Age | Commit message (Collapse) | Author | Files | Lines |
|
* Update docs/submodules/fuel from branch 'master'
- [HA] [cinder] Fix rootfs part name for sda > 2TB
On systems with more than 2TB on /dev/sda, MaaS automatically creates
a 1MB partition with bios_grub label as /dev/sda1.
Account for this and expect rootfs to reside on /dev/sda2 (assume
all compute nodes have the same behavior wrt this issue).
Ideally, later we will switch to explicit partitioning via MaaS, or to
a new baremetal provisioner like Ironic.
Requires bumping Pharos git submodule to pick up the new j2 filter.
Fixes: f6f8a56
JIRA: FUEL-330
Change-Id: I12f5046cf69bf2f52c8b8dc331b90048df643646
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/pharos from branch 'master'
- gen_config_lib: Add storage_size_num filter
New filter for converting PDF disk_capacity strings into a numeric
only string (to bypass scientific notation), parsable as float.
Change-Id: I779bec7db03ef1b3ce1bfd6ca239a3e7b4021eb2
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Merge "add a multus with 2 fannel interfaces installation"
- add a multus with 2 fannel interfaces installation
Support deploying multus multiple flannel CNI plugins by setting
environment "kube_network_plugin" to "2flannel".
Change-Id: I23a3d42452b4a5e0858a18934f508649f5961e7a
Signed-off-by: Di Xu <di.xu@arm.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Move generation of artifacts.opnfv.org to jenkins
Move generation of artifacts.opnfv.org/index.html
and sub pages into a jenkins job.
Script was run on cron on master previously.
run on lf-build2
Run job once per hour (it takes a long time to run)
Block if job is already running
Change-Id: Icc03cac61a802e036e4af8a9b9e3a244e147abea
Signed-off-by: agardner <agardner@linuxfoundation.org>
|
|
* Update docs/submodules/barometer from branch 'master'
- compose: modify zookeeper tag and add container names
Change-Id: I676940bb0d5c7d9e181d27b15130e6ec4a4ececd
Signed-off-by: Gordon Kelly <gordon.kelly@intel.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Leverage of snaps creds to get the right region name"
- Leverage of snaps creds to get the right region name
Else it gets the defaut value as it's unset in env.
Change-Id: Ic2a9cdaed7891fe2723f960782c81c0cbb04e8f0
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Print stdout and stderr when calling commands over SSH"
- Print stdout and stderr when calling commands over SSH
It will help debugging possible issues vs APEX [1].
[1] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-master/792/console
Change-Id: I610f5b0a7774440c51fa086fad4f61c9be0571dc
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Create a second user in cloudify_vrouter
It mainly bypasses a bug when a similar network name has already been
created.
We can't apply the same operations for cloudify_vims because the key
must be created by the _member_ user.
Snaps haven't allowed that since [1] has been merged
[1] https://gerrit.opnfv.org/gerrit/#/c/52157/
Change-Id: I90131487d0e08a4d95c684efb16a8009c3709a8e
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- Correct the BIFROST_IRONIC_VERSION variable
By mistake the BIFROST_IRONIC_VERSION variable was
written BIFROST_IRONIC_CLIENT_VERSION
Change-Id: Ie35a4938a2fb38c633dd149c1d18f1da20a4e82a
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- [HA] [cinder] Switch loop to free space on sda
On cmp nodes, we assing 30G (fixed) to rootfs, use the rest for
cinder.
Note: AArch64 gets one extra partition (the EFI System Partition or
ESP) on /dev/sda1 via MaaS.
JIRA: FUEL-330
Change-Id: I2a36107d074532b627bd2349cafc0c8ee61f500f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
- [salt.sh] Armband extra repo for forked reclass
- add Armband nightly/extra DEB repository;
- install forked and updated reclass 1.5.2 which includes:
* better error reporting;
* support for deleting existing keys during list interpolation;
* various other improvements and optimizations;
While at it, update copyright year for patches.
