diff options
author | 2017-10-04 09:36:42 +0000 | |
---|---|---|
committer | 2017-10-04 09:36:42 +0000 | |
commit | 58c7eb1100e51176c20e5d57250cb46ed7020fa3 (patch) | |
tree | 1a0c99e2673aded7e3ab26e7f0909cbe10fdbb92 /docs/testing/user/userguide/07-Config_files.rst | |
parent | 473537a387353bd221ddf6ff5c22f10eb7c8cef8 (diff) | |
parent | 2dd65cf55254d47873b114fec466e67b4130d3ec (diff) |
Merge "Docs: Review and update the docs for E-release"
Diffstat (limited to 'docs/testing/user/userguide/07-Config_files.rst')
-rw-r--r-- | docs/testing/user/userguide/07-Config_files.rst | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/docs/testing/user/userguide/07-Config_files.rst b/docs/testing/user/userguide/07-Config_files.rst new file mode 100644 index 00000000..6ad6c6fb --- /dev/null +++ b/docs/testing/user/userguide/07-Config_files.rst @@ -0,0 +1,360 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +SampleVNF - Config files +======================== + +The configuration files are created based on the DUT test scenarios. +The example reference files are provided as part of the VNFs in the +config folder. + +Following parameters will define the config files. + +1. Loadbalancing: Hardware or Software +2. Traffic type: IPv4 or IPv6 +3. Number of Ports: pairs: Single port or Multi-Port + +Following are the example configuration files for sampleVNFs. + +vCGNAPT Config files +-------------------- + + + + +vFW Config files +---------------- + +The reference configuration files explained here are for Software and Hardware +loadbalancing with IPv4 traffic type and single port pair. +For other configurations liek IPv6 and Multi-port, refer to example config +files provided as part of the source code in config(VNFs/vFW/config) folder +of the VNFs. + +1. SWLB, IPv4, Single Port Pair, 4WT: + + :: + + [PIPELINE0] + type = MASTER + core = 0 + + [PIPELINE1] + type = ARPICMP + core = 0 + + pktq_in = SWQ2 + pktq_out = TXQ0.0 TXQ1.0 + + ; IPv4 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x + ; arp_route_tbl = (ac102814,ff000000,1,ac102814) (ca106414,ff000000,0,ca106414) + + ; IPv6 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x + ;nd_route_tbl = (fec0::6a05:caff:fe30:21b0,64,0,fec0::6a05:caff:fe30:21b0) + ;nd_route_tbl = (2012::6a05:caff:fe30:2081,64,1,2012::6a05:caff:fe30:2081) + + ; egress (private interface) info + pktq_in_prv = RXQ0.0 + + ;for pub port <-> prv port mapping (prv, pub) + prv_to_pub_map = (0,1) + prv_que_handler = (0) + + [PIPELINE2] + type = TXRX + core = 1 + pktq_in = RXQ0.0 RXQ1.0 + pktq_out = SWQ0 SWQ1 SWQ2 + pipeline_txrx_type = RXRX + + [PIPELINE3] + type = LOADB + core = 2 + pktq_in = SWQ0 SWQ1 + pktq_out = SWQ3 SWQ4 SWQ5 SWQ6 SWQ7 SWQ8 SWQ9 SWQ10 + outport_offset = 136 + n_vnf_threads = 4 ; Number of worker threads + prv_que_handler = (0) + n_lb_tuples = 5 ; tuple(src_ip,dst_ip, src_port, dst_port, protocol) + ;loadb_debug = 0 + + [PIPELINE4] + type = VFW + core = 3 + pktq_in = SWQ3 SWQ4 + pktq_out = SWQ11 SWQ12;TXQ0.0 TXQ1.0 + + n_rules = 4096 ; Max number of ACL rules + ;n_flows gets round up to power of 2 + n_flows = 1048576 ; Max number of connections/flows per vFW WT + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 ; TCP Connection WAIT timeout + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 ; UDP timeouts for unreplied traffic + udp_replied = 180 ; UDP timeout for replied traffic + + [PIPELINE5] + type = VFW + core = 4 + pktq_in = SWQ5 SWQ6 + pktq_out = SWQ13 SWQ14;TXQ0.0 TXQ1.0 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE6] + type = VFW + core = 5 + pktq_in = SWQ7 SWQ8 + pktq_out = SWQ15 SWQ16 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE7] + type = VFW + core = 6 + pktq_in = SWQ9 SWQ10 + pktq_out = SWQ17 SWQ18 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE8] + type = TXRX + core = 1h + pktq_in = SWQ11 SWQ12 SWQ13 SWQ14 SWQ15 SWQ16 SWQ17 SWQ18 + pktq_out = TXQ0.1 TXQ1.1 TXQ0.2 TXQ1.2 TXQ0.3 TXQ1.3 TXQ0.4 TXQ1.4 + pipeline_txrx_type = TXTX + + +2. HWLB, IPv4, Single Port Pair, 4 WT: + +This configuration doesn't require LOADB and TXRX pipelines + + :: + + [PIPELINE0] + type = MASTER + core = 0 + + [PIPELINE1] + type = ARPICMP + core = 0 + pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 + pktq_out = TXQ0.0 TXQ1.0 + + ; egress (private interface) info + pktq_in_prv = RXQ0.0 + + ;for pub port <-> prv port mapping (prv, pub) + prv_to_pub_map = (0,1) + prv_que_handler = (0) + + [PIPELINE2] + type = VFW + core = 1 + pktq_in = RXQ0.0 RXQ1.0 + pktq_out = TXQ0.1 TXQ1.1 SWQ0 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE3] + type = VFW + core = 2 + pktq_in = RXQ0.1 RXQ1.1 + pktq_out = TXQ0.2 TXQ1.2 SWQ1 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE4] + type = VFW + core = 3 + pktq_in = RXQ0.2 RXQ1.2 + pktq_out = TXQ0.3 TXQ1.3 SWQ2 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + [PIPELINE5] + type = VFW + core = 4 + pktq_in = RXQ0.3 RXQ1.3 + pktq_out = TXQ0.4 TXQ1.4 SWQ3 + + n_rules = 4096 + ;n_flows gets round up to power of 2 + n_flows = 1048576 + + traffic_type = 4 ; IPv4 Traffic + ;traffic_type = 6 ; IPv6 Traffic + ; tcp_time_wait controls timeout for closed connection, normally 120 + tcp_time_wait = 10 + tcp_be_liberal = 0 + ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 + udp_unreplied = 180 + udp_replied = 180 + + +vACL Config files +---------------- + +The reference configuration files explained here are for Software and Hardware +loadbalancing with IPv4 traffic type and single port pair. +For other configurations liek IPv6 and Multi-port, refer to example config +files provided as part of the source code in config(VNFs/vACL/config) folder +of the VNFs. + +1. SWLB, IPv4, Single Port Pair, 1 WT: + + :: + + [EAL] + # add pci whitelist eg below + w = 05:00.0 ; Network Ports binded to dpdk + w = 05:00.1 ; Network Ports binded to dpdk + + [PIPELINE0] + type = MASTER + core = 0 + + [PIPELINE1] + type = ARPICMP + core = 0 + pktq_in = SWQ2 + pktq_out = SWQ7 + pktq_in_prv = RXQ0.0 + prv_to_pub_map = (0,1) + prv_que_handler = (0) + + [PIPELINE2] + type = TXRX + core = 1 + pktq_in = RXQ0.0 RXQ1.0 + pktq_out = SWQ0 SWQ1 SWQ2 + pipeline_txrx_type = RXRX + dest_if_offset = 176 + + [PIPELINE3] + type = LOADB + core = 2 + pktq_in = SWQ0 SWQ1 + pktq_out = SWQ3 SWQ4 + outport_offset = 136 + phyport_offset = 204 + n_vnf_threads = 1 + prv_que_handler = (0) + + [PIPELINE4] + type = ACL + core = 3 + pktq_in = SWQ3 SWQ4 + pktq_out = SWQ5 SWQ6 + n_flows = 1000000 + pkt_type = ipv4 + traffic_type = 4 + + [PIPELINE5] + type = TXRX + core = 1h + pktq_in = SWQ5 SWQ6 SWQ7 + pktq_out = TXQ0.0 TXQ1.0 + pipeline_txrx_type = TXTX + + +2. SWLB, IPv4, Single Port Pair, 1 WT: + + :: + + [EAL] + # add pci whitelist eg below + w = 05:00.0 + w = 05:00.1 + + [PIPELINE0] + type = MASTER + core = 0 + + [PIPELINE1] + type = ARPICMP + core = 0 + pktq_in = SWQ0 + pktq_out = TXQ0.0 TXQ1.0 + pktq_in_prv = RXQ0.0 + prv_to_pub_map = (0,1) + prv_que_handler = (0) + + [PIPELINE2] + type = ACL + core = 1 + pktq_in = RXQ0.0 RXQ1.0 + pktq_out = TXQ0.1 TXQ1.1 SWQ0 + n_flows = 1000000 + pkt_type = ipv4 + traffic_type = 4 + + + |