diff options
Diffstat (limited to 'util/ks.cfg')
| -rw-r--r-- | util/ks.cfg | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/util/ks.cfg b/util/ks.cfg deleted file mode 100644 index 8955e0c..0000000 --- a/util/ks.cfg +++ /dev/null @@ -1,228 +0,0 @@ -############################################################################## -# Copyright (c) 2016-2017 HUAWEI TECHNOLOGIES CO.,LTD and others. -# -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## -#version=DEVEL -# System authorization information -auth --useshadow --enablemd5 -# Install OS instead of upgrade -install -# License agreement -eula --agreed -# Use text mode install -text -# Firewall configuration -firewall --disabled -firstboot --disable -# Keyboard layouts -# old format: keyboard us -# new format: -keyboard --vckeymap=us --xlayouts='us' -network --onboot no --device eth0 --bootproto dhcp --noipv6 -network --onboot no --device eth1 --bootproto dhcp --noipv6 -network --onboot no --device eth2 --bootproto dhcp --noipv6 -# System language -lang en_US.UTF-8 -# Installation logging level -logging --level=info -# Reboot after installation -reboot -# Root password -rootpw root -# SELinux configuration -selinux --disabled -# System services -services --enabled="NetworkManager,sshd" -# Do not configure the X Window System -skipx -# System timezone -timezone America/Los_Angeles --isUtc - -# System bootloader configuration -%include /tmp/bootloader.ks - -# Clear the Master Boot Record -zerombr -# Partition clearing information -clearpart --all --initlabel - -# Disk partitioning information -%include /tmp/partition.ks - -%pre -#!/bin/sh - -set -x -v -exec 1>/tmp/ks-pre.log 2>&1 -# Once root's homedir is there, copy over the log. -while : ; do - sleep 10 - if [ -d /mnt/sysimage/root ]; then - cp /tmp/ks-pre.log /mnt/sysimage/root/ - logger "Copied %pre section log to system" - break - fi -done & - -# hard drivedd -drives=(`ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`) -default_drive=${drives[0]} - -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done - -tgtdrive=$default_drive -format_confirmed="no" - -if [ ${#drives[@]} -lt 1 ]; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - clear - echo - echo '********************************************************************' - echo '* E R R O R *' - echo '* *' - echo '* There is no suitable media available for installation. *' - echo '* Please attach a drive and try again. *' - echo '* *' - echo '********************************************************************' - echo - read -p "Press Enter to shut down the system: " _ - poweroff -fi - -# verify tgtdrive is at least 30GB -tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) -if [ $tgtdrivesize -lt 30720 ]; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - clear - echo - echo '********************************************************************' - echo '* E R R O R *' - echo '* *' - echo '* Your disk is under 30GB in size. Installation cannot continue. *' - echo '* Restart installation with a larger disk. *' - echo '* *' - echo '********************************************************************' - echo - read -p "Press Enter to restart: " _ - reboot -fi - -vgremove -ff os -dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10 -sleep 3 - -hdparm -z /dev/${tgtdrive} -parted -s /dev/${tgtdrive} mklabel gpt -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24 -parted -s /dev/${tgtdrive} set 1 bios_grub on -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224 -parted -s /dev/${tgtdrive} set 2 boot on -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424 -sleep 3 -hdparm -z /dev/${tgtdrive} - -# partition -cat << EOF > /tmp/partition.ks -part swap --asprimary --fstype="swap" --ondisk=sda --size=4096 -part /boot --asprimary --fstype="ext3" --ondisk=sda --size=500 -part pv.64 --fstype="lvmpv" --ondisk=sda --grow -volgroup os --pesize=4096 pv.64 -logvol /var --fstype="ext3" --grow --percent=40 --name=varvol --vgname=os -logvol /tmp --fstype="ext3" --grow --percent=5 --name=tmpvol --vgname=os -logvol / --fstype="ext3" --grow --percent=50 --name=rootvol --vgname=os -logvol /home --fstype="ext3" --grow --percent=5 --name=homevol --vgname=os -EOF - -# bootloader setting -echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks -%end - -%post -echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules -chmod +x /etc/rc.modules -echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf -mkdir -p /var/log/coredump -echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf - -chmod 777 /var/log/coredump -echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf -%end - -%post --nochroot --log=/root/anaconda-post-before-chroot.log -#!/bin/sh -set -x -SOURCE="/mnt/sysimage/tmp/source" -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done - -mkdir -p "${SOURCE}" -mount -o bind "/mnt/install/source" "${SOURCE}" -%end - -%post --logfile /var/log/post_install.log -set -x -v -exec 1>/root/ks-post.log 2>&1 - -function save_nic_cfg() { - scrFile="/etc/sysconfig/network-scripts/ifcfg-$1" - sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network - grep -q "^\s*$2\s+$hostname" /etc/hosts || echo "$2 $hostname" >> /etc/hosts - - echo DEVICE=$1> $scrFile - echo ONBOOT=yes >> $scrFile - echo NM_CONTROLLED=no >> $scrFile - echo HWADDR=$4 >> $scrFile - echo USERCTL=no >> $scrFile - echo PEERDNS=no >> $scrFile - echo BOOTPROTO=static >> $scrFile - echo IPADDR=$2 >> $scrFile - echo NETMASK=$3 >> $scrFile -} - -function save_gateway() { - echo GATEWAY=$external_gw >> /etc/sysconfig/network - search="domain $domain\nsearch $domain" - echo -e "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf - [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf - [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream - [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf - [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream - - if [[ -z "$dns1" && -z "$dns2" ]]; then - if [[ -z $external_gw ]]; then - echo "nameserver $gw" >> /etc/resolv.conf - else - echo "nameserver $external_gw" >> /etc/resolv.conf - fi - fi -} -# Default FQDN -hostname="open-o" - -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done -domain=$hostname - -external_ip=$external_ip -external_netmask=$external_mask -external_intf="eth0" -#external_hwaddr=`ifconfig $external_intf | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` - -save_nic_cfg $external_intf $external_ip $external_netmask $external_hwaddr - -save_gateway - -SOURCE=/tmp/source -mkdir -p /root/.ssh -chmod 700 /root/.ssh -cat ${SOURCE}/bootstrap/boot.rsa.pub >> /root/.ssh/authorized_keys - -%end - -%packages --nobase -@core -%end |