd 1
-           p action add 1 count
-           p action add 2 drop
-           p action add 2 count
-           p action add 0 conntrack
-           p action add 1 conntrack
-           p action add 2 conntrack
-           p action add 3 conntrack
-           ; IPv4 rules
-           p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
-           p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
-           p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
-           p acl applyruleset
-     c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
-        cd <samplevnf>/VNFs/vACL/
-        ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/IPv4_swlb_acl.tc.
 
 step 4: Run Test using traffic geneator
+
   ::
+
     On traffic generator system:
     cd <trex eg v2.28/stl>
     Update the bench.py to generate the traffic.
@@ -404,18 +394,27 @@ step 4: Run Test using traffic geneator
     start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
     For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
 
+
 vCGNAPT - How to run
-----------------------------------------
+--------------------
 
 Step 3: Bind the datapath ports to DPDK
+
+ a) Bind ports to DPDK
+
   ::
-    a) Bind ports to DPDK
+
         For DPDK versions 17.xx
         1) cd <samplevnf>/dpdk
         2) ./usertools/dpdk-devbind.py --status <--- List the network device
         3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules 
-    b) Prepare script to enalble VNF to route the packets
+        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+
+
+ b) Prepare script to enalble VNF to route the packets
+
+  ::
+
           cd <samplevnf>/VNFs/vCGNAPT/config
           Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting.
 
@@ -436,17 +435,24 @@ Step 3: Bind the datapath ports to DPDK
            ; IPv4 static ARP; disable if dynamic arp is enabled.
            p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
            p 1 arpadd 1  <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
-     For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
+       For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
           (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay)
 
-     c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+
+ c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+
+  ::
+
         cd <samplevnf>/VNFs/vCGNAPT/
         ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg  -s ./config/sample_swlb_2port_2WT.tc
 
 
 step 4: Run Test using traffic geneator
-  ::
+
         On traffic generator system:
+
+ ::
+
         cd <trex eg v2.28/stl>
         Update the bench.py to generate the traffic.
 
@@ -463,24 +469,35 @@ step 4: Run Test using traffic geneator
         start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
         For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
 
+
 UDP_Replay - How to run
 ----------------------------------------
 
 Step 3: Bind the datapath ports to DPDK
+
+ a) Bind ports to DPDK
+
   ::
-    a) Bind ports to DPDK
+
         For DPDK versions 17.xx
         1) cd <samplevnf>/dpdk
         2) ./usertools/dpdk-devbind.py --status <--- List the network device
         3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules 
-    b) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+        .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+
+ b) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
+
+  ::
+
           cd <samplevnf>/VNFs/UDP_Replay/
           cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
           e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
 
+
 step 4: Run Test using traffic geneator
-  ::
+
+ ::
+
     On traffic generator system:
     cd <trex eg v2.28/stl>
     Update the bench.py to generate the traffic.
@@ -503,6 +520,7 @@ PROX - How to run
 
 Description
 ^^^^^^^^^^^
+
 This is PROX, the Packet pROcessing eXecution engine, part of Intel(R)
 Data Plane Performance Demonstrators, and formerly known as DPPD-BNG.
 PROX is a DPDK-based application implementing Telco use-cases such as
@@ -511,6 +529,7 @@ finer grained network functions like QoS, Routing, load-balancing...
 
 Compiling and running this application
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 This application supports DPDK 16.04, 16.11, 17.02 and 17.05.
 The following commands assume that the following variables have been set:
 
@@ -519,6 +538,7 @@ export RTE_TARGET=x86_64-native-linuxapp-gcc
 
 Example: DPDK 17.05 installation
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 * git clone http://dpdk.org/git/dpdk
 * cd dpdk
 * git checkout v17.05
@@ -526,12 +546,14 @@ Example: DPDK 17.05 installation
 
 PROX compilation
 ^^^^^^^^^^^^^^^^
+
 The Makefile with this application expects RTE_SDK to point to the
 root directory of DPDK (e.g. export RTE_SDK=/root/dpdk). If RTE_TARGET
 has not been set, x86_64-native-linuxapp-gcc will be assumed.
 
