summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/requirements/glossary.rst81
-rw-r--r--docs/requirements/index.rst54
-rw-r--r--docs/requirements/introduction.rst106
-rw-r--r--docs/requirements/references.rst18
-rw-r--r--docs/requirements/summary.rst46
-rw-r--r--docs/requirements/use_cases.rst14
-rw-r--r--docs/requirements/use_cases/georedundancy.rst72
-rw-r--r--docs/requirements/use_cases/georedundancy_cells.rst61
-rw-r--r--docs/requirements/use_cases/georedundancy_regions_insances.rst54
-rw-r--r--docs/requirements/use_cases/l3vpn.rst29
-rw-r--r--docs/requirements/use_cases/l3vpn_any_to_any.rst183
-rw-r--r--docs/requirements/use_cases/l3vpn_ecmp.rst175
-rw-r--r--docs/requirements/use_cases/l3vpn_hub_and_spoke.rst254
-rw-r--r--docs/requirements/use_cases/multiple_backends.rst137
-rw-r--r--docs/requirements/use_cases/programmable_provisioning.rst52
-rw-r--r--docs/requirements/use_cases/service_binding_pattern.rst198
16 files changed, 1534 insertions, 0 deletions
diff --git a/docs/requirements/glossary.rst b/docs/requirements/glossary.rst
new file mode 100644
index 0000000..fb7f7e7
--- /dev/null
+++ b/docs/requirements/glossary.rst
@@ -0,0 +1,81 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+**Definition of terms**
+
+Different standards developing organizations and communities use different
+terminology related to Network Function Virtualization, Cloud Computing, and
+Software Defined Networking. This list defines the terminology in the contexts
+of this document.
+
+
+.. glossary::
+
+ API
+ Application Programming Interface.
+
+ Cloud Computing
+ A model that enables access to a shared pool of configurable computing
+ resources, such as networks, servers, storage, applications, and
+ services, that can be rapidly provisioned and released with minimal
+ management effort or service provider interaction.
+
+ Edge Computing
+ Edge computing pushes applications, data and computing power (services)
+ away from centralized points to the logical extremes of a network.
+
+ Instance
+ Refers in OpenStack terminology to a running VM, or a VM in a known
+ state such as suspended, that can be used like a hardware server.
+
+ NFV
+ Network Function Virtualization.
+
+ NFVI
+ Network Function Virtualization Infrastructure. Totality of all hardware
+ and software components which build up the environment in which VNFs are
+ deployed.
+
+ SDN
+ Software-Defined Networking. Emerging architecture that decouples the
+ network control and forwarding functions, enabling the network control
+ to become directly programmable and the underlying infrastructure to be
+ abstracted for applications and network services.
+
+ Server
+ Computer that provides explicit services to the client software running
+ on that system, often managing a variety of computer operations. In
+ OpenStack terminology, a server is a VM instance.
+
+ vForwarder
+ vForwarder is used as generic and vendor neutral term for a software
+ packet forwarder. Concrete examples includes OpenContrail vRouter,
+ OpenvSwitch, Cisco VTF.
+
+ VIM
+ Virtualized Infrastructure Manager. Functional block that is responsible
+ for controlling and managing the NFVI compute, storage and network
+ resources, usually within one operator's Infrastructure Domain, e.g.
+ NFVI Point of Presence (NFVI-PoP).
+
+ Virtual network
+ Virtual network routes information among the network interfaces of VM
+ instances and physical network interfaces, providing the necessary
+ connectivity.
+
+ VM
+ Virtual Machine. Virtualized computation environment that behaves like a
+ physical computer/server by modeling the computing architecture of a
+ real or hypothetical computer.
+
+ VNF
+ Virtualized Network Function. Implementation of an Network Function
+ that can be deployed on a Network Function Virtualization
+ Infrastructure (NFVI).
+
+ VNFC
+ Virtualized Network Function Component. A VNF may be composed of
+ multiple components, jointly providing the functionality of the VNF.
+
+ WAN
+ Wide Area Network.
diff --git a/docs/requirements/index.rst b/docs/requirements/index.rst
new file mode 100644
index 0000000..a72ad99
--- /dev/null
+++ b/docs/requirements/index.rst
@@ -0,0 +1,54 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+***************************
+NetReady: Network Readiness
+***************************
+
+:Project: NetReady, https://wiki.opnfv.org/display/netready/NetReady
+:Editors: Georg Kunz (Ericsson)
+:Authors: Bin Hu (AT&T), Gergely Csatari (Nokia), Georg Kunz (Ericsson) and
+ others
+
+:Abstract: OPNFV provides an infrastructure with different SDN controller
+ options to realize NFV functionality on the platform it builds. As
+ OPNFV uses OpenStack as a VIM, we need to analyze the capabilities
+ this component offers us. The networking functionality is provided
+ by a component called Neutron, which provides a pluggable
+ architecture and specific APIs for integrating different networking
+ backends, for instance SDN controllers. As NFV wasn't taken into
+ consideration at the time when Neutron was designed we are already
+ facing several bottlenecks and architectural shortcomings while
+ implementing NFV use cases.
+
+ The NetReady project aims at evolving OpenStack networking
+ step-by-step to find the most efficient way to fulfill the
+ requirements of the identified NFV use cases, taking into account the
+ NFV mindset and the capabilities of SDN controllers.
+
+:History:
+
+ ========== =====================================================
+ Date Description
+ ========== =====================================================
+ 22.03.2016 Project creation
+ 19.04.2016 Initial version of the deliverable uploaded to Gerrit
+ 22.07.2016 First version ready for sharing with the community
+ 22.09.2016 Version accompanying the OPNFV Colorado release
+ ========== =====================================================
+
+.. raw:: latex
+
+ \newpage
+
+.. include::
+ glossary.rst
+
+.. toctree::
+ :maxdepth: 4
+ :numbered:
+
+ introduction.rst
+ use_cases.rst
+ summary.rst
+ references.rst
diff --git a/docs/requirements/introduction.rst b/docs/requirements/introduction.rst
new file mode 100644
index 0000000..0593e07
--- /dev/null
+++ b/docs/requirements/introduction.rst
@@ -0,0 +1,106 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Introduction
+============
+
+This document represents and describes the results of the OPNFV NetReady
+(Network Readiness) project. Specifically, the document comprises a selection of
+NFV-related networking use cases and their networking requirements. For every
+use case, it furthermore presents a gap analysis of the aforementioned
+requirements with respect to the current OpenStack networking architecture.
+Finally it provides a description of potential solutions and improvements.
+
+
+Scope
+-----
+
+NetReady is a project within the OPNFV initiative. Its focus is on NFV (Network
+Function Virtualization) related networking use cases and their requirements on
+the underlying NFVI (Network Function Virtualization Infrastructure).
+
+The NetReady project addresses the OpenStack networking architecture,
+specifically OpenStack Neutron, from a NFV perspective. Its goal is to identify
+gaps in the current OpenStack networking architecture with respect to NFV
+requirements and to propose and evaluate improvements and potential complementary
+solutions.
+
+
+Problem Description
+-------------------
+
+Telco ecosystem's movement towards the cloud domain results in Network Function
+Virtualization that is discussed and specified in ETSI NFV. This movement opens
+up many green field areas which are full of potential growth in both business
+and technology. This new NFV domain brings new business opportunities and new
+market segments as well as emerging technologies that are exploratory and
+experimental in nature, especially in NFV networking.
+
+It is often stated that NFV imposes additional requirements on the networking
+architecture and feature set of the underlying NFVI beyond those of data center
+networking. For instance, the NFVI needs to establish and manage connectivity
+beyond the data center to the WAN (Wide Area Network). Moreover, NFV networking
+use cases often abstract from L2 connectivity and instead focus on L3-only
+connectivity. Hence, the NFVI networking architecture needs to be flexible
+enough to be able to meet the requirements of NFV-related use cases in addition
+to traditional data center networking.
