Age | Commit message (Collapse) | Author | Files | Lines |
|
Sleeping for 10s and hoping that VPP service will be ready to accept
vppctl commands does not work all the times. Instead of increasing the
sleep time, poll every second until "vppctl show int" returns something.
Wait at most 30 seconds.
By the way, exit with a clear error message if "vppctl show int" does
not report two network interfaces as expected.
Change-Id: I6f0f053378c0bee8fd28a231dc1041c94642f5b3
Signed-off-by: Gwenael Lambrouin <gwenael.lambrouin@orange.com>
|
|
By default, configure the MTU of the management interface to the
conservative value of 1500: this will reduce the risk to get an
unmanageable VM. Else the MTU we will get will depend on the IaaS setup
and it could be high. And this will lead to troubles when we try to
manage the VM from a machine configured with a high MTU and when the
network path contains a link with a low MTU. This can typically happen
when we try to manage the VM from another VM in the same IaaS and when
the management traffic has to go outside the IaaS.
To set the MTU to a different value, configure the INTF_MGMT_MTU
variable in /etc/nfvbenchvm.conf. If INTF_MGMT_MTU is set to the
special value "auto", the MTU will not be configured and it will keep
the value set by the hypervisor ("legacy" nfvbenchvm behavior). If
INTF_MGMT_MTU is unset, the MTU will be set to 1500. In other cases,
the MTU will be set to the value of INTF_MGMT_MTU.
Change-Id: I5816113bbacec5fcdcc9672e20d8a4e2ac0c599a
Signed-off-by: Gwenael Lambrouin <gwenael.lambrouin@orange.com>
|
|
Change-Id: Ic9be998451dceb314b2fc46e936604402a27e925
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
Change-Id: Ia741847f886a291f0b0d7276e36d5c18f7819185
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
Change-Id: I6e55b4c0ad41d773b5303b8dc8c09cee8482c646
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
Change-Id: I0715b46b34b382176f2e06798deeede402b4c2fd
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
inside VM)
Change-Id: Id919a1b9dbf5e04b198d022432ed5c64232a27ba
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
loop VM
Change-Id: Ifd3f183345e21c7866e9e9898c7bbda601793b2c
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
Change-Id: Ia66553c5dbc9e800bf35c413f6448e394bf53b62
Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
|
|
Change-Id: Ia6bc2b1f97ecdf1d94206f9cda46e62910eb6546
Signed-off-by: ahothan <ahothan@cisco.com>
|
|
Enhance test VM to support auto-selection of PCI addresses based on MAC address
Enhance syslog reporting in test VM
Increase test VM version to 0.7
Add new properties to cfg.defaults.yaml to support idle interfaces
Enhance cleanup to support idle networks and ports
Change-Id: Ia89a2a1bee9eb5fb56f7adde074bdcec09cb0a3f
Signed-off-by: ahothan <ahothan@cisco.com>
|
|
1. Update kernel to 4.4.118-1.el7.elrepo.x86_64;
2. Update to build testpmd off DPDK 18.02;
3. Update txd/rxd of testpmd to 256/1024;
4. Update VPP to 17.10-9~gd594711~b55.x86_64;
Change-Id: I1321b306143d1daf81f8a984ad7739a980c5cfb9
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
Change-Id: I7a2e000e80ea624b279b9d0aa99a21c3f33c989d
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
1. Add support to use vswitch to handle V2V in PVVP SRIOV scenario
2. Update nfvbenchvm to 0.5:
(1) Update VPP to 17.10;
(2) Update DPDK testpmd to 17.08;
(3) Change kernel to based on longterm lineup;
Change-Id: I944489579a4cd92d17075e80870bbdb32512a150
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
1. Update testpmd to DPDK 17.05.2;
2. Update VPP to 17.07-30;
3. Fix the script to use the new kernel;
buildvm
Change-Id: Icd62ff1c383598db4f80bc9b36794ff0f8d0e56c
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
Change-Id: I9632333777260468d6f07cf0149c789626f20145
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|