 Running PROX
 ^^^^^^^^^^^^
+
 After DPDK has been set up, run make from the directory where you have
 extracted this application. A build directory will be created
 containing the PROX executable. The usage of the application is shown
@@ -540,6 +562,7 @@ been bound to the DPDK provided igb_uio driver. Refer to the "Getting
 Started Guide - DPDK" document for more details.
 
 ::
+
   Usage: ./build/prox [-f CONFIG_FILE] [-l LOG_FILE] [-p] [-o DISPLAY] [-v] [-a|-e] [-m|-s|-i] [-n] [-w DEF] [-q] [-k] [-d] [-z] [-r VAL] [-u] [-t]
         -f CONFIG_FILE : configuration file to load, ./prox.cfg by default
         -l LOG_FILE : log file name, ./prox.log by default
diff --git a/docs/testing/user/userguide/06-How_to_use_REST_api.rst b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
new file mode 100644
index 00000000..c2c8836e
--- /dev/null
+++ b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
@@ -0,0 +1,280 @@
+.. This work is licensed under a creative commons attribution 4.0 international
+.. license.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) opnfv, national center of scientific research "demokritos" and others.
+
+========================================================
+REST API - Readme
+========================================================
+
+Introduction
+===============
+As the internet industry progresses creating REST API becomes more concrete
+with emerging best Practices. RESTful web services don’t follow a prescribed
+standard except fpr the protocol that is used which is HTTP, its important
+to build RESTful API in accordance with industry best practices to ease
+development & increase client adoption.
+
+In REST Architecture everything is a resource. RESTful web services are light
+weight, highly scalable and maintainable and are very commonly used to
+create APIs for web-based applications.
+
+Here are important points to be considered:
+
+ * GET operations are read only and are safe.
+ * PUT and DELETE operations are idempotent means their result will
+   always same no matter how many times these operations are invoked.
+ * PUT and POST operation are nearly same with the difference lying
+   only in the result where PUT operation is idempotent and POST
+    operation can cause different result.
+
+
+REST API in SampleVNF
+=====================
+
+In SampleVNF project VNF’s are run under different contexts like BareMetal,
+SRIOV, OVS & Openstack etc. It becomes difficult to interact with the
+VNF’s using the command line interface provided by the VNF’s currently.
+
+Hence there is a need to provide a web interface to the VNF’s running in
+different environments through the REST api’s. REST can be used to modify
+or view resources on the server without performing any server-side
+operations.
+
+REST api on VNF’s will help adapting with the new automation techniques
+being adapted in yardstick.
+
+Web server integration with VNF’s
+==================================
+
+In order to implement REST api’s in VNF one of the first task is to
+identify a simple web server that needs to be integrated with VNF’s.
+For this purpose “civetweb” is identified as the web server That will
+be integrated with the VNF application.
+
+CivetWeb is an easy to use, powerful, C/C++ embeddable web server with
+optional CGI, SSL and Lua support. CivetWeb can be used by developers
+as a library, to add web server functionality to an existing application.
+
+Civetweb is a project forked out of Mongoose. CivetWeb uses an [MITlicense].
+It can also be used by end users as a stand-alone web server. It is available
+as single executable, no installation is required.
+
+In our project we will be integrating civetweb into each of our VNF’s.