JIRA: FUEL-345
Change-Id: I00d8b625fe191648e7ea34b3dd4c8375691384e6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "Add functest-kubernetes repo to lint verification"
- Add functest-kubernetes repo to lint verification
Change-Id: Ia1e05db344e6e6b4a773bf17157488716ac0c305
Signed-off-by: Jose Lausuch <jalausuch@suse.com>
|
|
* Update docs/submodules/sfc from branch 'master'
- Update XCI deployment files
We are now aligned with master so we don't need a-r-r file anymore or the
OpenStack versions file
Change-Id: Ida0b8f0414870d5fa3fecdc79564def345187b2e
Signed-off-by: Manuel Buil <mbuil@suse.com>
|
|
* Update docs/submodules/snaps from branch 'master'
- openstack: nova_utils_tests: Wait for volume detachment
The 'test_add_remove_volum' is supposed to wait for volume attachment
and detachments. However, the code for the latter was missing. Moreover,
we remove some code that checks for attached volumes since that should
never happen when detaching the volume.
Change-Id: I9ed54a467062d0ddc4efeddf03af7ebe6173e789
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/snaps from branch 'master'
- openstack: nova_utils_tests: Increase timeout for API calls
Patch I2245adb84d0e6d4e3350d17d0c2e44baf5202d51 increased the timeout
for the API calls to 2 minutes which was then somewhat reverted in
Iea3aeab59c378917fbd175d673113e8d30e2e4b9. However, the problem still
persists on slow systems and 30 seconds may not be enough to confirm
a volume attachment to the VM.
Change-Id: I860b2a797917e13772e95c5d756919e9792b63a6
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/joid from branch 'master'
- modfiied to reflect the supported version only.
Change-Id: Ib8fd3588376a160a4e1c9260ed7a6b51635f6152
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
|
|
* Update docs/submodules/sfc from branch 'master'
- Take into account last Functest config updates
It follows the next changes (Functest) which renamed the related
config entry [1].
[1] https://gerrit.opnfv.org/gerrit/#/c/51283/5/functest/ci/config_functest.yaml
Change-Id: Ieae5baff13bb70aa35b01c2358ab4865cdb9dfb0
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/yardstick from branch 'master'
- Merge "Bug fix for Ansible destroy VM script"
- Bug fix for Ansible destroy VM script
Modified the destroy script to ignore errors as 2 possible
problems can cause a play to fail.
1. A VM can be running but undefined.
2. A VM can be destroyed but still running.
JIRA: YARDSTICK-1006
Change-Id: Ib66f48401bfefb598f553cfef31bfa2682f5a584
Signed-off-by: John O Loughlin <john.oloughlin@intel.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "Rename var XCI_LOOP to CI_LOOP to align with Functest"
- Rename var XCI_LOOP to CI_LOOP to align with Functest
Change-Id: If5c5b828312dc588515589b8075b9754537b8f86
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "jjb: xci: Fix bifrost blockers for XCI jobs"
- jjb: xci: Fix bifrost blockers for XCI jobs
The bifrost regexp was wrong leading to conflicts betwen the XCI
and bifrost jobs. Moreover, we need to add the same restrictions for
jobs/node on bifrost jobs similar to the XCI ones. This finally fixes
the 'throttle' property to use the 'xci-verify-virtual' category.
Change-Id: I6d3f8fdd82738c1d079b1a3fdef134753eb4281a
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- Merge "xci: xci-deploy.sh: Calculate and print the total deployment time"
- xci: xci-deploy.sh: Calculate and print the total deployment time
It's useful to know how XCI performs in terms of duration time so
use the bash $SECONDS variable to calculate the total amount of time
it takes for a full XCI deployment. Moreover, use the 'ts' command to
print a timestamp for every command executed. This will help developers
identify tasks which take a lot of time to complete and possibly
optimize them.
Change-Id: I75a8cb8c05957bb205e63210d6cafaf54d989f32
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/sfc from branch 'master'
- Merge "Switch from CONST to env.get()"
- Switch from CONST to env.get()
env.get() ensures that default values are reused if unset.