+
+Traditionally, OpenStack networking, represented typically by the OpenStack
+Neutron project, targets virtualized data center networking. This comprises
+originally establishing and managing layer 2 network connectivity among VMs
+(Virtual Machines). Over the past releases of OpenStack, Neutron has grown to
+provide an extensive feature set, covering both L2 as well as L3 networking
+services such as virtual routers, NATing, VPNaaS and BGP VPNs.
+
+It is an ongoing debate how well the current OpenStack networking architecture
+can meet the additional requirements of NFV networking. Hence, a thorough
+analysis of NFV networking requirements and their relation to the OpenStack
+networking architecture is needed.
+
+Besides current additional use cases and requirements of NFV networking,
+more importantly, because of the **green field** nature of NFV, it is foreseen
+that there will be more and more new NFV networking use cases and services,
+which will bring new business, in near future. The challenges for telco ecosystem
+are to:
+
+- Quickly catch the new business opportunity;
+
+- Execute it in agile way so that we can accelerate the time-to-market and improve
+ the business agility in offering our customers with innovative NFV services.
+
+Therefore, it is critically important for telco ecosystem to quickly develop and deploy
+new NFV networking APIs on-demand based on market need.
+
+Goals
+-----
+
+The goals of the NetReady project and correspondingly this document are the
+following:
+
+- This document comprises a collection of relevant NFV networking use cases and
+ clearly describes their requirements on the NFVI. These requirements are
+ stated independently of a particular implementation, for instance OpenStack
+ Neutron. Instead, requirements are formulated in terms of APIs (Application
+ Programming Interfaces) and data models needed to realize a given NFV use
+ case.
+
+- The list of use cases is not considered to be all-encompassing but it
+ represents a carefully selected set of use cases that are considered to be
+ relevant at the time of writing. More use cases may be added over time. The
+ authors are very open to suggestions, reviews, clarifications, corrections
+ and feedback in general.
+
+- This document contains a thorough analysis of the gaps in the current
+ OpenStack networking architecture with respect to the requirements imposed
+ by the selected NFV use cases. To this end, we analyze existing functionality
+ in OpenStack networking.
+
+- Beyond current list of use cases and gap analysis in the document, more importantly,
+ it is the future of NFV networking that needs to be made easy to innovate, quick to
+ develop, and agile to deploy and operate. A model-driven, extensible framework
+ is expected to achieve agility for innovations in NFV networking.
+
+- This document will in future revisions describe the proposed improvements
+ and complementary solutions needed to enable OpenStack to fulfill the
+ identified NFV requirements.
+
diff --git a/docs/requirements/references.rst b/docs/requirements/references.rst
new file mode 100644
index 0000000..5f1f925
--- /dev/null
+++ b/docs/requirements/references.rst
@@ -0,0 +1,18 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+.. References
+.. ==========
+
+.. [BGPVPN] http://docs.openstack.org/developer/networking-bgpvpn/
+.. [MULTISITE] https://wiki.opnfv.org/display/multisite/Multisite
+.. [NETREADY] https://wiki.opnfv.org/display/netready/NetReady
+.. [NETREADY-JIRA] https://jira.opnfv.org/projects/NETREADY/issues/NETREADY-19?filter=allopenissues
+.. [NETWORKING-SFC] https://wiki.openstack.org/wiki/Neutron/ServiceInsertionAndChaining
+.. [NEUTRON-ROUTED-NETWORKS] https://specs.openstack.org/openstack/neutron-specs/specs/newton/routed-networks.html
+.. [OS-NETWORKING-GUIDE-ML2] http://docs.openstack.org/mitaka/networking-guide/config-ml2-plug-in.html
+.. [RFC4364] http://tools.ietf.org/html/rfc4364
+.. [RFC7432] https://tools.ietf.org/html/rfc7432
+.. [SELF] http://artifacts.opnfv.org/netready/docs/requirements/index.html
+.. [TRICIRCLE] https://wiki.openstack.org/wiki/Tricircle#Requirements
+.. [VLAN-AWARE-VMs] https://blueprints.launchpad.net/neutron/+spec/vlan-aware-vms
diff --git a/docs/requirements/summary.rst b/docs/requirements/summary.rst
new file mode 100644
index 0000000..2761a48
--- /dev/null
+++ b/docs/requirements/summary.rst
@@ -0,0 +1,46 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Summary and Conclusion
+======================
+
+This document presented the results of the OPNFV NetReady (Network Readiness)
+project ([NETREADY]_). It described a selection of NFV-related networking use
+cases and their corresponding networking requirements. Moreover, for every use
+case, it describes an associated gap analysis which analyses the aforementioned
+networking requirements with respect to the current OpenStack networking
+architecture.
+
+The contents of the current document are the selected use cases and their
+derived requirements and identified gaps for OPNFV C release.
+
+OPNFV NetReady is open to take any further use cases under analysis in later
+OPNFV releases. The project backlog ([NETREADY-JIRA]_) lists the use cases and
+topics planned to be developed in future releases of OPNFV.
+
+Based on the gap analyses, we draw the following conclusions:
+
+* Besides current requirements and gaps identified in support of NFV networking,
+ more and more new NFV networking services are to be innovated in the near future.
+ Those innovations will bring additional requirements, and more significant gaps
+ will be expected. On the other hand, NFV networking business requires it
+ to be made easy to innovate, quick to develop, and agile to deploy and operate.
+ Therefore, a model-driven, extensible framework is expected to support NFV
+ networking on-demand in order to accelerate time-to-market and achieve business
+ agility for innovations in NFV networking business.
+
+* Neutron networks are implicitly, because of their reliance on subnets, L2
+ domains. L2 network overlays are the only way to implement Neutron networks
+ because of their semantics. However, L2 networks are inefficient ways to
+ implement cloud networking, and while this is not necessarily a problem for
+ enterprise use cases with moderate traffic it can add expense to the
+ infrastructure of NFV cases where networking is heavily used and efficient use
+ of capacity is key.
+
+* In NFV environment it should be possible to execute network administrator tasks
+ without OpenStack administrator rights.
+
+* In a multi-site setup it should be possible to manage the connection between
+ the sites in a programmable way.
+
+The latest version of this document can be found at [SELF]_.
diff --git a/docs/requirements/use_cases.rst b/docs/requirements/use_cases.rst
new file mode 100644
index 0000000..d31bbd3
--- /dev/null
+++ b/docs/requirements/use_cases.rst
@@ -0,0 +1,14 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Use cases
+=========
+
+The following sections address networking use cases that have been identified to be relevant in the scope of NFV and NetReady.
+
+.. toctree::
+ use_cases/multiple_backends.rst
+ use_cases/l3vpn.rst
+ use_cases/service_binding_pattern.rst
+ use_cases/programmable_provisioning.rst
+ use_cases/georedundancy.rst
diff --git a/docs/requirements/use_cases/georedundancy.rst b/docs/requirements/use_cases/georedundancy.rst
new file mode 100644
index 0000000..35336bd
--- /dev/null
+++ b/docs/requirements/use_cases/georedundancy.rst
@@ -0,0 +1,72 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Georedundancy
+=============
+Georedundancy refers to a configuration which ensures the service continuity of
+the VNFs even if a whole datacenter fails.
+
+It is possible that the VNF application layer provides additional redundancy
+with VNF pooling on top of the georedundancy functionality described here.
+
+It is possible that either the VNFCs of a single VNF are spread across several
+datacenters (this case is covered by the OPNFV multi-site project [MULTISITE]_
+or different, redundant VNFs are started in different datacenters.
+
+When the different VNFs are started in different datacenters the redundancy
+can be achieved by redundant VNFs in a hot (spare VNF is running its
+configuration and internal state is synchronized to the active VNF),
+warm (spare VNF is running, its configuration is synchronized to the active VNF)
+or cold (spare VNF is not running, active VNFs configuration is stored in a
+persistent, central store and configured to the spare VNF during its activation)
+standby state in a different datacenter from where the active VNFs are running.