+Civetweb exposes a few functions which are used to resgister custom handlers
+for different URI’s that are implemented.
+Typical usage is shown below
+
+
+VNF Application init()
+=========================
+
+Initialize the civetweb library
+================================
+
+mg_init_library(0);
+
+Start the web server
+=====================
+ctx = mg_start(NULL, 0, options);
+
+
+Once the civetweb server is started we can register our URI’s as show below
+mg_set_request_handler(ctx, "/config", static_cfg_handler, 0);
+
+In the above example “/config” is the URI & static_cfg_handler() is
+the handler that gets called when a user invokes this URI through
+the HTTP client. API's have been mostly implemented for existing VNF's
+like vCGNAPT, vFW & vACL. you might want to implement custom handlers
+for your VNF.
+
+URI definition for different VNF’s
+===================================
+
+::
+
+URI	   				REST Method	     Arguments			Description
+===========================================================================================================================
+/vnf          				GET  		       	None           		Displays top level methods available
+
+/vnf/config   				GET         		None           		Displays the current config set
+					POST        		pci_white_list: 	Command success/failure
+								num_worker(o):
+								vnf_type(o):
+								pkt_type (o):
+								num_lb(o):
+								sw_lb(o):
+								sock_in(o):
+								hyperthread(o) :
+
+/vnf/config/arp				GET			None			Displays ARP/ND info
+					POST			action: <add/del/req>	Command success/failure
+								ipv4/ipv6: <address>
+								portid: <>
+								macaddr: <> for add
+
+/vnf/config/link			GET			None
+					POST			link_id:<>		Command success/failure
+								state: <1/0>
+
+/vnf/config/link/<link id>		GET			None
+					POST						Command success/failure
+								ipv4/ipv6: <address>
+								depth: <>
+
+/vnf/config/route			GET			None			Displays gateway route entries
+					POST			portid: <>		Adds route entries for default gateway
+								nhipv4/nhipv6: <addr>
+								depth: <>
+								type:"net/host"
+
+/vnf/config/rules(vFW/vACL only)	GET			None			Displays the methods /load/clear
+/vnf/config/rules/load			GET			None			Displays if file was loaded
+					PUT			<script file
+								with cmds>		Executes each command from script file
+/vnf/config/rules/clear			GET			None			Command success/failure clear the stat
+
+/vnf/config/nat(vCGNAPT only)		GET			None			Displays the methods /load/clear
+/vnf/config/nat/load			GET			None			Displays if file was loaded
+					PUT			<script file
+								with commands>		Executes each command from script file
+
+/vnf/config/nat/clear			GET			None			Command success/failure clear the stats
+/vnf/log				GET			None			This needs to be implemented for each VNF
+											just keeping this as placeholder.
+
+/vnf/dbg				GET			None			Will display methods supported like /pipelines/cmd
+/vnf/dbg/pipelines			GET			None			Displays pipeline information(names)
+											of each pipelines
+/vnf/dbg/pipelines/<pipe id>		GET			None			Displays debug level for particular pipeline
+
+/vnf/dbg/cmd				GET			None			Last executed command parameters
+					POST			cmd:			Command success/failure
+								dbg:
+								d1:
+								d2:
+
+API Usage
+===============
+
+1. Initialization
+================
+
+In order to integrate to your VNF these are the steps required
+
+In your VNF application init
+
+
+#ifdef REST_API_SUPPORT
+        Initialize the rest api
+        struct mg_context *ctx = rest_api_init(&app);
+#endif
+
+
+#ifdef REST_API_SUPPORT
+        rest api's for cgnapt
+        rest_api_<vnf>_init(ctx, &app);
+#endif
+
+
+void rest_api_<vnf>_init(struct mg_context *ctx, struct app_params *app)