It also avoids desynchronization between os.environ and CONST.
It follows the change "Get properly env vars or their default values"
[1] applied in Functest.
It also fixes minor issues on shebangs and takes several pylint rules
into account in this module:
- http://pylint-messages.wikidot.com/messages:w0702
- https://www.python.org/dev/peps/pep-0282/
[1] https://gerrit.opnfv.org/gerrit/#/c/52221/
Change-Id: Ia7ad168b2cbbade8ea3890fb95dc01bcdfc50468
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- Merge "xci: playbooks: run-functest: Collect functest results"
- xci: playbooks: run-functest: Collect functest results
Add a new volume to the docker container which will hold the results
from the functest run.
Change-Id: I70541a8337c9198a97304312adfab74d4dd06b70
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- xci: Switch VM disk cache to 'unsafe' and use 'iothreads' for I/O
According to the docs[1]
"writeback: This mode causes the hypervisor to interact with the disk
image file or block device with neither O_DSYNC nor O_DIRECT semantics.
The host page cache is used and writes are reported to the guest as
completed when they are placed in the host page cache. The normal page
cache management will handle commitment to the storage device.
Additionally, the guest's virtual storage adapter is informed of the
writeback cache, so the guest would be expected to send down flush
commands as needed to manage data integrity. Analogous to a raid
controller with RAM cache."
and
"writeback: This mode informs the guest of the presence of a write
cache, and relies on the guest to send flush commands as needed to
maintain data integrity within its disk image. This is a common
storage design which is completely accounted for within modern file
systems. This mode exposes the guest to data loss in the unlikely case
of a host failure, because there is a window of time between the time
a write is reported as completed, and that write being committed to the
storage device."
"unsafe: This mode is similar to writeback caching except for the
following: the guest flush commands are ignored, nullifying the data
integrity control of these flush commands, and resulting in a higher
risk of data loss because of host failure. The name “unsafe” should
serve as a warning that there is a much higher potential for data
loss because of a host failure than with the other modes. As the
guest terminates, the cached data is flushed at that time."
It's beneficial to use the host page cache to cache I/O from the guest
instead of waiting for data to reach the actual disk device. We do not
normally care about data integrity so data loss is not a problem.
Moreover, we drop the cache configuration from the flavor files since
it's independent of the flavor that's being deployed.
[1] https://www.suse.com/documentation/sles-12/singlehtml/book_virt/book_virt.html#cha.cachemodes
Change-Id: I118ffdf84b1be672185b3eff60fe5d0b5f1a590d
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "jjb: xci: bifrost-verify-jobs: Increase build-timeout value"
- jjb: xci: bifrost-verify-jobs: Increase build-timeout value
The bifrost jobs could run in parallel with the XCI ones so it may take
longer than 90 minutes to complete. Lets double the timeout value in
order to ensure that we don't fail due to a Jenkins timeout.
Change-Id: I53a442f434d839d891bf03e41ba1a6a4459fd878
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/compass4nfv from branch 'master'
- Support featrue plugin for k8s
JIRA: COMPASS-587
Enable plugin siwtch list for k8s scenario.
Change-Id: Id9286567faf47be2bbaa7982a6fcadea92e16ad2
Signed-off-by: Harry Huang <huangxiangyu5@huawei.com>
|
|
* Update docs/submodules/armband from branch 'master'
- u/fuel: Bump & rebase for set_storage_layout
Change-Id: Icfb495619b178af90998a82e4b359445649a7284
|
|
* Update docs/submodules/releng from branch 'master'
- Merge "Remove 'cd && pull' commands from jjb-merge job"
- Remove 'cd && pull' commands from jjb-merge job
These are no longer needed since the server has been migrated, and a git
clone already exists in the workspace.
Change-Id: I07b5ff9185323d7295578b23a634e2d0e03afcd7
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
|
|
* Update docs/submodules/releng from branch 'master'
- jenkins-jnlp-connect.sh takes time to launch
wget --timestamping https://build.opnfv.org/ci/jnlpJars/slave.jar && true
this takes time, especially from china.