+The synchronization and data transfer can be handled by the application or by
+the infrastructure.
+
+In all of these georedundancy setups there is a need for a network connection
+between the datacenter running the active VNF and the datacenter running the
+spare VNF.
+
+In case of a distributed cloud it is possible that the georedundant cloud of an
+application is not predefined or changed and the change requires configuration
+in the underlay networks when the network operator uses network isolation.
+Isolation of the traffic between the datacenters might be needed due to the
+multi-tenant usage of NFVI/VIM or due to the IP pool management of the network
+operator.
+
+This set of georedundancy use cases is about enabling the possibility to select a
+datacenter as backup datacenter and build the connectivity between the NFVIs in
+the different datacenters in a programmable way.
+
+The focus of these uses cases is on the functionality of OpenStack. It is not
+considered how the provisioning of physical resources is handled by the SDN
+controllers to interconnect the two datacenters.
+
+As an example the following picture (:numref:`georedundancy-before`) shows a
+multi-cell cloud setup where the underlay network is not fully meshed.
+
+.. figure:: images/georedundancy-before.png
+ :name: georedundancy-before
+ :width: 50%
+
+Each datacenter (DC) is a separate OpenStack cell, region or instance. Let's
+assume that a new VNF is started in DC b with a Redundant VNF in DC d. In this
+case a direct underlay network connection is needed between DC b and DC d. The
+configuration of this connection should be programmable in both DC b and DC d.
+The result of the deployment is shown in the following figure
+(:numref:`georedundancy-after`):
+
+.. figure:: images/georedundancy-after.png
+ :name: georedundancy-after
+ :width: 50%
+
+.. toctree::
+ georedundancy_cells.rst
+ georedundancy_regions_insances.rst
+
+Conclusion
+----------
+ An API is needed what provides possibility to set up the local and remote
+ endpoints for the underlay network. This API present in the SDN solutions, but
+ OpenStack does not provide an abstracted API for this functionality to hide
+ the differences of the SDN solutions.
diff --git a/docs/requirements/use_cases/georedundancy_cells.rst b/docs/requirements/use_cases/georedundancy_cells.rst
new file mode 100644
index 0000000..e1673a6
--- /dev/null
+++ b/docs/requirements/use_cases/georedundancy_cells.rst
@@ -0,0 +1,61 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Connection between different OpenStack cells
+--------------------------------------------
+Description
+~~~~~~~~~~~
+There should be an API to manage the infrastructure networks between two
+OpenStack cells. (Note: In the Mitaka release of OpenStack cells v1 are
+considered as experimental, while cells v2 functionality is under
+implementation). Cells are considered to be problematic from maintainability
+perspective as the sub-cells are using only the internal message bus and there
+is no API (and CLI) to do maintenance actions in case of a network connectivity
+problem between the main cell and the sub cells.
+
+The following figure (:numref:`cells-architecture`) shows the architecture of
+the most relevant OpenStack components in multi cell OpenStack environment.
+
+.. figure:: images/cells-architecture.png
+ :name: cells-architecture
+ :width: 50%
+
+The functionality behind the API depends on the underlying network providers (SDN
+controllers) and the networking setup.
+(For example OpenDaylight has an API to add new BGP neighbor.)
+
+OpenStack Neutron should provide an abstracted API for this functionality what
+calls the underlying SDN controllers API.
+
+Derived Requirements
+~~~~~~~~~~~~~~~~~~~~~
+ - Possibility to define a remote and a local endpoint
+ - As in case of cells the nova-api service is shared. It should be possible
+ to identify the cell in the API calls
+
+Northbound API / Workflow
++++++++++++++++++++++++++
+ - An infrastructure network management API is needed
+ - API call to define the remote and local infrastructure endpoints
+ - When the endpoints are created neutron is configured to use the new network.
+
+Dependencies on compute services
+++++++++++++++++++++++++++++++++
+ None.
+
+Data model objects
+++++++++++++++++++
+ - local and remote endpoint objects (Most probably IP addresses with some
+ additional properties).
+
+Current implementation
+~~~~~~~~~~~~~~~~~~~~~~
+ Current OpenStack implementation provides no way to set up the underlay
+ network connection.
+ OpenStack Tricircle project [TRICIRCLE]_
+ has plans to build up inter datacenter L2 and L3 networks.
+
+Gaps in the current solution
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ An infrastructure management API is missing from Neutron where the local and
+ remote endpoints of the underlay network could be configured.
diff --git a/docs/requirements/use_cases/georedundancy_regions_insances.rst b/docs/requirements/use_cases/georedundancy_regions_insances.rst
new file mode 100644
index 0000000..e3faf2d
--- /dev/null
+++ b/docs/requirements/use_cases/georedundancy_regions_insances.rst
@@ -0,0 +1,54 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Connection between different OpenStack regions or cloud instances
+-----------------------------------------------------------------
+
+Description
+~~~~~~~~~~~
+There should be an API to manage the infrastructure networks between two
+OpenStack regions or instances.
+
+The following figure (:numref:`instances-architecture`) shows the architecture
+of the most relevant OpenStack components in multi instance OpenStack
+environment.
+
+.. figure:: images/instances-architecture.png
+ :name: instances-architecture
+ :width: 50%
+
+The functionality behind the API depends on the underlying network providers (SDN
+controllers) and the networking setup.
+(For example OpenDaylight has an API to add new BGP neighbor.)
+
+OpenStack Neutron should provide an abstracted API for this functionality what
+calls the underlying SDN controllers API.
+
+Derived Requirements
+~~~~~~~~~~~~~~~~~~~~~
+- Possibility to define a remote and a local endpoint
+- As in case of cells the nova-api service is shared. It should be possible
+ to identify the cell in the API calls
+
+Northbound API / Workflow
++++++++++++++++++++++++++
+- An infrastructure network management API is needed
+- API call to define the remote and local infrastructure endpoints
+- When the endpoints are created Neutron is configured to use the new network.
+
+Data model objects
+++++++++++++++++++
+- local and remote endpoint objects (Most probably IP addresses with some
+additional properties).
+
+Current implementation
+~~~~~~~~~~~~~~~~~~~~~~
+ Current OpenStack implementation provides no way to set up the underlay
+ network connection.
+ OpenStack Tricircle project [TRICIRCLE]_
+ has plans to build up inter datacenter L2 and L3 networks.
+
+Gaps in the current solution
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ An infrastructure management API is missing from Neutron where the local and
+ remote endpoints of the underlay network could be configured.
diff --git a/docs/requirements/use_cases/l3vpn.rst b/docs/requirements/use_cases/l3vpn.rst
new file mode 100644
index 0000000..c2da424
--- /dev/null
+++ b/docs/requirements/use_cases/l3vpn.rst
@@ -0,0 +1,29 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu
+
+L3VPN Use Cases
+===============
+
+.. toctree::
+ l3vpn_any_to_any.rst
+ l3vpn_ecmp.rst
+ l3vpn_hub_and_spoke.rst
+
+
+Conclusion
+----------
+
+Based on the gap analyses of the three specific L3VPN use cases we conclude that
+there are gaps in both the functionality provided by the BGPVPN project as well
+as the support for multiple backends in Neutron.
+
+Some of the identified gaps [L3VPN-ECMP-GAP1, L3VPN-ECMP-GAP2, L3VPN-HS-GAP3]
+in the BGPVPN project are merely missing functionality which can be integrated
+in the existing OpenStack networking architecture.
+
+Other gaps, such as the inability to explicitly disable the layer 2 semantics of
+Neutron networks [L3VPN-HS-GAP1] or the tight integration of ports and networks
+[L3VPN-HS-GAP2] hinder a clean integration of the needed functionality. In order
+to close these gaps, fundamental changes in Neutron or alternative approaches
+need to be investigated.
diff --git a/docs/requirements/use_cases/l3vpn_any_to_any.rst b/docs/requirements/use_cases/l3vpn_any_to_any.rst
new file mode 100644
index 0000000..574eac6
--- /dev/null
+++ b/docs/requirements/use_cases/l3vpn_any_to_any.rst
@@ -0,0 +1,183 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu
+
+L3VPNs are virtual layer 3 networks described in multiple standards and RFCs,
+such as [RFC4364]_ and [RFC7432]_. Connectivity as well as traffic separation is
+achieved by exchanging routes between VRFs (Virtual Routing and Forwarding).
