aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user
diff options
context:
space:
mode:
authorLouin Pierrick <pierrick.louin@orange.com>2019-10-15 15:42:14 +0200
committerfmenguy <francoisregis.menguy@orange.com>2019-10-23 17:46:46 +0200
commit96ad348806948805928bf60885ca8f45379736ef (patch)
tree2c0f8757d54bab3f693b2ef94e14a8dc554ae346 /docs/testing/user
parent6d7174208a032de47495e3e687ba25aed8bedb6e (diff)
NFVBENCH-152 Add service_mode method for debugging purpose
Change-Id: I17b70a26ea0df1b5b616db6039813c83a1efe799 Signed-off-by: fmenguy <francoisregis.menguy@orange.com>
Diffstat (limited to 'docs/testing/user')
-rw-r--r--docs/testing/user/userguide/advanced.rst76
1 files changed, 76 insertions, 0 deletions
diff --git a/docs/testing/user/userguide/advanced.rst b/docs/testing/user/userguide/advanced.rst
index e49cfab..b36f01e 100644
--- a/docs/testing/user/userguide/advanced.rst
+++ b/docs/testing/user/userguide/advanced.rst
@@ -350,3 +350,79 @@ Example of run:
#
The --force-cleanup option will do the same but without prompting for confirmation.
+
+Service mode for TRex
+---------------------
+
+The ``--service-mode`` option allows you to capture traffic on a TRex window during the NFVBench test. Thus, you will be
+able to capture packets generated by TRex to observe many information on it.
+
+Example of use :
+
+.. code-block:: bash
+
+ nfvbench ``--service-mode``
+
+.. note:: It is preferable to define the minimum rate (2002 pps) to have a better capture
+
+In another bash window, you should connect to the TRex console doing :
+
+.. code-block:: bash
+
+ cd /opt/trex/vX.XX/ #use completion here to find your corresponding TRex version
+ ./trex-console -r
+ capture start monitor --rx [port number] -v
+
+Start this capture once you have started the NFVBench test, and you will observe packets on the TRex console :
+
+.. code-block:: bash
+
+ #26342 Port: 0 ◀── RX
+
+ trex(read-only)>
+
+ Type: UDP, Size: 66 B, TS: 26.30 [sec]
+
+ trex(read-only)>
+ ###[ Ethernet ]###
+ dst = a0:36:9f:7a:58:8e
+ src = fa:16:3e:57:8f:df
+ type = 0x8100
+ ###[ 802.1Q ]###
+ prio = 0
+ id = 0
+ vlan = 1093
+ type = 0x800
+ ###[ IP ]###
+ version = 4
+ ihl = 5
+ tos = 0x1
+ len = 46
+ id = 65535
+ flags =
+ frag = 0
+ ttl = 63
+ proto = udp
+ chksum = 0x8425
+ src = 120.0.0.0
+ dst = 110.0.17.153
+ \options \
+ ###[ UDP ]###
+ sport = 53
+ dport = 53
+ len = 26
+ chksum = 0xfd83
+ ###[ Raw ]###
+ load = "xx\xab'\x01\x00?s\x00\x00\xbci\xf0_{U~\x00"
+ ###[ Padding ]###
+ load = '6\x85'
+
+Check on the NFVBench window that the following log appears just before the testing phase :
+
+.. code-block:: bash
+
+ 2019-10-21 09:38:51,532 INFO Starting to generate traffic...
+ 2019-10-21 09:38:51,532 INFO Running traffic generator
+ 2019-10-21 09:38:51,541 INFO ``Service mode is enabled``
+ 2019-10-21 09:38:52,552 INFO TX: 2004; RX: 2003; Est. Dropped: 1; Est. Drop rate: 0.0499%
+ 2019-10-21 09:38:53,559 INFO TX: 4013; RX: 4011; Est. Dropped: 2; Est. Drop rate: 0.0498% \ No newline at end of file