diff options
| -rw-r--r-- | tests/utils/devstack/local.conf | 102 | ||||
| -rw-r--r-- | tests/utils/tacker-setup.sh | 238 | ||||
| -rw-r--r-- | tests/vHello_Tacker.sh | 118 |
3 files changed, 317 insertions, 141 deletions
diff --git a/tests/utils/devstack/local.conf b/tests/utils/devstack/local.conf new file mode 100644 index 0000000..2b29ca8 --- /dev/null +++ b/tests/utils/devstack/local.conf @@ -0,0 +1,102 @@ +[[local|localrc]] +# Use eth1 for stacking (host-only network) +HOST_IP_IFACE=ens3 + +# While ``stack.sh`` is happy to run without ``localrc``, devlife is better when +# there are a few minimal variables set: + +# If the ``*_PASSWORD`` variables are not set here you will be prompted to enter +# values for them by ``stack.sh``and they will be added to ``local.conf``. +ADMIN_PASSWORD=opnfv +DATABASE_PASSWORD=opnfvdb +RABBIT_PASSWORD=hopper +SERVICE_PASSWORD=$ADMIN_PASSWORD + +# ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if +# the NIC configuration of the host is unusual, i.e. ``eth1`` has the default +# route but ``eth0`` is the public interface. They are auto-detected in +# ``stack.sh`` but often is indeterminate on later runs due to the IP moving +# from an Ethernet interface to a bridge on the host. Setting it here also +# makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``. +# Neither is set by default. +#HOST_IP=w.x.y.z +#HOST_IPV6=2001:db8::7 + +# By default stack.sh only installs Python packages if no version is currently +# installed or the current version does not match a specified requirement. +# If PIP_UPGRADE is set to True then existing required Python packages will +# be upgraded to the most recent version that matches requirements. +PIP_UGRADE=True + +# Logging +# ------- + +# By default ``stack.sh`` output only goes to the terminal where it runs. It can +# be configured to additionally log to a file by setting ``LOGFILE`` to the full +# path of the destination log file. A timestamp will be appended to the given name. +LOGFILE=$DEST/logs/stack.sh.log + +# Old log files are automatically removed after 7 days to keep things neat. Change +# the number of days by setting ``LOGDAYS``. +LOGDAYS=2 + +# Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting +# ``LOG_COLOR`` false. +#LOG_COLOR=False + + +# Using milestone-proposed branches +# --------------------------------- + +# Uncomment these to grab the milestone-proposed branches from the +# repos: +#CINDER_BRANCH=milestone-proposed +#GLANCE_BRANCH=milestone-proposed +#HORIZON_BRANCH=milestone-proposed +#KEYSTONE_BRANCH=milestone-proposed +#KEYSTONECLIENT_BRANCH=milestone-proposed +#NOVA_BRANCH=milestone-proposed +#NOVACLIENT_BRANCH=milestone-proposed +#NEUTRON_BRANCH=milestone-proposed +#SWIFT_BRANCH=milestone-proposed + +# Using git versions of clients +# ----------------------------- +# By default clients are installed from pip. See LIBS_FROM_GIT in +# stackrc for details on getting clients from specific branches or +# revisions. e.g. +# LIBS_FROM_GIT="python-ironicclient" +# IRONICCLIENT_BRANCH=refs/changes/44/2.../1 + +# Disable Identity API v2 +# The Identity API v2 is deprecated as of Mitaka and it is recommended to only use the v3 API. +# It is possible to setup keystone without v2 API, by doing: +#ENABLE_IDENTITY_V2=False -- this is causing an issue with Congress + +# Turn on Neutron +disable_service n-net +enable_service neutron +enable_service q-svc q-agt q-dhcp q-l3 q-meta +Q_ML2_PLUGIN_EXT_DRIVERS=port_security + +# Turn on Swift (Object Store) without replication +enable_service s-proxy s-object s-container s-account +SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5 +SWIFT_REPLICAS=1 +SWIFT_DATA_DIR=$DEST/data/swift + +# Since Newton release, Heat is available as a devstack plugin +enable_plugin heat https://git.openstack.org/openstack/heat stable/newton +# Download and register a VM image that Heat can launch +IMAGE_URL_SITE="https://cloud-images.ubuntu.com" +IMAGE_URL_PATH="/xenial/current/" +IMAGE_URL_FILE="xenial-server-cloudimg-amd64-disk1.img" +IMAGE_URLS+=","$IMAGE_URL_SITE$IMAGE_URL_PATH$IMAGE_URL_FILE + +#Enable Tacker +#enable_plugin tacker https://git.openstack.org/openstack/tacker stable/newton + +# Enable Congress +enable_plugin congress http://git.openstack.org/openstack/congress stable/newton +enable_plugin ceilometer http://git.openstack.org/openstack/ceilometer stable/newton + diff --git a/tests/utils/tacker-setup.sh b/tests/utils/tacker-setup.sh index 4935d93..da9e4a1 100644 --- a/tests/utils/tacker-setup.sh +++ b/tests/utils/tacker-setup.sh @@ -14,14 +14,13 @@ # limitations under the License. # # What this is: Setup script for the OpenStack Tacker VNF Manager starting from -# an Unbuntu Xenial docker container. +# an Unbuntu Xenial docker container. This script is intended to be in an +# OPNFV environment, or an plain OpenStack environment (e.g. Devstack). # # Status: this is a work in progress, under test. # # How to use: -# $ bash tacker-setup.sh [tacker-cli|tacker-api] [init|setup|clean] -# tacker-cli: use Tacker CLI -# tacker-api: use Tacker RESTful API +# $ bash tacker-setup.sh [init|setup|clean] # init: Initialize docker container # setup: Setup of Tacker in the docker container # clean: Clean @@ -52,54 +51,7 @@ function setenv () { chmod 755 /tmp/tacker/*.sh echo "$0: $(date) Setup admin-openrc.sh" - - if [ "$dist" == "Ubuntu" ]; then - echo "$0: $(date) Ubuntu-based install" - echo "$0: $(date) Create the environment file" - KEYSTONE_HOST=$(juju status --format=short | awk "/keystone\/0/ { print \$3 }") - cat <<EOF >/tmp/tacker/admin-openrc.sh -export CONGRESS_HOST=$(juju status --format=short | awk "/openstack-dashboard/ { print \$3 }") -export HORIZON_HOST=$(juju status --format=short | awk "/openstack-dashboard/ { print \$3 }") -export KEYSTONE_HOST=$KEYSTONE_HOST -export CEILOMETER_HOST=$(juju status --format=short | awk "/ceilometer\/0/ { print \$3 }") -export CINDER_HOST=$(juju status --format=short | awk "/cinder\/0/ { print \$3 }") -export GLANCE_HOST=$(juju status --format=short | awk "/glance\/0/ { print \$3 }") -export NEUTRON_HOST=$(juju status --format=short | awk "/neutron-api\/0/ { print \$3 }") -export NOVA_HOST=$(juju status --format=short | awk "/nova-cloud-controller\/0/ { print \$3 }") -export HEAT_HOST=$(juju status --format=short | awk "/heat\/0/ { print \$3 }") -export OS_USERNAME=admin -export OS_PASSWORD=openstack -export OS_TENANT_NAME=admin -export OS_AUTH_URL=http://$KEYSTONE_HOST:5000/v2.0 -export OS_REGION_NAME=RegionOne -EOF - else - # Centos - echo "$0: $(date) Centos-based install" - echo "$0: $(date) Setup undercloud environment so we can get overcloud Controller server address" - source ~/stackrc - echo "$0: $(date) Get address of Controller node" - export CONTROLLER_HOST1=$(openstack server list | awk "/overcloud-controller-0/ { print \$8 }" | sed 's/ctlplane=//g') - echo "$0: $(date) Create the environment file" - cat <<EOF >/tmp/tacker/admin-openrc.sh -export CONGRESS_HOST=$CONTROLLER_HOST1 -export KEYSTONE_HOST=$CONTROLLER_HOST1 -export CEILOMETER_HOST=$CONTROLLER_HOST1 -export CINDER_HOST=$CONTROLLER_HOST1 -export GLANCE_HOST=$CONTROLLER_HOST1 -export NEUTRON_HOST=$CONTROLLER_HOST1 -export