diff options
author | 2017-07-13 21:26:50 -0700 | |
---|---|---|
committer | 2017-07-14 04:58:47 -0700 | |
commit | 7286b2518ec8e4398b512ce95def9166a7af2e4a (patch) | |
tree | c93ef65d9e73e8893ccecb720152e16aae96a8b6 /VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg | |
parent | adcb79da90176b27224eeb1d00aa0e611ef85a9b (diff) |
Adding PROX(Packet pROcessing eXecution engine) VNF to sampleVNF
JIRA: SAMPLEVNF-55
PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
(We are moving PROX version v039 to sampleVNF
https://01.org/intel-data-plane-performance-demonstrators/prox-overview)
Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Diffstat (limited to 'VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg')
-rw-r--r-- | VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg b/VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg new file mode 100644 index 00000000..48321c0d --- /dev/null +++ b/VNFs/DPPD-PROX/config/bng-ovs-usv-4ports.cfg @@ -0,0 +1,137 @@ +;; +;; Copyright (c) 2010-2017 Intel Corporation +;; +;; Licensed under the Apache License, Version 2.0 (the "License"); +;; you may not use this file except in compliance with the License. +;; You may obtain a copy of the License at +;; +;; http://www.apache.org/licenses/LICENSE-2.0 +;; +;; Unless required by applicable law or agreed to in writing, software +;; distributed under the License is distributed on an "AS IS" BASIS, +;; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +;; See the License for the specific language governing permissions and +;; limitations under the License. +;; + +;; +; This configuration is provided for virtualized environments running on top of +; a soft-switch. Specifically, ingredients are Open vSwitch (openvswitch.org) +; and Qemu version 1.6.2. Note that since the currently supported version of +; Open vSwitch does not handle all the protocols that are used in the full BNG, +; PROX has to be recompiled to use different packet processing paths as a +; workaround. DPDK version 1.8.0 should be used with this configuration and it +; has to be compiled with COMBINE_LIBS enabled: +; make install T=$RTE_TARGET CONFIG_RTE_BUILD_COMBINE_LIBS=y CONFIG_RTE_LIBRTE_VHOST=y +; The following commands demonstrate how to set up Open vSwitch: +; git clone https://github.com/openvswitch/ovs.git +; cd ovs +; git checkout 5c62a855c7bb24424cbe7ec48ecf2f128db8b102 +; ./boot.sh && ./configure --with-dpdk=$RTE_SDK/$RTE_TARGET --disable-ssl && make +; This configuration is intended to be used in a VM with 4 virtual ports. This +; means that 4 virtual ports (with type dpdkvhost) and 4 physical ports (with +; type dpdk) will need to be added and connected through open-flow commands in +; Open vSwitch. After Open vSwitch has been set up on the host, PROX needs to be +; recompiled in the VM as follows before running it with this configuration: +; make BNG_QINQ=n MPLS_ROUTING=n +;; + +[eal options] +-n=4 ; force number of memory channels +no-output=no ; disable DPDK debug output + +[port 0] +name=cpe0 +mac=00:00:00:00:00:01 +[port 1] +name=inet0 +mac=00:00:00:00:00:03 +[port 2] +name=cpe1 +mac=00:00:00:00:00:02 +[port 3] +name=inet1 +mac=00:00:00:00:00:04 +[variables] +$wk=5s0,6s0 + +[defaults] +mempool size=16K +[lua] +lpm4 = dofile("ipv4.lua") +user_table =dofile("user_table-65K-bng.lua") +[global] +start time=20 +name=BNG (OVS) + +[core 0s0] +mode=master +; IPv4 +;***************************************************************************************** +;##### Load Balancing receiving from CPE and from Internet #### +[core 1s0] +name=LB-cpe +task=0 +mode=nop +rx ring=yes +tx port=cpe0 +task=1 +mode=lbqinq +rx port=cpe0 +tx cores=(${wk})t0 proto=ipv4 + +[core 2s0] +name=LB-inet +task=0 +mode=nop +rx ring=yes +tx port=inet0 +task=1 +mode=lbnetwork +rx port=inet0 +untag mpls=yes +tx cores=(${wk})t1 proto=ipv4 + +[core 3s0] +name=LB-cpe +task=0 +mode=nop +rx ring=yes +tx port=cpe1 +task=1 +mode=lbqinq +rx port=cpe1 +tx cores=(${wk})t0 proto=ipv4 + +[core 4s0] +name=LB-inet +task=0 +mode=nop +rx ring=yes +tx port=inet1 +task=1 +mode=lbnetwork +untag mpls=yes +rx port=inet1 +tx cores=(${wk})t1 proto=ipv4 + +;***************************************************************************************** +;#### Workers receiving from LB +;#### Task 0: Upstream traffic +;#### Task 1: Downstream traffic +[core $wk] +name=Worker +task=0 +mode=qinqdecapv4 +rx ring=yes +tx cores from routing table=2s0,4s0 +route table=lpm4 +local ipv4=21.22.23.24 +handle arp=no +user table=user_table + +task=1 +mode=qinqencapv4 +rx ring=yes +tx cores from cpe table=1s0,3s0 remap=cpe0,cpe1 +user table=user_table |