Tell monit to back off while waiting for the pid file to
be created
Change-Id: I02327323d50d0a4a8b379535d8da84a20348ba6f
Signed-off-by: agardner <agardner@linuxfoundation.org>
|
|
* Update docs/submodules/yardstick from branch 'master'
- Merge "Proposing Abhijit Sinha as a committer in Yardstick"
- Proposing Abhijit Sinha as a committer in Yardstick
Abhijit Sinha has contributed to the Yardstick project in many ways
Achievements/Contributions include:
- PROX VNF and TG for NFVi characterization tests
- Attending Yardstick meetings
- PROX Grafanfa dashboards
Change-Id: I455ff22b8cb68c6422fc864659668412bed3e9c4
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
* Update docs/submodules/pharos from branch 'master'
- generate_config: Move filters to external library
Clean and isolate main script logic from custom filters by moving
all them to a external library file.
Library has a function to load all the existing filters at once.
New enhanced IP handling custom filters:
- ipnet_hostaddr
- ipnet_hostmin
- ipnet_hostmax
- ipnet_broadcast
- ipnet_netmask
- ipnet_contains_ip
- ipnet_contains_iprange
- ipnet_range_size
ipnet filters work with proper IP network with prefixlen mask,
ensuring consistent IP calculations and error handling.
Previous IP handling filters should be deprecated.
Change-Id: I83c41d7ad3c6bd1d9df1deca6cc5b9d2481ecf52
Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
|
|
* Update docs/submodules/sfc from branch 'master'
- Bump os_keystone SHA for Pike deployment
Change-Id: Ic1dfe50cbf8f1567a055aa8780e671333f67e880
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- Reset kernel version to xenial image default one
Virtual compute nodes goes to kernel panic during nova instances ops
under hwe kernel, so use the default one from xenial image.
Change-Id: Iae100b68208cc1fb9e43e45f385e762cdbd6573a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* Update docs/submodules/snaps from branch 'master'
- Ensure project IDs are handled correctly for Network/Subnets
JIRA: SNAPS-265
Change-Id: If58f5817e52e21be377d2b06a5f7c3a413454350
Signed-off-by: spisarski <s.pisarski@cablelabs.com>
|
|
* Update docs/submodules/fuel from branch 'master'
- [reclass] dbs, msg: Inherit only infra classes
All other VCP nodes (mdb, prx, ctl etc.) inherit only the infra
subdir of each scenario, so apply the same to dbs, msg.
This should cut down some operations during reclass interpolation
for affected nodes, without any changes in output pillar data.
Change-Id: I77ae6e1d5658cba87fcd8c45a5f8f5e177e0eda9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
- [reclass] Update copyright year
Change-Id: Id1ca66938531e1d24ec0d44194f8b09643062944
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Remove deprecated monkey patches"
- Remove deprecated monkey patches
OpenStack utils are being removed.
Change-Id: I2a41297034654f678afa5a7a818961a4cd0cee73
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Remove last CONST.__getattribute__()"
- Remove last CONST.__getattribute__()
Change-Id: I82f6aa1e723c88eebd4c7410da4b9741a482e9bc
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Merge "Generate tempest verification report (HTML)"
- Generate tempest verification report (HTML)
JIRA: FUNCTEST-934
Change-Id: I2befbd3f2b2311f69b24321c7e9544fb43df3a9d
Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Manage region in cloudify_ims.py
It must be completed by a new change in opnfv-cloudify-clearwater [1].
[1] https://github.com/Orange-OpenSource/opnfv-cloudify-clearwater/pull/18
Change-Id: Ic3a323e33b9742835159f5386e9247c6ac965f51
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Fix credentials in cloudify_vrouter
It completes [1] which partially fixes cloudify_vrouter [2].
It now handles region name too and formats long arg lists too.