NOVA_HOST=$CONTROLLER_HOST1 -export HEAT_HOST=$CONTROLLER_HOST1 -EOF - cat ~/overcloudrc >>/tmp/tacker/admin-openrc.sh - source ~/overcloudrc - export OS_REGION_NAME=$(openstack endpoint list | awk "/ nova / { print \$4 }") - # sed command below is a workaound for a bug - region shows up twice for some reason - cat <<EOF | sed '$d' >>/tmp/tacker/admin-openrc.sh -export OS_REGION_NAME=$OS_REGION_NAME -EOF - fi -source /tmp/tacker/admin-openrc.sh + source /tmp/tacker/admin-openrc.sh } function get_external_net () { @@ -145,6 +97,17 @@ EOF fi } + +install_client () { + echo "$0: $(date) Install $1" + git clone https://github.com/openstack/$1.git + cd $1 + if [ $# -eq 2 ]; then git checkout $2; fi + pip install -r requirements.txt + pip install . + cd .. +} + function setup () { echo "$0: $(date) Installing Tacker" # STEP 2: Install Tacker in the container @@ -161,6 +124,8 @@ function setup () { apt-get install -y apg apt-get install -y libffi-dev apt-get install -y libssl-dev + # newton: tacker uses ping for monitoring VIM (not in default docker containers) + apt-get install -y inetutils-ping export MYSQL_PASSWORD=$(/usr/bin/apg -n 1 -m 16 -c cl_seed) echo $MYSQL_PASSWORD >~/mysql debconf-set-selections <<< 'mysql-server mysql-server/root_password password '$MYSQL_PASSWORD @@ -172,17 +137,28 @@ function setup () { cd /tmp/tacker echo "$0: $(date) create Tacker database" - mysql --user=root --password=$MYSQL_PASSWORD -e "CREATE DATABASE tacker; GRANT ALL PRIVILEGES ON tacker.* TO 'root@localhost' IDENTIFIED BY '"$MYSQL_PASSWORD"'; GRANT ALL PRIVILEGES ON tacker.* TO 'root'@'%' IDENTIFIED BY '"$MYSQL_PASSWORD"';" + mysql --user=root --password=$MYSQL_PASSWORD -e "CREATE DATABASE tacker; GRANT ALL PRIVILEGES ON tacker.* TO 'root@localhost' IDENTIFIED BY '"$MYSQL_PASSWORD"'; GRANT ALL PRIVILEGES ON tacker.* TO 'tacker'@'%' IDENTIFIED BY '"$MYSQL_PASSWORD"';" echo "$0: $(date) Upgrage pip again - needs to be the latest version due to errors found in earlier testing" pip install --upgrade pip - echo "$0: $(date) install python-openstackclient python-glanceclient" - pip install --upgrade python-openstackclient python-glanceclient python-neutronclient keystonemiddleware + echo "$0: $(date) Install OpenStack clients" + install_client python-openstackclient $branch + install_client python-neutronclient $branch + +# pip install --upgrade python-openstackclient python-glanceclient python-neutronclient keystonemiddleware echo "$0: $(date) Setup admin-openrc.sh" source /tmp/tacker/admin-openrc.sh + uid=$(openstack user list | awk "/ tacker / { print \$2 }") + if [[ $uid ]]; then + echo "$0: $(date) Remove prior Tacker user etc" + openstack user delete tacker + openstack service delete tacker + # Note: deleting the service deletes the endpoint + fi + echo "$0: $(date) Setup Tacker user in OpenStack" service_project=$(openstack project list | awk "/service/ { print \$4 }") openstack user create --project $service_project --password tacker tacker @@ -205,7 +181,7 @@ function setup () { if [[ -d /tmp/tacker/tacker ]]; then rm -rf /tmp/tacker/tacker; fi git clone git://git.openstack.org/openstack/tacker cd tacker - git checkout stable/mitaka + git checkout stable/newton echo "$0: $(date) Setup Tacker" pip install -r requirements.txt @@ -213,34 +189,109 @@ function setup () { python setup.py install mkdir /var/log/tacker - # Following lines apply to master and not stable/mitaka - #echo "$0: $(date) install tox" - #pip install tox - #echo "$0: $(date) generate tacker.conf.sample" - #tox -e config-gen + echo "$0: $(date) install tox" + pip install --upgrade tox + echo "$0: $(date) generate tacker.conf.sample" + tox -e config-gen echo "$0: $(date) Update tacker.conf values" mkdir /usr/local/etc/tacker - cp etc/tacker/tacker.conf /usr/local/etc/tacker/tacker.conf - sed -i -- 's/# auth_strategy = keystone/auth_strategy = keystone/' /usr/local/etc/tacker/tacker.conf - sed -i -- 's/# debug = False/debug = True/' /usr/local/etc/tacker/tacker.conf - sed -i -- 's/# use_syslog = False/use_syslog = False/' /usr/local/etc/tacker/tacker.conf - sed -i -- 's~# state_path = /var/lib/tacker~state_path = /var/lib/tacker~' /usr/local/etc/tacker/tacker.conf - sed -i -- "s/project_name = service/project_name = $service_project/g" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/password = service-password/password = tacker/" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/username = tacker/username = tacker/" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~auth_url = http://127.0.0.1:35357~auth_url = http://$KEYSTONE_HOST:35357~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~identity_uri = http://127.0.0.1:5000~# identity_uri = http://127.0.0.1:5000~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~auth_uri = http://127.0.0.1:5000~auth_uri = http://$KEYSTONE_HOST:5000~" /usr/local/etc/tacker/tacker.conf - # Not sure what the effect of the next line is, given that we are running as root + cp etc/tacker/tacker.conf.sample /usr/local/etc/tacker/tacker.conf + + # [DEFAULT] section (update) + sed -i -- 's/#auth_strategy = keystone/auth_strategy = keystone/' /usr/local/etc/tacker/tacker.conf + # [DEFAULT] section (add to) + sed -i -- "/\[DEFAULT\]/adebug = True" /usr/local/etc/tacker/tacker.conf + sed -i -- "/\[DEFAULT\]/ause_syslog = False" /usr/local/etc/tacker/tacker.conf + sed -i -- "/\[DEFAULT\]/alogging_context_format_string = %(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(user_name)s %(project_name)s] %(instance)s%(message)s" /usr/local/etc/tacker/tacker.conf + sed -i -- 's~#policy_file = policy.json~policy_file = /usr/local/etc/tacker/policy.json~' /usr/local/etc/tacker/tacker.conf + sed -i -- 's~#state_path = /var/lib/tacker~state_path = /var/lib/tacker~' /usr/local/etc/tacker/tacker.conf + + # Not sure what the effect of the next line is, given that we are running as root in the container #sed -i -- "s~# root_helper = sudo~root_helper = sudo /usr/local/bin/tacker-rootwrap /usr/local/etc/tacker/rootwrap.conf~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~# connection = mysql://root:pass@127.0.0.1:3306/tacker~connection = mysql://root:$MYSQL_PASSWORD@localhost:3306/tacker?charset=utf8~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~heat_uri = http://localhost:8004/v1~heat_uri = http://$HEAT_HOST:8004/v1~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s~# api_paste_config = api-paste.ini~api_paste_config = /tmp/tacker/tacker/etc/tacker/api-paste.ini~" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/# bind_host = 0.0.0.0/bind_host = $ip/" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/# bind_port = 8888/bind_port = 9890/" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/stack_retries = 60/stack_retries = 10/" /usr/local/etc/tacker/tacker.conf - sed -i -- "s/stack_retry_wait = 5/stack_retry_wait = 60/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s~#api_paste_config = api-paste.ini~api_paste_config = /tmp/tacker/tacker/etc/tacker/api-paste.ini~" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#bind_host = 0.0.0.0/bind_host = $ip/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#bind_port = 8888/bind_port = 9890/" /usr/local/etc/tacker/tacker.conf + +# Newton changes, based upon sample newton gate test conf file provided by sridhar_ram on #tacker + region=$(openstack endpoint list | awk "/ nova / { print \$4 }") + sed -i -- "s/#nova_region_name = <None>/#nova_region_name = $region/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#nova_api_insecure = false/nova_api_insecure = False/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#nova_ca_certificates_file = <None>/nova_ca_certificates_file =/" /usr/local/etc/tacker/tacker.conf + keystone_adminurl=$(openstack endpoint show keystone | awk "/ adminurl / { print \$4 }") + sed -i -- "s~#nova_admin_auth_url = http://localhost:5000/v2.0~nova_admin_auth_url = $keystone_adminurl~" /usr/local/etc/tacker/tacker.conf + # TODO: don't hard-code service tenant ID + sed -i -- "s/#nova_admin_tenant_id = <None>/nova_admin_tenant_id = service/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#nova_admin_password = <None>/nova_admin_password = $OS_PASSWORD/" /usr/local/etc/tacker/tacker.conf + # this diff seems superfluous < nova_admin_user_name = nova + # only one ref in tacker (setting the default value) + # devstack/lib/tacker: iniset $TACKER_CONF DEFAULT nova_admin_user_name nova + # set nova_url to "/v2" (normal value is "/v2.1") due to tacker API version compatibility (?) + nova_ipport=$(openstack endpoint show nova | awk "/ adminurl / { print \$4 }" | awk -F'[/]' '{print $3}') + sed -i -- "s~#nova_url = http://127.0.0.1:8774/v2~nova_url = http://$nova_ipport/v2~" /usr/local/etc/tacker/tacker.conf + mkdir /var/lib/tacker + sed -i -- "s~#state_path = /var/lib/tacker~state_path = /var/lib/tacker~" /usr/local/etc/tacker/tacker.conf + + # [alarm_auth] section - optional (?) + # < url = http://15.184.66.78:35357/v3 + # < project_name = service + # < password = secretservice + # < uername = tacker + + # [nfvo_vim] section + sed -i -- "s/#default_vim = <None>/default_vim = VIM0/" /usr/local/etc/tacker/tacker.conf + + # [openstack_vim] section + sed -i -- "s/#stack_retries = 60/stack_retries = 10/" /usr/local/etc/tacker/tacker.conf + sed -i -- "s/#stack_retry_wait = 5/stack_retry_wait = 60/" /usr/local/etc/tacker/tacker.conf + + # newton: add [keystone_authtoken] missing in generated tacker.conf.sample, excluding the following + # (not referenced) memcached_servers = 15.184.66.78:11211 + # (not referenced) signing_dir = /var/cache/tacker + # (not referenced) cafile = /opt/stack/data/ca-bundle.pem + # (not referenced) auth_uri = http://15.184.66.78/identity + cat >>/usr/local/etc/tacker/tacker.conf <<EOF +[keystone_authtoken] +auth_url = $(openstack endpoint show keystone | awk "/ internalurl / { print \$4 }") +project_domain_name = Default +project_name = $service_project +user_domain_name = Default +password = tacker +username = tacker +auth_type = password +EOF + + # these diffs seem superfluous - not referenced at all: + # < transport_url = rabbit://stackrabbit:secretrabbit@15.184.66.78:5672/ + # < heat_uri = http://15.184.66.78:8004/v1 + + # newton: add [tacker_heat] missing in generated tacker.conf.sample + cat >>/usr/local/etc/tacker/tacker.conf <<EOF +[tacker_heat] +stack_retry_wait = 10 +stack_retries = 60 +heat_uri = http://$HEAT_HOST:8004/v1 +EOF + + # newton: add [database] missing in generated tacker.conf.sample + cat >>/usr/local/etc/tacker/tacker.conf <<EOF +[database] +connection = mysql://tacker:$MYSQL_PASSWORD@localhost:3306/tacker?charset=utf8 +EOF + + # newton: add [tacker_nova] missing in generated tacker.conf.sample, excluding the following + # these diffs seem superfluous - the only ref'd field is region_name: + # project_domain_id = default + # project_name = service + # user_domain_id = default + # password = secretservice + # username = nova + # auth_url = http://15.184.66.78/identity_v2_admin + # auth_plugin = password + cat >>/usr/local/etc/tacker/tacker.conf <<EOF +[tacker_nova] +region_name = $region +EOF echo "$0: $(date) Populate Tacker database" /usr/local/bin/tacker-db-manage --config-file /usr/local/etc/tacker/tacker.conf upgrade head @@ -250,7 +301,7 @@ function setup () { if [[ -d /tmp/tacker/python-tackerclient ]]; then rm -rf /tmp/tacker/python-tackerclient; fi git clone https://github.com/openstack/python-tackerclient cd python-tackerclient - git checkout stable/mitaka + git checkout stable/newton python setup.py install # deferred until its determined how to get this to Horizon @@ -271,14 +322,22 @@ function setup () { echo "$0: $(date) Register default VIM" cd /tmp/tacker + # TODO: bug in https://github.com/openstack/python-tackerclient/blob/stable/newton/tackerclient/common/utils.py + # expects that there will be a port specified in the auth_url + # TODO: bug: user_domain_name: Default is required even for identity v2 cat <<EOF >vim-config.yaml -auth_url: $OS_AUTH_URL +auth_url: http://$KEYSTONE_HOST:5000/identity/v2.0 username: $OS_USERNAME password: $OS_PASSWORD project_name: admin +project_domain_name: Default +user_domain_name: Default +user_id: $(openstack user list | awk "/ admin / { print \$2 }") EOF - tacker vim-register --config-file vim-config.yaml --description OpenStack --name VIM0 + # newton: NAME (was "--name") is now a positional parameter + tacker vim-register --config-file vim-config.yaml --description OpenStack VIM0 + if [ $? -eq 1 ]; then fail; fi setup_test_environment } @@ -343,22 +402,13 @@ function clean () { pid=($(neutron router-port-list vnf_private_router|grep -v name|awk '{print $2}')); for id in ${pid[@]}; do neutron router-interface-delete vnf_private_router vnf_private; done neutron router-delete vnf_private_router neutron net-delete vnf_private - sudo docker stop $(sudo docker ps -a | awk "/tacker/ { print \$1 }") - sudo docker rm -v $(sudo docker ps -a | awk "/tacker/ { print \$1 }") } start=`date +%s` dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` -case "$2" in +case "$1" in "init") setenv - uid=$(openstack user list | awk "/ tacker / { print \$2 }") - if [[ $uid ]]; then - echo "$0: $(date) Remove prior Tacker user etc" - openstack user delete tacker - openstack service delete tacker - # Note: deleting the service deletes the endpoint - fi create_container pass ;; @@ -371,7 +421,7 @@ case "$2" in pass ;; *) - echo "usage: bash tacker-setup.sh [tacker-cli|tacker-api] [init|setup|clean]" + echo "usage: bash tacker-setup.sh [init|setup|clean]" echo "init: Initialize docker container" echo "setup: Setup of Tacker in the docker container" echo "clean: remove Tacker service" diff --git a/tests/vHello_Tacker.sh b/tests/vHello_Tacker.sh index 669ee3b..b89eb9c 100644 --- a/tests/vHello_Tacker.sh +++ b/tests/vHello_Tacker.sh @@ -24,24 +24,36 @@ # Mitaka. # # Pre-State: -# models-joid-001 | models-apex-001 (installation of OPNFV system) +# This test can be run in either an OPNFV environment, or an plain OpenStack +# environment (e.g. Devstack). +# For Devstack running in a VM on the host, you must first enable the host to +# access the VMs running under Devstack: +# 1) In devstack VM: +# $ sudo iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE +# Sub the primary interface of your devstack VM for ens3, as needed. +# 2) On the host (e.g linux): +# $ sudo route add -net 172.24.0.0/16 gw 192.168.122.112 +# