adding centos 8 dockerfile for ovn & ovn4k8s-nfv images

Signed-off-by: Kuralamudhan Ramakrishnan <kuralamudhan.ramakrishnan@intel.com>
Change-Id: Ib161ea39fc6da9a7649142271a781b3140068d15

1 files changed, 0 insertions, 158 deletions

diff --git a/utilities/docker/debian/ovn4nfv-k8s.sh b/utilities/docker/debian/ovn4nfv-k8s.sh
deleted file mode 100755
index ee60e2b..0000000
--- a/utilities/docker/debian/ovn4nfv-k8s.sh
+++ /dev/null
@@ -1,158 +0,0 @@
-#!/usr/bin/env bash
-OVS_RUNDIR=/var/run/openvswitch
-OVS_LOGDIR=/var/log/openvswitch
-
-DB_NB_ADDR=${DB_NB_ADDR:-::}
-DB_NB_PORT=${DB_NB_PORT:-6641}
-DB_SB_ADDR=${DB_SB_ADDR:-::}
-DB_SB_PORT=${DB_SB_PORT:-6642}
-cmd=${1:-""}
-
-if [[ -f /usr/bin/ovn-appctl ]] ; then
-    # ovn-appctl is present. Use new ovn run dir path.
-    OVN_RUNDIR=/var/run/ovn
-    OVNCTL_PATH=/usr/share/ovn/scripts/ovn-ctl
-    OVN_LOGDIR=/var/log/ovn
-    OVN_ETCDIR=/etc/ovn
-else
-    # ovn-appctl is not present. Use openvswitch run dir path.
-    OVN_RUNDIR=/var/run/openvswitch
-    OVNCTL_PATH=/usr/share/openvswitch/scripts/ovn-ctl
-    OVN_LOGDIR=/var/log/openvswitch
-    OVN_ETCDIR=/etc/openvswitch
-fi
-
-check_ovn_control_plane() {
-    /usr/share/ovn/scripts/ovn-ctl status_northd
-    /usr/share/ovn/scripts/ovn-ctl status_ovnnb
-    /usr/share/ovn/scripts/ovn-ctl status_ovnsb
-}
-
-check_ovn_controller() {
-    /usr/share/ovn/scripts/ovn-ctl status_controller
-}
-
-# wait for ovn-sb ready
-wait_ovn_sb() {
-    if [[ -z "${OVN_SB_TCP_SERVICE_HOST}" ]]; then
-        echo "env OVN_SB_SERVICE_HOST not exists"
-        exit 1
-    fi
-    if [[ -z "${OVN_SB_TCP_SERVICE_PORT}" ]]; then
-        echo "env OVN_SB_SERVICE_PORT not exists"
-        exit 1
-    fi
-    while ! nc -z "${OVN_SB_TCP_SERVICE_HOST}" "${OVN_SB_TCP_SERVICE_PORT}" </dev/null;
-    do
-        echo "sleep 10 seconds, waiting for ovn-sb ${OVN_SB_TCP_SERVICE_HOST}:${OVN_SB_TCP_SERVICE_PORT} ready "
-        sleep 10;
-    done
-}
-
-start_ovs_vswitch() {
-    wait_ovn_sb
-    function quit {
-	/usr/share/openvswitch/scripts/ovs-ctl stop
-	/usr/share/openvswitch/scripts/ovn-ctl stop_controller
-	exit 0
-    }
-    trap quit EXIT
-    /usr/share/openvswitch/scripts/ovs-ctl restart --no-ovs-vswitchd --system-id=random
-    # Restrict the number of pthreads ovs-vswitchd creates to reduce the
-    # amount of RSS it uses on hosts with many cores
-    # https://bugzilla.redhat.com/show_bug.cgi?id=1571379
-    # https://bugzilla.redhat.com/show_bug.cgi?id=1572797
-    if [[ `nproc` -gt 12 ]]; then
-        ovs-vsctl --no-wait set Open_vSwitch . other_config:n-revalidator-threads=4
-        ovs-vsctl --no-wait set Open_vSwitch . other_config:n-handler-threads=10
-    fi
-
-    # Start ovsdb