+{
+        myapp = app;
+
+	VNF specific command registration
+        mg_set_request_handler(,,,);
+
+}
+
+
+2. Run time Usage
+====================
+
+An application(say vFW) with REST API support is run as follows
+with just PORT MASK as input. The following environment variables
+need to be set before launching the application(To be run from
+samplevnf directory).
+
+export VNF_CORE=`pwd`
+export RTE_SDK=`pwd`/dpdk-16.04
+export RTE_TARGET=x86_64-native-linuxapp-gcc
+
+./build/vFW -p 0x3 (Without the -f & -s option)
+
+1. When VNF(vCGNAPT/vACL/vFW) is launched it waits for user to provide the
+/vnf/config REST method. A typical curl command if used will look like below
+shown. This with minimal parameter. For more options please refer to above REST
+methods table.
+
+e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:08:00.0
+ 0000:08:00.1"}' http://<IP>/vnf/config
+
+Note: the config is mostly implemented based on existing VNF's. if new parameters
+are required in the config we need to add that as part of the vnf_template.
+
+Once the config is provided the application gets launched.
+
+Note for CGNAPT we can add public_ip_port_range as follows, the following e.g gives
+a multiport configuration with 4 ports, 2 load balancers, worker threads 10, multiple
+public_ip_port_range being added, please note the "/" being used to seperate multiple
+inputs for public_ip_port_range.
+
+e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:05:00.0 0000:05:00.2 0000:07:00.0 0000:07:00.2",
+		 "num_lb":"2", "num_worker":"10","public_ip_port_range_0": "04040000:(1, 65535)/04040001:(1, 65535)",
+		 "public_ip_port_range_1": "05050000:(1, 65535)/05050001:(1, 65535)" }' http://10.223.197.179/vnf/config
+
+2. Check the Link IP's using the REST API
+e.g curl <IP>/vnf/config/link
+
+This would indicate the number of links enabled. You should enable all the links
+by using following curl command for links 0 & 1
+
+e.g curl -X POST -H "Content-Type:application/json" -d '{"linkid": "0", "state": "1"}'
+http://<IP>/vnf/config/link
+curl -X POST -H "Content-Type:application/json" -d '{"linkid": "1", "state": "1"}'
+http://<IP>/vnf/config/link
+
+3. Now that links are enabled we can configure IP's using link method as follows
+
+e.g  curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"<IP to be configured>","depth":"24"}'
+http://<IP>/vnf/config/link/0
+curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"IP to be configured","depth":"24"}'
+http://<IP>/vnf/config/link/1
+
+Once the IP's are set in place time to add NHIP for ARP Table. This is done using for all the ports
+required.
+/vnf/config/route
+
+curl -X POST -H "Content-Type:application/json" -d '{"portid":"0", "nhipv4":"IPV4 address",
+ "depth":"8", "type":"net"}' http://<IP>/vnf/config/route
+
+
+4. For Firewall/ACL in order to load the rules a script file needs to be posted
+using a script.
+/vnf/config/rules/load
+
+Typical example for loading a script file is shown below
+curl -X PUT -F 'image=@<path to file>' http://<IP>/vnf/config/rules/load
+
+vCGNAPT can use the following REST api's for runtime configuring through a script
+/vnf/config/rules/clear
+/vnf/config/nat(vCGNAPT only)
+/vnf/config/nat/load
+
+For debug purpose following REST API's could be used as described above.
+
+/vnf/dbg
+/vnf/dbg/pipelines
+/vnf/dbg/pipelines/<pipe id>
+/vnf/dbg/cmd
+
+5. For stats we can use the following method
+
+/vnf/stats
+e.g curl <IP>/vnf/stats
+
+6. For quittiong the application
+/vnf/quit
+
+e.g curl <IP>/vnf/quit
+
diff --git a/docs/testing/user/userguide/07-Config_files.rst b/docs/testing/user/userguide/07-Config_files.rst
new file mode 100644
index 00000000..6ad6c6fb