+
+Moreover, a Service Providers' virtualized network infrastructure may consist of
+one or more SDN Controllers from different vendors. Those SDN Controllers may be
+managed within one cloud or multiple clouds. Jointly, those VIMs (e.g. OpenStack
+instances) and SDN Controllers work together in an interoperable framework to
+create L3 services in the Service Providers' virtualized network infrastructure.
+
+While interoperability between SDN controllers and the corresponding data planes
+is ensured based on standardized protocols (e.g., [RFC4364]_ and [RFC7432]_),
+the integration and management of different SDN domains from the VIM is not
+clearly defined. Hence, this section analyses three L3VPN use cases involving
+multiple SDN Controllers.
+
+
+
+Any-to-Any Base Case
+--------------------
+
+Description
+~~~~~~~~~~~
+
+This any-to-any use case is the base scenario, providing layer 3 connectivity
+between VNFs in the same L3VPN while separating the traffic and IP address
+spaces of different L3VPNs belonging to different tenants.
+
+There are 2 hosts (compute nodes). SDN Controller A and vForwarder A are
+provided by Vendor A and run on host A. SDN Controller B and vForwarder B
+are provided by Vendor B, and run on host B.
+
+There are 2 tenants. Tenant 1 creates L3VPN Blue with 2 subnets: 10.1.1.0/24 and
+10.3.7.0/24. Tenant 2 creates L3VPN Red with 1 subnet and an overlapping
+address space: 10.1.1.0/24. The network topology is shown in
+:numref:`l3vpn-any2any-figure`.
+
+.. figure:: images/l3vpn-any2any.png
+ :name: l3vpn-any2any-figure
+ :width: 100%
+
+In L3VPN Blue, VMs G1 (10.1.1.5) and G2 (10.3.7.9) are spawned on host A, and
+attached to 2 subnets (10.1.1.0/24 and 10.3.7.0/24) and assigned IP addresses
+respectively. VMs G3 (10.1.1.6) and G4 (10.3.7.10) are spawned on host B, and
+attached to 2 subnets (10.1.1.0/24 and 10.3.7.0/24) and assigned IP addresses
+respectively.
+
+In L3VPN Red, VM G5 (10.1.1.5) is spawned on host A, and attached to subnet
+10.1.1.0/24. VM G6 (10.1.1.6) is spawned on host B, and attached to the same
+subnet 10.1.1.0/24.
+
+
+
+Derived Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+Northbound API / Workflow
++++++++++++++++++++++++++
+
+.. **Georg: this section needs to be made more readable**
+
+An example of the desired workflow is as follows:
+
+1. Create Network
+
+2. Create Network VRF Policy Resource ``Any-to-Any``
+
+ 2.1. This policy causes the following configuration when a VM of this tenant is spawned on a host:
+
+ 2.1.1. There will be a RD assigned per VRF
+
+ 2.1.2. There will be a RT used for the common any-to-any communication
+
+3. Create Subnet
+
+4. Create Port (subnet, network VRF policy resource). This causes the controller to:
+
+ 4.1. Create a VRF in vForwarder's FIB, or update VRF if it already exists
+
+ 4.2. Install an entry for the guest's host route in FIBs of the vForwarder serving this tenant's virtual network
+
+ 4.3. Announce guest host route to WAN-GW via MP-BGP
+
+
+
+
+Current implementation
+~~~~~~~~~~~~~~~~~~~~~~
+
+Support for creating and managing L3VPNs is available in OpenStack Neutron by
+means of the [BGPVPN]_ project. In order to create the L3VPN network
+configuration described above using the API [BGPVPN]_ API, the following workflow
+is needed:
+
+1. Create Neutron networks for tenant "Blue"
+
+ ``neutron net-create --tenant-id Blue net1``
+
+ ``neutron net-create --tenant-id Blue net2``
+
+
+2. Create subnets for the Neutron networks for tenant "Blue"
+
+ ``neutron subnet-create --tenant-id Blue --name subnet1 net1 10.1.1.0/24``
+
+ ``neutron subnet-create --tenant-id Blue --name subnet2 net2 10.3.7.0/24``
+
+
+3. Create Neutron ports in the corresponding networks for tenant "Blue"
+
+ ``neutron port-create --tenant-id Blue --name G1 --fixed-ip subnet_id=subnet1,ip_address=10.1.1.5 net1``
+
+ ``neutron port-create --tenant-id Blue --name G2 --fixed-ip subnet_id=subnet1,ip_address=10.1.1.6 net1``
+
+ ``neutron port-create --tenant-id Blue --name G3 --fixed-ip subnet_id=subnet2,ip_address=10.3.7.9 net2``
+
+ ``neutron port-create --tenant-id Blue --name G4 --fixed-ip subnet_id=subnet2,ip_address=10.3.7.10 net2``
+
+
+4. Create Neutron network for tenant "Red"
+
+ ``neutron net-create --tenant-id Red net3``
+
+
+5. Create subnet for the Neutron network of tenant "Red"
+
+ ``neutron subnet-create --tenant-id Red --name subnet3 net3 10.1.1.0/24``
+
+
+6. Create Neutron ports in the networks of tenant "Red"
+
+ ``neutron port-create --tenant-id Red --name G5 --fixed-ip subnet_id=subnet3,ip_address=10.1.1.5 net3``
+
+ ``neutron port-create --tenant-id Red --name G7 --fixed-ip subnet_id=subnet3,ip_address=10.1.1.6 net3``
+
+
+7. Create a L3VPN by means of the BGPVPN API for tenant "Blue"
+
+ ``neutron bgpvpn-create --tenant-id Blue --route-targets AS:100 --name vpn1``
+
+
+8. Associate the L3VPN of tenant "Blue" with the previously created networks
+
+ ``neutron bgpvpn-net-assoc-create --tenant-id Blue --network net1 --name vpn1``
+
+ ``neutron bgpvpn-net-assoc-create --tenant-id Blue --network net2 --name vpn1``
+
+
+9. Create a L3VPN by means of the BGPVPN API for tenant "Red"
+
+ ``neutron bgpvpn-create --tenant-id Red --route-targets AS:200 --name vpn2``
+
+
+10. Associate the L3VPN of tenant "Red" with the previously created networks
+
+ ``neutron bgpvpn-net-assoc-create --tenant-id Red --network net3 --name vpn2``
+
+
+Comments:
+
+* In this configuration only one BGPVPN for each tenant is created.
+
+* The ports are associated indirectly to the VPN through their networks.
+
+* The BGPVPN backend takes care of distributing the /32 routes to the vForwarder
+ instances and assigning appropriate RD values.
+
+
+
+Gaps in the current solution
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In terms of the functionality provided by the BGPVPN project, there are no gaps
+preventing this particular use case from a L3VPN perspective.
+
+However, in order to support the multi-vendor aspects of this use case, a better
+support for integrating multiple backends is needed (see previous use case).
+
+
diff --git a/docs/requirements/use_cases/l3vpn_ecmp.rst b/docs/requirements/use_cases/l3vpn_ecmp.rst
new file mode 100644
index 0000000..7bcb64f
--- /dev/null
+++ b/docs/requirements/use_cases/l3vpn_ecmp.rst
@@ -0,0 +1,175 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu
+
+L3VPN: ECMP Load Splitting Case (Anycast)
+-----------------------------------------
+
+Description
+~~~~~~~~~~~
+
+In this use case, multiple instances of a VNF are reachable through the same IP.