[1] https://gerrit.opnfv.org/gerrit/#/c/52175/
[2] https://gerrit.opnfv.org/gerrit/#/c/50747/
Change-Id: I592d12d7df6837531560acfc4afc0636f485c671
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/nfvbench from branch 'master'
- Move docker build to 1.2.4
Change-Id: Id923d9a7217fe91b7940e059e1bda7503e846687
Signed-off-by: ahothan <ahothan@cisco.com>
|
|
* Update docs/submodules/sdnvpn from branch 'master'
- resync and ecmp testcase failure
This provide fix for resync and ecmp test case failures
at the CI master runs. Please have a look at the comments
in each testcase for more details.
Change-Id: I26c40da144e34a48ad44897988675db8d37c062a
Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
|
|
* Update docs/submodules/moon from branch 'master'
- Merge "Update the documentation accordingly to the python_moonclient update"
- Update the documentation accordingly to the python_moonclient update
Change-Id: I56eed2f797d2b5c5bd1d8883be93e83b2dc1a043
|
|
* Update docs/submodules/moon from branch 'master'
- Merge "Use cliff for the moonclient cli"
- Use cliff for the moonclient cli
Change-Id: I85f9fe24037a3bd28ed069667e5e0c7fe482c2a7
|
|
* Update docs/submodules/moon from branch 'master'
- Merge "Add the moon_pythonfunctest container to perform functionnal tests"
- Add the moon_pythonfunctest container to perform functionnal tests
Change-Id: I2be863862ce7df408f759664b10af45416b3d712
|
|
* Update docs/submodules/moon from branch 'master'
- Merge "adding comments for enahancement"
- adding comments for enahancement
fix handling exception issue
return make response instead of json body
update test case to check on response false instead of status code
Change-Id: Iab8ea20fbe1713e09e79289e8bc73410bf90dc27
Signed-off-by: sgdt6900 <rhanafy.ext@orange.com>
|
|
* Update docs/submodules/netready from branch 'master'
- Deleting outdated INFO file, replaced by INFO.yaml
The old INFO file if not used anymore after it has been replaced by the
INFO.yaml file.
Change-Id: Iae22c798b68cb69bcf162ad4ceff85865809117e
Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
|
|
* Update docs/submodules/dovetail from branch 'master'
- Add 3 new HA test cases into proposed_tests test suite
Add 3 new HA test cases into proposed_tests test suite and running them on CI.
For the current 8 HA test cases and 3 other HA test cases plans to add,
do some adaptions for the Yardstick Euphrates release.
1. Don't need the bugfix patch anymore.
2. The data format has changed, and has done some adaptions.
3. For Yardstick Euphrates, if setting OS_INSECURE=True, it needs to set
OS_CACERT=False
4. Test case tc011 needs a image and flavor to create the stack.
JIRA: DOVETAIL-614
JIRA: DOVETAIL-586
Change-Id: I9da8c8316246b9edee0d81ad18422ae6018becaf
Signed-off-by: xudan <xudan16@huawei.com>
|
|
* Update docs/submodules/releng-xci from branch 'master'
- bifrost: scripts: bifrost-provision.sh: Set defaults for Ironic variables
When running the bifrost jobs for the OPNFV 3rd Party CI, the Ironic
variables are not defined and we get the following error:
./scripts/bifrost-provision.sh: line 112: BIFROST_IRONIC_INSPECTOR_VERSION: unbound variable
As such, we need to provide reasonable defaults when we are running this
script outside of XCI.
Change-Id: I9cc3ae1b70494637a85558b9cae99fc1eeaebc74
Signed-off-by: Markos Chandras <mchandras@suse.de>
|
|
* Update docs/submodules/functest from branch 'master'
- Disable orchestra_clearwaterims in functest-vnf
It fixes a typo.
Change-Id: I684eab0ed74e2ebcb6f72442d0b3012d1b5de7aa
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
* Update docs/submodules/functest from branch 'master'
- Precise Tempest tests list
Else full mode could run tests defined in tempest plugins too [1].
[1] https://docs.openstack.org/tempest/latest/plugin-registry.html
Change-Id: I4355b03ba1b9ba47938f748c4f1a8822fd412142
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|