--- /dev/null
+++ b/docs/testing/user/userguide/07-Config_files.rst
@@ -0,0 +1,360 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) OPNFV, Intel Corporation and others.
+
+SampleVNF - Config files
+========================
+
+The configuration files are created based on the DUT test scenarios.
+The example reference files are provided as part of the VNFs in the 
+config folder.
+
+Following parameters will define the config files.
+
+1. Loadbalancing: Hardware or Software
+2. Traffic type: IPv4 or IPv6
+3. Number of Ports: pairs: Single port or Multi-Port 
+
+Following are the example configuration files for sampleVNFs.
+
+vCGNAPT Config files
+--------------------
+
+
+
+
+vFW Config files
+----------------
+
+The reference configuration files explained here are for Software and Hardware
+loadbalancing with IPv4 traffic type and single port pair.
+For other configurations liek IPv6 and Multi-port, refer to example config
+files provided as part of the source code in config(VNFs/vFW/config) folder
+of the VNFs. 
+
+1. SWLB, IPv4, Single Port Pair, 4WT:
+
+  ::
+
+    [PIPELINE0]
+    type = MASTER
+    core = 0
+    
+    [PIPELINE1]
+    type =  ARPICMP
+    core = 0
+    
+    pktq_in  = SWQ2
+    pktq_out = TXQ0.0 TXQ1.0
+    
+    ; IPv4 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x
+    ; arp_route_tbl = (ac102814,ff000000,1,ac102814) (ca106414,ff000000,0,ca106414)
+    
+    ; IPv6 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x
+    ;nd_route_tbl =  (fec0::6a05:caff:fe30:21b0,64,0,fec0::6a05:caff:fe30:21b0)
+    ;nd_route_tbl =  (2012::6a05:caff:fe30:2081,64,1,2012::6a05:caff:fe30:2081)
+    
+    ; egress (private interface) info
+    pktq_in_prv =  RXQ0.0
+    
+    ;for pub port <-> prv port mapping (prv, pub)
+    prv_to_pub_map = (0,1)
+    prv_que_handler = (0)
+    
+    [PIPELINE2]
+    type = TXRX
+    core = 1
+    pktq_in  = RXQ0.0 RXQ1.0
+    pktq_out = SWQ0 SWQ1 SWQ2
+    pipeline_txrx_type = RXRX
+    
+    [PIPELINE3]
+    type = LOADB
+    core = 2
+    pktq_in  = SWQ0 SWQ1
+    pktq_out = SWQ3 SWQ4 SWQ5 SWQ6 SWQ7 SWQ8 SWQ9 SWQ10
+    outport_offset = 136
+    n_vnf_threads = 4 ; Number of worker threads
+    prv_que_handler = (0)
+    n_lb_tuples = 5 ; tuple(src_ip,dst_ip, src_port, dst_port, protocol)
+    ;loadb_debug = 0
+    
+    [PIPELINE4]
+    type = VFW
+    core = 3
+    pktq_in  = SWQ3 SWQ4
+    pktq_out = SWQ11 SWQ12;TXQ0.0 TXQ1.0
+    
+    n_rules = 4096 ; Max number of ACL rules
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576 ; Max number of connections/flows per vFW WT
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10	; TCP Connection WAIT timeout
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180 ; UDP timeouts for unreplied traffic
+    udp_replied = 180 ; UDP timeout for replied traffic
+    
+    [PIPELINE5]
+    type = VFW
+    core = 4
+    pktq_in  = SWQ5 SWQ6
+    pktq_out = SWQ13 SWQ14;TXQ0.0 TXQ1.0
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE6]
+    type = VFW
+    core = 5
+    pktq_in  = SWQ7 SWQ8
+    pktq_out = SWQ15 SWQ16
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE7]
+    type = VFW
+    core = 6
+    pktq_in  = SWQ9 SWQ10
+    pktq_out = SWQ17 SWQ18
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    traffic_type = 4 ; IPv4 Traffic 
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE8]
+    type = TXRX
+    core = 1h
+    pktq_in  = SWQ11 SWQ12 SWQ13 SWQ14 SWQ15 SWQ16 SWQ17 SWQ18
+    pktq_out = TXQ0.1 TXQ1.1 TXQ0.2 TXQ1.2 TXQ0.3 TXQ1.3 TXQ0.4 TXQ1.4
+    pipeline_txrx_type = TXTX
+
+
+2. HWLB, IPv4, Single Port Pair, 4 WT:
+
+This configuration doesn't require LOADB and TXRX pipelines
+
+  ::
+
+    [PIPELINE0]
+    type = MASTER