+The networking infrastructure is then responsible for spreading the network load
+across the VNF instances using Equal-Cost Multi-Path (ECMP) or perform a
+fail-over in case of a VNF failure.
+
+There are 2 hosts (compute nodes). SDN Controller A and vForwarder A are provided by
+Vendor A, and run on host A. SDN Controller B and vForwarder B are provided by
+Vendor B, and run on host B.
+
+There is one tenant. Tenant 1 creates L3VPN Blue with subnet 10.1.1.0/24.
+
+The network topology is shown in :numref:`l3vpn-ecmp-figure`:
+
+.. figure:: images/l3vpn-ecmp.png
+ :name: l3vpn-ecmp-figure
+ :width: 100%
+
+In L3VPN Blue, VNF1.1 and VNF1.2 are spawned on host A, attached to subnet 10.1.1.0/24
+and assigned the same IP address 10.1.1.5. VNF1.3 is spawned on host B, attached to
+subnet 10.1.1.0/24 and assigned the same IP addresses 10.1.1.5. VNF 2 and VNF 3 are spawned
+on host A and B respectively, attached to subnet 10.1.1.0/24, and assigned different IP
+addresses 10.1.1.6 and 10.1.1.3 respectively.
+
+Here, the Network VRF Policy Resource is ``ECMP/AnyCast``. Traffic to the
+anycast IP **10.1.1.5** can be load split from either WAN GW or another VM like
+G5.
+
+
+
+Current implementation
+~~~~~~~~~~~~~~~~~~~~~~
+
+Support for creating and managing L3VPNs is, in general, available in OpenStack
+Neutron by means of the BGPVPN project [BGPVPN]_. However, the BGPVPN project
+does not yet fully support ECMP as described in the following.
+
+There are (at least) two different approached to configuring ECMP:
+
+1. Using Neutron ports with identical IP addresses, or
+
+2. Using Neutron ports with unique IPs addresses and creating static routes to a
+ common IP prefix with next hops pointing to the unique IP addresses.
+
+
+
+Ports with identical IP addresses
++++++++++++++++++++++++++++++++++
+
+In this approach, multiple Neutron ports using the same IP address are created.
+In the current Neutron architecture, a port has to reside in a specific Neutron
+network. However, re-using the same IP address multiple times in a given Neutron
+network is not possible as this would create an IP collision. As a consequence,
+creating one Neutron network for each port is required.
+
+Given multiple Neutron networks, the BGPVPN API allows for associating those
+networks with the same VPN. It is then up to the networking backend to implement
+ECMP load balancing. This behavior and the corresponding API for configuring the
+behavior is currently not available. It is nevertheless on the road map of the
+BGPVPN project.
+
+.. **Georg: we could add an API usage example here similarly to the one below**
+
+
+Static Routes to ports with unique IP addresses
++++++++++++++++++++++++++++++++++++++++++++++++
+
+In this approach, Neutron ports are assigned unique IPs and static routes
+pointing to the same ECMP load-balanced prefix are created. The static routes
+define the unique Neutron port IPs as next-hop addresses.
+
+Currently, the API for static routes is not yet available in the BGPVPN project,
+but it is on the road map. The following work flow shows how to realize this
+particular use case under the assumption that support for static routes is
+available in the BGPVPN API.
+
+
+1. Create Neutron network for tenant "Blue"
+
+ ``neutron net-create --tenant-id Blue net1``
+
+
+2. Create subnet for the network of tenant "Blue"
+
+ ``neutron subnet-create --tenant-id Blue --name subnet1 net1 5.1.1.0/24``
+
+
+3. Create Neutron ports in the network of tenant "Blue"
+
+ ``neutron port-create --tenant-id Blue --name G1 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.1 net1``
+
+ ``neutron port-create --tenant-id Blue --name G2 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.2 net1``
+
+ ``neutron port-create --tenant-id Blue --name G3 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.3 net1``
+
+ ``neutron port-create --tenant-id Blue --name G4 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.4 net1``
+
+ ``neutron port-create --tenant-id Blue --name G5 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.5 net1``
+
+ ``neutron port-create --tenant-id Blue --name G6 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.6 net1``
+
+
+4. Create a L3VPN for tenant "Blue"
+
+ ``neutron bgpvpn-create --tenant-id Blue --route-target AS:100 vpn1``
+
+
+5. Associate the BGPVPN with the network of tenant "Blue"
+
+ ``neutron bgpvpn-network-associate --tenant-id Blue --network-id net1 vpn1``
+
+
+6. Create static routes which point to the same target
+
+ ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.1 vpn1``
+
+ ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.2 vpn1``
+
+ ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.3 vpn1``
+
+
+
+Gaps in the current solution
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Given the use case description and the currently available implementation in
+OpenStack provided by BGPVPN project, we identify the following gaps:
+
+* [L3VPN-ECMP-GAP1] Static routes are not yet supported by the BGPVPN project.
+
+ Currently, no API for configuring static routes is available in the BGPVPN
+ project. This feature is on the road map, however.
+
+
+* [L3VPN-ECMP-GAP2] Behavior not defined for multiple Neutron ports of the same
+ IP
+
+ The Neutron and BGPVPN API allow for creating multiple ports with the same
+ IP in different networks and associating the networks with the same VPN. The
+ exact behavior of this configuration is however not defined and an API for
+ configuring the behavior (load-balancing or fail-over) is missing. Development
+ of this feature is on the road map of the project, however.
+
+
+* [L3VPN-ECMP-GAP3] It is not possible to assign the same IP to multiple Neutron
+ ports within the same Neutron subnet.
+
+ This is due to the fundamental requirement of avoiding IP collisions within
+ the L2 domain which is a Neutron network.
+
+
+Conclusions
+~~~~~~~~~~~
+
+In the context of the ECMP use case, three gaps have been
+identified. Gap [L3VPN-ECMP-GAP1] and [L3VPN-ECMP-GAP2] are missing or undefined
+functionality in the BGPVPN project. There is no architectural hindrance
+preventing the implementation of the missing features in the BGPVPN project as
+well as in Neutron.
+
+The third gap [L3VPN-ECMP-GAP3] is based on the fact that Neutron ports always
+have to exist in a Neutron network. As a consequence, in order to create ports
+with the same IP, multiple networks must be used. This port-network binding
+will most likely not be relaxed in future releases of Neutron to retain backwards
+compatibility. A clean alternative to Neutron can instead provide more modeling
+flexibility.
diff --git a/docs/requirements/use_cases/l3vpn_hub_and_spoke.rst b/docs/requirements/use_cases/l3vpn_hub_and_spoke.rst
new file mode 100644
index 0000000..ca58f67
--- /dev/null
+++ b/docs/requirements/use_cases/l3vpn_hub_and_spoke.rst
@@ -0,0 +1,254 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu
+
+Hub and Spoke Case
+------------------
+
+Description
+~~~~~~~~~~~
+
+In a traditional Hub-and-spoke topology there are two types of network entities:
+a central hub and multiple spokes. The corresponding VRFs of the hub and the
+spokes are configured to import and export routes such that all traffic is
+directed through the hub. As a result, spokes cannot communicate with each other
+directly, but only indirectly via the central hub. Hence, the hub typically
+hosts central network functions such firewalls.
+
+Furthermore, there is no layer 2 connectivity between the VNFs.
+
+In addition, in this use case, the deployed network infrastructure comprises
+equipment from two different vendors, Vendor A and Vendor B. There are 2 hosts
+(compute nodes). SDN Controller A and vForwarder A are provided by Vendor A, and
+run on host A. SDN Controller B and vForwarder B are provided by Vendor B, and run
+on host B.
+
+There is 1 tenant. Tenant 1 creates L3VPN Blue with 2 subnets: 10.1.1.0/24 and 10.3.7.0/24.
+
+The network topology is shown in :numref:`l3vpn-hub-spoke-figure`:
+
+.. figure:: images/l3vpn-hub-spoke.png
+ :name: l3vpn-hub-spoke-figure
+ :width: 100%
+
+In L3VPN Blue, vFW(H) is acting the role of ``hub`` (a virtual firewall).