-    /usr/share/openvswitch/scripts/ovs-ctl restart --no-ovsdb-server  --system-id=random
-    /usr/share/openvswitch/scripts/ovs-ctl --protocol=udp --dport=6081 enable-protocol
-    
-}
-
-#cleanup_ovs_server() {
-#}
-
-#cleanup_ovs_controller() {
-#}
-
-function get_default_inteface_ipaddress {
-    local _ip=$1
-    local _default_interface=$(awk '$2 == 00000000 { print $1 }' /proc/net/route)
-    local _ipv4address=$(ip addr show dev $_default_interface | awk '$1 == "inet" { sub("/.*", "", $2); print $2 }')
-    eval $_ip="'$_ipv4address'"
-}
-
-start_ovn_control_plane() {
-    function quit {
-        /usr/share/openvswitch/scripts/ovn-ctl stop_northd
-         exit 0
-    }
-    trap quit EXIT
-    /usr/share/openvswitch/scripts/ovn-ctl restart_northd
-    ovn-nbctl set-connection ptcp:"${DB_NB_PORT}":["${DB_NB_ADDR}"]
-    ovn-nbctl set Connection . inactivity_probe=0
-    ovn-sbctl set-connection ptcp:"${DB_SB_PORT}":["${DB_SB_ADDR}"]
-    ovn-sbctl set Connection . inactivity_probe=0
-    tail -f /var/log/openvswitch/ovn-northd.log
-}
-
-start_ovn_controller() {
-    function quit {
-	/usr/share/openvswitch/scripts/ovn-ctl stop_controller
-	exit 0
-    }
-    trap quit EXIT
-    wait_ovn_sb
-    get_default_inteface_ipaddress node_ipv4_address
-    /usr/share/openvswitch/scripts/ovn-ctl restart_controller
-    # Set remote ovn-sb for ovn-controller to connect to
-    ovs-vsctl set open . external-ids:ovn-remote=tcp:"${OVN_SB_TCP_SERVICE_HOST}":"${OVN_SB_TCP_SERVICE_PORT}"
-    ovs-vsctl set open . external-ids:ovn-remote-probe-interval=10000
-    ovs-vsctl set open . external-ids:ovn-openflow-probe-interval=180
-    ovs-vsctl set open . external-ids:ovn-encap-type=geneve
-    ovs-vsctl set open . external-ids:ovn-encap-ip=$node_ipv4_address
-    tail -f /var/log/openvswitch/ovn-controller.log
-}
-
-set_nbclt() {
-    wait_ovn_sb
-    ovn-nbctl --db=tcp:["${OVN_NB_TCP_SERVICE_HOST}"]:"${OVN_NB_TCP_SERVICE_PORT}" --pidfile --detach --overwrite-pidfile
-}
-
-check_ovs_vswitch() {
-    /usr/share/openvswitch/scripts/ovs-ctl status
-}
-
-case ${cmd} in
-  "start_ovn_control_plane")
-        start_ovn_control_plane
-    ;;
-  "check_ovn_control_plane")
-        check_ovn_control_plane
-    ;;
-  "start_ovn_controller")
-        start_ovs_vswitch
-        set_nbclt
-        start_ovn_controller 
-    ;;
-  "check_ovs_vswitch")
-        check_ovs_vswitch
-    ;;
-  "check_ovn_controller")
-        check_ovs_vswitch
-        check_ovn_controller
-    ;;
-  "cleanup_ovs_controller")
-        cleanup_ovs_controller
-    ;;
-  *)
-    echo "invalid command ${cmd}"
-    echo "valid commands: start-ovn-control-plane check_ovn_control_plane start-ovs-vswitch"
-    exit 0
-esac
-
-exit 0