+    core = 0
+    
+    [PIPELINE1]
+    type =  ARPICMP
+    core = 0
+    pktq_in  = SWQ0 SWQ1 SWQ2 SWQ3
+    pktq_out = TXQ0.0 TXQ1.0
+    
+    ; egress (private interface) info
+    pktq_in_prv =  RXQ0.0
+    
+    ;for pub port <-> prv port mapping (prv, pub)
+    prv_to_pub_map = (0,1)
+    prv_que_handler = (0)
+    
+    [PIPELINE2]
+    type = VFW
+    core = 1
+    pktq_in  = RXQ0.0 RXQ1.0
+    pktq_out = TXQ0.1 TXQ1.1 SWQ0
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE3]
+    type = VFW
+    core = 2
+    pktq_in  = RXQ0.1 RXQ1.1
+    pktq_out = TXQ0.2 TXQ1.2 SWQ1
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE4]
+    type = VFW
+    core = 3
+    pktq_in  = RXQ0.2 RXQ1.2
+    pktq_out = TXQ0.3 TXQ1.3 SWQ2
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+    
+    [PIPELINE5]
+    type = VFW
+    core = 4
+    pktq_in  = RXQ0.3 RXQ1.3
+    pktq_out = TXQ0.4 TXQ1.4 SWQ3
+    
+    n_rules = 4096
+    ;n_flows gets round up to power of 2
+    n_flows = 1048576
+    
+    traffic_type = 4 ; IPv4 Traffic
+    ;traffic_type = 6 ; IPv6 Traffic
+    ; tcp_time_wait controls timeout for closed connection, normally 120
+    tcp_time_wait = 10
+    tcp_be_liberal = 0
+    ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
+    udp_unreplied = 180
+    udp_replied = 180
+
+
+vACL Config files
+----------------
+
+The reference configuration files explained here are for Software and Hardware
+loadbalancing with IPv4 traffic type and single port pair.
+For other configurations liek IPv6 and Multi-port, refer to example config
+files provided as part of the source code in config(VNFs/vACL/config) folder
+of the VNFs. 
+
+1. SWLB, IPv4, Single Port Pair, 1 WT:
+
+ ::
+
+    [EAL]
+    # add pci whitelist eg below
+    w = 05:00.0  ; Network Ports binded to dpdk
+    w = 05:00.1  ; Network Ports binded to dpdk
+    
+    [PIPELINE0]
+    type = MASTER
+    core = 0
+
+    [PIPELINE1]
+    type = ARPICMP
+    core = 0
+    pktq_in  = SWQ2
+    pktq_out = SWQ7
+    pktq_in_prv =  RXQ0.0
+    prv_to_pub_map = (0,1)
+    prv_que_handler = (0)
+    
+    [PIPELINE2]
+    type = TXRX
+    core = 1
+    pktq_in  = RXQ0.0 RXQ1.0
+    pktq_out = SWQ0 SWQ1 SWQ2
+    pipeline_txrx_type = RXRX
+    dest_if_offset = 176
+
+    [PIPELINE3]
+    type = LOADB
+    core = 2
+    pktq_in  = SWQ0 SWQ1
+    pktq_out = SWQ3 SWQ4
+    outport_offset = 136
+    phyport_offset = 204
+    n_vnf_threads = 1
+    prv_que_handler = (0)
+
+    [PIPELINE4]
+    type = ACL
+    core = 3
+    pktq_in  = SWQ3 SWQ4
+    pktq_out = SWQ5 SWQ6
+    n_flows = 1000000
+    pkt_type = ipv4
+    traffic_type = 4
+
+    [PIPELINE5]
+    type = TXRX
+    core = 1h
+    pktq_in  = SWQ5 SWQ6 SWQ7
+    pktq_out = TXQ0.0 TXQ1.0
+    pipeline_txrx_type = TXTX
+
+
+2. SWLB, IPv4, Single Port Pair, 1 WT:
+
+ ::    
+
+    [EAL]
+    # add pci whitelist eg below
+    w = 05:00.0
+    w = 05:00.1
+    
+    [PIPELINE0]
+    type = MASTER
+    core = 0
+
+    [PIPELINE1]
+    type = ARPICMP
+    core = 0
+    pktq_in  = SWQ0
+    pktq_out = TXQ0.0 TXQ1.0
+    pktq_in_prv =  RXQ0.0
+    prv_to_pub_map = (0,1)
+    prv_que_handler = (0)
+
+    [PIPELINE2]
+    type = ACL
+    core = 1
+    pktq_in  = RXQ0.0 RXQ1.0
+    pktq_out = TXQ0.1 TXQ1.1 SWQ0
+    n_flows = 1000000
+    pkt_type = ipv4
+    traffic_type = 4
+
+
+
diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst
index 2099025f..71f3a0e7 100644
--- a/docs/testing/user/userguide/index.rst
+++ b/docs/testing/user/userguide/index.rst
@@ -17,5 +17,7 @@ SampleVNF User Guide
    03-architecture
    04-installation
    05-How_to_run_SampleVNFs
+   06-How_to_use_REST_api
+   07-Config_files
    glossary
    references