+The other 3 VNF VMs are ``spoke``. vFW(H) and VNF1(S) are spawned on host A,
+and VNF2(S) and VNF3(S) are spawned on host B. vFW(H) (10.1.1.5) and VNF2(S)
+(10.1.1.6) are attached to subnet 10.1.1.0/24. VNF1(S) (10.3.7.9) and VNF3(S)
+(10.3.7.10) are attached to subnet 10.3.7.0/24.
+
+
+Derived Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+Northbound API / Workflow
++++++++++++++++++++++++++
+
+Exemplary workflow is described as follows:
+
+1. Create Network
+
+2. Create VRF Policy Resource
+
+ 2.1. Hub and Spoke
+
+3. Create Subnet
+
+4. Create Port
+
+ 4.1. Subnet
+
+ 4.2. VRF Policy Resource, [H | S]
+
+
+
+Current implementation
+++++++++++++++++++++++
+
+Different APIs have been developed to support creating a L3 network topology and
+directing network traffic through specific network elements in specific order,
+for example, [BGPVPN]_ and [NETWORKING-SFC]_. We analyzed those APIs regarding
+the Hub-and-Spoke use case.
+
+
+BGPVPN
+''''''
+
+Support for creating and managing L3VPNs is in general available in OpenStack
+Neutron by means of the BGPVPN API [BGPVPN]_. The [BGPVPN]_ API currently
+supports the concepts of network- and router-associations. An association maps
+Neutron network objects (networks and routers) to a VRF with the following
+semantics:
+
+* A *network association* interconnects all subnets and ports of a Neutron
+ network by binding them to a given VRF
+* a *router association* interconnects all networks, and hence indirectly all
+ ports, connected to a Neutron router by binding them to a given VRF
+
+It is important to notice that these associations apply to entire Neutron
+networks including all ports connected to a network. This is due to the fact
+that in the Neutron, ports can only exist within a network but not individually.
+Furthermore, Neutron networks were originally designed to represent layer 2
+domains. As a result, ports within the same Neutron network typically have layer
+connectivity among each other. There are efforts to relax this original design
+assumption, e.g. routed networks, which however do not solve the problem at hand
+here (see the gap analysis further down below).
+
+In order to realize the hub-and-spoke topology outlined above, VRFs need to be
+created on a per port basis. Specifically, ports belonging to the same network
+should not be interconnected except through a corresponding configuration of a
+per-port-VRF. This configuration includes setting up next-hop routing table,
+labels, I-RT and E-RT etc. in order to enable traffic direction from hub to
+spokes.
+
+It may be argued that given the current network- and router-association mechanisms,
+the following workflow establishes a network topology which aims to achieve the desired
+traffic flow from Hub to Spokes. The basic idea is to model separate VRFs per VM
+by creating a dedicated Neutron network with two subnets for each VRF in the
+Hub-and-Spoke topology.
+
+1. Create Neutron network "hub"
+ ``neutron net-create --tenant-id Blue hub``
+
+
+2. Create a separate Neutron network for every "spoke"
+ ``neutron net-create --tenant-id Blue spoke-i``
+
+
+3. For every network (hub and spokes), create two subnets
+ ``neutron subnet-create <hub/spoke-i UUID> --tenant-id Blue 10.1.1.0/24``
+
+ ``neutron subnet-create <hub/spoke-i UUID> --tenant-id Blue 10.3.7.0/24``
+
+
+4. Create the Neutron ports in the corresponding networks
+ ``neutron port-create --tenant-id Blue --name vFW(H) --fixed-ip subnet_id=<hub UUID>,ip_address=10.1.1.5``
+
+ ``neutron port-create --tenant-id Blue --name VNF1(S) --fixed-ip subnet_id=<spoke-i UUID>,ip_address=10.3.7.9``
+
+ ``neutron port-create --tenant-id Blue --name VNF2(S) --fixed-ip subnet_id=<spoke-i UUID>,ip_address=10.1.1.6``
+
+ ``neutron port-create --tenant-id Blue --name VNF3(S) --fixed-ip subnet_id=<spoke-i UUID>,ip_address=10.3.7.10``
+
+
+5. Create a BGPVPN object (VRF) for the hub network with the corresponding import
+ and export targets
+ ``neutron bgpvpn-create --name hub-vrf --import-targets <RT-hub RT-spoke> --export-targets <RT-hub>``
+
+
+6. Create a BGPVPN object (VRF) for every spoke network with the corresponding import
+ and export targets
+ ``neutron bgpvpn-create --name spoke-i-vrf --import-targets <RT-hub> --export-targets <RT-spoke>``
+
+
+7. Associate the hub network with the hub VRF
+ ``bgpvpn-net-assoc-create hub --network <hub network-UUID>``
+
+
+8. Associate each spoke network with the corresponding spoke VRF
+ ``bgpvpn-net-assoc-create spoke-i --network <spoke-i network-UUID>``
+
+
+9. Add static route to direct all traffic to vFW VNF running at the hub.
+
+ **Note:** Support for static routes not yet available.
+
+ ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 0/0 --nexthop-ip 10.1.1.5 hub``
+
+After step 9, VMs can be booted with the corresponding ports.
+
+The resulting network topology intents to resemble the target topology as shown in
+:numref:`l3vpn-hub-spoke-figure`, and achieve the desired traffic direction from Hub to Spoke.
+However, it deviates significantly from the essence of the Hub-and-Spoke use case as
+described above in terms of desired network topology, i.e. one L3VPN with multiple
+VRFs associated with vFW(H) and other VNFs(S) separately. And this method of using
+the current network- and router-association mechanism is not scalable when there are large
+number of Spokes, and in case of scale-in and scale-out of Hub and Spokes.
+
+The gap analysis in the next section describes the technical reasons for this.
+
+
+Network SFC
+'''''''''''
+
+Support of Service Function Chaining is in general available in OpenStack Neutron through
+the Neutron API for Service Insertion and Chaining project [NETWORKING-SFC]_.
+However, the [NETWORKING-SFC]_ API is focused on creating service chaining through
+NSH at L2, although it intends to be agnostic of backend implementation. It is unclear whether
+or not the service chain from vFW(H) to VNFs(S) can be created in the way of L3VPN-based
+VRF policy approach using [NETWORKING-SFC]_ API.
+
+Hence, it is currently not possible to configure the networking use case as described above.
+
+.. **Georg: we need to look deeper into SFC to substantiate our claim here.**
+
+
+Gaps in the Current Solution
+++++++++++++++++++++++++++++
+
+Given the use case description and the currently available implementation in
+OpenStack provided by [BGPVPN]_ project and [NETWORKING-SFC]_ project,
+we identify the following gaps:
+
+
+[L3VPN-HS-GAP1] No means to disable layer 2 semantic of Neutron networks
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Neutron networks were originally designed to represent layer 2 broadcast
+domains. As such, all ports connected to a network are in principle
+inter-connected on layer 2 (not considering security rules here). In contrast,
+in order to realize L3VPN use cases such as the hub-and-spoke topology,
+connectivity among ports must be controllable on a per port basis on layer 3.
+
+There are ongoing efforts to relax this design assumption, for instance by means
+of routed networks ([NEUTRON-ROUTED-NETWORKS]_). In a routed network, a Neutron network
+is a layer 3 domain which is composed of multiple layer 2 segments. A routed
+network only provides layer 3 connectivity across segments, but layer 2
+connectivity across segments is **optional**. This means, depending on the
+particular networking backend and segmentation technique used, there might be
+layer 2 connectivity across segments or not. A new flag ``l2_adjacency``
+indicates whether or not a user can expect layer 2 connectivity or not across
+segments.
+
+This flag, however, is ready-only and cannot be used to overwrite or disable the
+layer 2 semantics of a Neutron network.
