diff options
Diffstat (limited to 'util/ks.cfg')
| -rw-r--r-- | util/ks.cfg | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/util/ks.cfg b/util/ks.cfg new file mode 100644 index 0000000..8955e0c --- /dev/null +++ b/util/ks.cfg @@ -0,0 +1,228 @@ +############################################################################## +# Copyright (c) 2016-2017 HUAWEI TECHNOLOGIES CO.,LTD and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## +#version=DEVEL +# System authorization information +auth --useshadow --enablemd5 +# Install OS instead of upgrade +install +# License agreement +eula --agreed +# Use text mode install +text +# Firewall configuration +firewall --disabled +firstboot --disable +# Keyboard layouts +# old format: keyboard us +# new format: +keyboard --vckeymap=us --xlayouts='us' +network --onboot no --device eth0 --bootproto dhcp --noipv6 +network --onboot no --device eth1 --bootproto dhcp --noipv6 +network --onboot no --device eth2 --bootproto dhcp --noipv6 +# System language +lang en_US.UTF-8 +# Installation logging level +logging --level=info +# Reboot after installation +reboot +# Root password +rootpw root +# SELinux configuration +selinux --disabled +# System services +services --enabled="NetworkManager,sshd" +# Do not configure the X Window System +skipx +# System timezone +timezone America/Los_Angeles --isUtc + +# System bootloader configuration +%include /tmp/bootloader.ks + +# Clear the Master Boot Record +zerombr +# Partition clearing information +clearpart --all --initlabel + +# Disk partitioning information +%include /tmp/partition.ks + +%pre +#!/bin/sh + +set -x -v +exec 1>/tmp/ks-pre.log 2>&1 +# Once root's homedir is there, copy over the log. +while : ; do + sleep 10 + if [ -d /mnt/sysimage/root ]; then + cp /tmp/ks-pre.log /mnt/sysimage/root/ + logger "Copied %pre section log to system" + break + fi +done & + +# hard drivedd +drives=(`ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`) +default_drive=${drives[0]} + +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done + +tgtdrive=$default_drive +format_confirmed="no" + +if [ ${#drives[@]} -lt 1 ]; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + clear + echo + echo '********************************************************************' + echo '* E R R O R *' + echo '* *' + echo '* There is no suitable media available for installation. *' + echo '* Please attach a drive and try again. *' + echo '* *' + echo '********************************************************************' + echo + read -p "Press Enter to shut down the system: " _ + poweroff +fi + +# verify tgtdrive is at least 30GB +tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) +if [ $tgtdrivesize -lt 30720 ]; then + exec < /dev/tty3 > /dev/tty3 2>&1 + chvt 3 + clear + echo + echo '********************************************************************' + echo '* E R R O R *' + echo '* *' + echo '* Your disk is under 30GB in size. Installation cannot continue. *' + echo '* Restart installation with a larger disk. *' + echo '* *' + echo '********************************************************************' + echo + read -p "Press Enter to restart: " _ + reboot +fi + +vgremove -ff os +dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10 +sleep 3 + +hdparm -z /dev/${tgtdrive} +parted -s /dev/${tgtdrive} mklabel gpt +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24 +parted -s /dev/${tgtdrive} set 1 bios_grub on +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224 +parted -s /dev/${tgtdrive} set 2 boot on +parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424 +sleep 3 +hdparm -z /dev/${tgtdrive} + +# partition +cat << EOF > /tmp/partition.ks +part swap --asprimary --fstype="swap" --ondisk=sda --size=4096 +part /boot --asprimary --fstype="ext3" --ondisk=sda --size=500 +part pv.64 --fstype="lvmpv" --ondisk=sda --grow +volgroup os --pesize=4096 pv.64 +logvol /var --fstype="ext3" --grow --percent=40 --name=varvol --vgname=os +logvol /tmp --fstype="ext3" --grow --percent=5 --name=tmpvol --vgname=os +logvol / --fstype="ext3" --grow --percent=50 --name=rootvol --vgname=os +logvol /home --fstype="ext3" --grow --percent=5 --name=homevol --vgname=os +EOF + +# bootloader setting +echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks +%end + +%post +echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules +chmod +x /etc/rc.modules +echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf +mkdir -p /var/log/coredump +echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf + +chmod 777 /var/log/coredump +echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf +%end + +%post --nochroot --log=/root/anaconda-post-before-chroot.log +#!/bin/sh +set -x +SOURCE="/mnt/sysimage/tmp/source" +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done + +mkdir -p "${SOURCE}" +mount -o bind "/mnt/install/source" "${SOURCE}" +%end + +%post --logfile /var/log/post_install.log +set -x -v +exec 1>/root/ks-post.log 2>&1 + +function save_nic_cfg() { + scrFile="/etc/sysconfig/network-scripts/ifcfg-$1" + sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network + grep -q "^\s*$2\s+$hostname" /etc/hosts || echo "$2 $hostname" >> /etc/hosts + + echo DEVICE=$1> $scrFile + echo ONBOOT=yes >> $scrFile + echo NM_CONTROLLED=no >> $scrFile + echo HWADDR=$4 >> $scrFile + echo USERCTL=no >> $scrFile + echo PEERDNS=no >> $scrFile + echo BOOTPROTO=static >> $scrFile + echo IPADDR=$2 >> $scrFile + echo NETMASK=$3 >> $scrFile +} + +function save_gateway() { + echo GATEWAY=$external_gw >> /etc/sysconfig/network + search="domain $domain\nsearch $domain" + echo -e "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf + [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf + [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream + [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf + [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream + + if [[ -z "$dns1" && -z "$dns2" ]]; then + if [[ -z $external_gw ]]; then + echo "nameserver $gw" >> /etc/resolv.conf + else + echo "nameserver $external_gw" >> /etc/resolv.conf + fi + fi +} +# Default FQDN +hostname="open-o" + +for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done +domain=$hostname + +external_ip=$external_ip +external_netmask=$external_mask +external_intf="eth0" +#external_hwaddr=`ifconfig $external_intf | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` + +save_nic_cfg $external_intf $external_ip $external_netmask $external_hwaddr + +save_gateway + +SOURCE=/tmp/source +mkdir -p /root/.ssh +chmod 700 /root/.ssh +cat ${SOURCE}/bootstrap/boot.rsa.pub >> /root/.ssh/authorized_keys + +%end + +%packages --nobase +@core +%end |