+
+
+[L3VPN-HS-GAP2] No port-association available in the BGPVPN project yet
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Due to gap [L3VPN-HS-GAP1], the [BGPVPN]_ project was not yet able to implement
+the concept of a port association. A port association would allow to associate
+individual ports with VRFs and thereby control layer 3 connectivity on a per
+port basis.
+
+The workflow described above intents to mimic port associations by means of
+separate Neutron networks. Hence, the resulting workflow is overly complicated
+and not intuitive by requiring to create additional Neutron entities (networks)
+which are not present in the target topology. Moreover, creating large numbers
+of Neutron networks limits scalability.
+
+Port associations are on the road map of the [BGPVPN]_ project, however, no
+design that overcomes the problems outlined above has been specified yet.
+Consequently, the time-line for this feature is unknown.
+
+As a result, creating a clean Hub-and-Spoke topology is current not yet
+supported by the [BGPVPN]_ API.
+
+
+[L3VPN-HS-GAP3] No support for static routes in the BGPVPN project yet
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+In order to realize the hub-and-spoke use case, a static route is needed to
+attract the traffic at the hub to the corresponding VNF (direct traffic to the
+firewall). Support for static routes in the BGPVPN project is available for the
+router association by means of the Neutron router extra routes feature. However,
+there is no support for static routes for network and port associations yet.
+
+Design work for supporting static routes for network associations has started,
+but no final design has been proposed yet.
+
+..
+.. [L3VPN-HS-GAP4] Creating a clean hub-and-spoke topology is current not yet supported by the NETWORKING-SFC API.
+.. [Georg: We need to look deeper into SFC before we can substantiate our claim]
+
diff --git a/docs/requirements/use_cases/multiple_backends.rst b/docs/requirements/use_cases/multiple_backends.rst
new file mode 100644
index 0000000..2aefe8a
--- /dev/null
+++ b/docs/requirements/use_cases/multiple_backends.rst
@@ -0,0 +1,137 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu
+
+
+Multiple Networking Backends
+----------------------------
+
+Description
+^^^^^^^^^^^
+
+Network Function Virtualization (NFV) brings the need of supporting multiple networking
+back-ends in virtualized infrastructure environments.
+
+First of all, a Service Providers' virtualized network infrastructure will consist of
+multiple SDN Controllers from different vendors for obvious business reasons.
+Those SDN Controllers may be managed within one cloud or multiple clouds.
+Jointly, those VIMs (e.g. OpenStack instances) and SDN Controllers need to work
+together in an interoperable framework to create NFV services in the Service
+Providers' virtualized network infrastructure. It is needed that one VIM (e.g. OpenStack
+instance) shall be able to support multiple SDN Controllers as back-end.
+
+Secondly, a Service Providers' virtualized network infrastructure will serve multiple,
+heterogeneous administrative domains, such as mobility domain, access networks,
+edge domain, core networks, WAN, enterprise domain, etc. The architecture of
+virtualized network infrastructure needs different types of SDN Controllers that are
+specialized and targeted for specific features and requirements of those different domains.
+The architectural design may also include global and local SDN Controllers.
+Importantly, multiple local SDN Controllers may be managed by one VIM (e.g.
+OpenStack instance).
+
+Furthermore, even within one administrative domain, NFV services could also be quite diversified.
+Specialized NFV services require specialized and dedicated SDN Controllers. Thus a Service
+Provider needs to use multiple APIs and back-ends simultaneously in order to provide
+users with diversified services at the same time. At the same time, for a particular NFV service,
+the new networking APIs need to be agnostic of the back-ends.
+
+
+
+Requirements
+^^^^^^^^^^^^
+
+Based on the use cases described above, we derive the following
+requirements.
+
+It is expected that in NFV networking service domain:
+
+* One OpenStack instance shall support multiple SDN Controllers simultaneously
+
+* New networking API shall be integrated flexibly and quickly
+
+* New NFV Networking APIs shall be agnostic of back-ends
+
+* Interoperability is needed among multi-vendor SDN Controllers at back-end
+
+
+
+Current Implementation
+^^^^^^^^^^^^^^^^^^^^^^
+
+In the current implementation of OpenStack networking, SDN controllers are
+hooked up to Neutron by means of dedicated plugins. A plugin translates
+requests coming in through the Neutron northbound API, e.g. the creation of a
+new network, into the appropriate northbound API calls of the corresponding SDN
+controller.
+
+There are multiple different plugin mechanisms currently available in Neutron,
+each targeting a different purpose. In general, there are `core plugins`,
+covering basic networking functionality and `service plugins`, providing layer 3
+connectivity and advanced networking services such as FWaaS or LBaaS.
+
+
+
+Core and ML2 Plugins
+''''''''''''''''''''
+
+The Neutron core plugins cover basic Neutron functionality, such as creating
+networks and ports. Every core plugin implements the functionality needed to
+cover the full range of the Neutron core API. A special instance of a core
+plugin is the ML2 core plugin, which in turn allows for using sub-drivers -
+separated again into type drivers (VLAN, VxLAN, GRE) or mechanism drivers (OVS,
+OpenDaylight, etc.). This allows to using dedicated sub-drivers for dedicated
+functionality.
+
+In practice, different SDN controllers use both plugin mechanisms to integrate
+with Neutron. For instance OpenDaylight uses a ML2 mechanism plugin driver
+whereas OpenContrail integrated by means of a full core plugin.
+
+In its current implementation, only one Neutron core plugin can be active at any
+given time. This means that if a SDN controller utilizes a dedicated core
+plugin, no other SDN controller can be used at the same time for the same type
+of service.
+
+In contrast, the ML2 plugin allows for using multiple mechanism drivers
+simultaneously. In principle, this enables a parallel deployment of multiple SDN
+controllers if and only if all SDN controllers integrate through a ML2 mechanism
+driver.
+
+
+
+Neutron Service Plugins
+'''''''''''''''''''''''
+
+Neutron service plugins target L3 services and advanced networking services,
+such as BGPVPN or LBaaS. Typically, a service itself provides a driver plugin
+mechanism which needs to be implemented for every SDN controller. As the
+architecture of the driver mechanism is up to the community developing the
+service plugin, it needs to be analyzed for every driver plugin mechanism
+individually if and how multiple back-ends are supported.
+
+
+
+Gaps in the current solution
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Given the use case description and the current implementation of OpenStack
+Neutron, we identify the following gaps:
+
+
+[MB-GAP1] Limited support for multiple back-ends
+'''''''''''''''''''''''''''''''''''''''''''''''
+
+As pointed out above, the Neutron core plugin mechanism only allows for one
+active plugin at a time. The ML2 plugin allows for running multiple mechanism
+drivers in parallel, however, successful inter-working strongly depends on the
+individual driver.
+
+Moreover, the ML2 plugin and its API is - by design - very layer 2 focused. For
+NFV networking use cases beyond layer 2, for instance L3VPNs, a more flexible
+API is required.
+
+
+Conclusion
+^^^^^^^^^^
+
+We conclude that a complementary method of integrating multiple SDN controllers
+into a single OpenStack deployment is needed to fulfill the needs of operators.
diff --git a/docs/requirements/use_cases/programmable_provisioning.rst b/docs/requirements/use_cases/programmable_provisioning.rst
new file mode 100644
index 0000000..963451d
--- /dev/null
+++ b/docs/requirements/use_cases/programmable_provisioning.rst
@@ -0,0 +1,52 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+Programmable Provisioning of Provider Networks
+----------------------------------------------
+Description
+~~~~~~~~~~~
+
+In a NFV environment the VNFMs (Virtual Network Function Manager) are consumers
+of the OpenStack IaaS API. They are often deployed without administrative rights
+on top of the NFVI platform. Furthermore, in the telco domain provider networks
+are often used. However, when a provider network is created administrative
+rights are needed what in the case of a VNFM without administrative rights
+requires additional manual configuration work. It shall be possible to
+configure provider networks without administrative rights. It should be
+possible to assign the capability to create provider networks to any roles.
+
+The following figure (:numref:`api-users`) shows the possible users of an
+OpenStack API and the relation of OpenStack and ETSI NFV components. Boxes with
+solid line are the ETSI NFV components while the boxes with broken line are the
+OpenStack components.
+
+.. figure:: images/api-users.png
+ :name: api-users
+ :width: 50%
+
+Derived Requirements
+~~~~~~~~~~~~~~~~~~~~~
+ - Authorize the possibility of provider network creation based on policy
+ - There should be a new entry in :code:`policy.json` which controls the provider network creation
+ - Default policy of this new entry should be :code:`rule:admin_or_owner`.
+ - This policy should be respected by the Neutron API
+
+Northbound API / Workflow
++++++++++++++++++++++++++
+ - No changes in the API
+
+Data model objects
+++++++++++++++++++
+ - No changes in the data model
+
+Current implementation
+~~~~~~~~~~~~~~~~~~~~~~
+Only admin users can manage provider networks [OS-NETWORKING-GUIDE-ML2]_.
+
+Potential implementation
+~~~~~~~~~~~~~~~~~~~~~~~~
+ - Policy engine shall be able to handle a new provider network creation and
+ modification related policy.
+ - When a provider network is created or modified neutron should check the
+ authority with the policy engine instead of requesting administrative
+ rights.
diff --git a/docs/requirements/use_cases/service_binding_pattern.rst b/docs/requirements/use_cases/service_binding_pattern.rst
new file mode 100644
index 0000000..f96e646
--- /dev/null
+++ b/docs/requirements/use_cases/service_binding_pattern.rst
@@ -0,0 +1,198 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Georg Kunz
+
+
+Service Binding Design Pattern
+------------------------------
+
+Description
+^^^^^^^^^^^
+
+This use case aims at binding multiple networks or network services to a single
+vNIC (port) of a given VM. There are several specific application scenarios for
+this use case:
+
+* Shared Service Functions: A service function connects to multiple networks of
+ a tenant by means of a single vNIC.
+
+ Typically, a vNIC is bound to a single network. Hence, in order to directly
+ connect a service function to multiple networks at the same time, multiple vNICs
+ are needed - each vNIC binds the service function to a separate network. For
+ service functions requiring connectivity to a large number of networks, this
+ approach does not scale as the number of vNICs per VM is limited and additional
+ vNICs occupy additional resources on the hypervisor.
+
+ A more scalable approach is to bind multiple networks to a single vNIC
+ and let the service function, which is now shared among multiple networks,
+ handle the separation of traffic itself.
+
+
+* Multiple network services: A service function connects to multiple different
+ network types such as a L2 network, a L3(-VPN) network, a SFC domain or
+ services such as DHCP, IPAM, firewall/security, etc.
+
+
+In order to achieve a flexible binding of multiple services to vNICs, a logical
+separation between a vNIC (instance port) - that is, the entity that is used by
+the compute service as hand-off point between the network and the VM - and a
+service interface - that is, the interface a service binds to - is needed.
+
+Furthermore, binding network services to service interfaces instead of to the
+vNIC directly enables a more dynamic management of the network connectivity of
+network functions as there is no need to add or remove vNICs.
+
+
+Requirements
+^^^^^^^^^^^^
+
+Data model
+""""""""""
+
+This section describes a general concept for a data model and a corresponding
+API. It is not intended that these entities are to be implemented exactly as
+described. Instead, they are meant to show a design pattern for future network
+service models and their corresponding APIs. For example, the "service" entity
+should hold all required attributes for a specific service, for instance a given
+L3VPN service. Hence, there would be no entity "service" but rather "L3VPN".
+
+
+* ``instance-port``
+
+ An instance port object represents a vNIC which is bindable to an OpenStack
+ instance by the compute service (Nova).
+
+ *Attributes:* Since an instance-port is a layer 2 device, its attributes
+ include the MAC address, MTU and others.
+
+
+* ``interface``
+
+ An interface object is a logical abstraction of an instance-port. It allows to
+ build hierarchies of interfaces by means of a reference to a parent interface.
+ Each interface represents a subset of the packets traversing a given port or
+ parent interface after applying a layer 2 segmentation mechanism specific to the
+ interface type.
+
+ *Attributes:* The attributes are specific to the type of interface.
+
+ *Examples:* trunk interface, VLAN interface, VxLAN interface, MPLS interface
+
+
+* ``service``
+
+ A service object represents a specific networking service.
+
+ *Attributes:* The attributes of the service objects are service specific and
+ valid for given service instance.
+
+ *Examples:* L2, L3VPN, SFC
+
+
+* ``service-port``
+
+ A service port object binds an interface to a service.
+
+ *Attributes:* The attributes of a service-port are specific for the bound
+ service.
+
+ *Examples:* port services (IPAM, DHCP, security), L2 interfaces, L3VPN
+ interfaces, SFC interfaces.
+
+
+
+Northbound API
+""""""""""""""
+
+An exemplary API for manipulating the data model is described below. As for the
+data model, this API is not intended to be a concrete API, but rather an example
+for a design pattern that clearly separates ports from services and service
+bindings.
+
+* ``instance-port-{create,delete} <name>``
+
+ Creates or deletes an instance port object that represents a vNIC in a VM.
+
+
+* ``interface-{create,delete} <name> [interface type specific parameters]``
+
+ Creates or deletes an interface object.
+
+
+* ``service-{create,delete} <name> [service specific parameters]``
+
+ Create a specific service object, for instance a L3VPN, a SFC domain, or a L2 network.
+
+
+* ``service-port-{create,delete} <service-id> <interface-id> [service specific parameters]``
+
+ Creates a service port object, thereby binding an interface to a given service.
+
+
+
+Orchestration
+"""""""""""""
+
+None.
+
+
+Dependencies on other resources
+"""""""""""""""""""""""""""""""
+
+The compute service needs to be able to consume instance ports instead of
+classic Neutron ports.
+
+
+Current Implementation
+^^^^^^^^^^^^^^^^^^^^^^
+
+The core Neutron API does not follow the service binding design pattern. For
+example, a port has to exist in a Neutron network - specifically it has to be
+created for a particular Neutron network. It is not possible to create just a
+port and assign it to a network later on as needed. As a result, a port cannot
+be moved from one network to another, for instance.
+
+Regarding the shared service function use case outlined above, there is an
+ongoing activity in Neutron [VLAN-AWARE-VMs]_. The solution proposed by this
+activity allows for creating a trunk-port and multiple sub-ports per Neutron
+port which can be bound to multiple networks (one network per sub-port). This
+allows for binding a single VNIC to multiple networks and allow the
+corresponding VMs to handle the network segmentation (VLAN tagged traffic)
+itself. While this is a step in the direction of binding multiple services
+(networks) to a port, it is limited by the fundamental assumption of Neutron
+that a port has to exist on a given network.
+
+There are extensions of Neutron that follow the service binding design pattern
+more closely. An example is the BGPVPN project. A rough mapping of the service
+binding design pattern to the data model of the BGPVPN project is as follows:
+
+* instance-port -> Neutron port
+
+* service -> VPN
+
+* service-port -> network association
+
+This example shows that extensions of Neutron can in fact follow the described
+design pattern in their respective data model and APIs.
+
+
+
+Conclusions
+^^^^^^^^^^^
+
+In conclusion, the design decisions taken for the core Neutron API and data
+model do not follow the service binding model. As a result, it is hard to
+implement certain use cases which rely on a flexible binding of services to
+ports. Due to the backwards compatibility to the large amount of existing
+Neutron code, it is unlikely that the core Neutron API will adapt to this design
+pattern.
+
+New extension to Neutron however are relatively free to choose their data model
+and API - within the architectural boundaries of Neutron of course. In order to
+provide the flexibility needed, extensions shall aim for following the service
+binding design pattern if possible.
+
+For the same reason, new networking frameworks complementing Neutron, such as
+Gluon, shall follow this design pattern and create the foundation for
+implementing networking services accordingly.
+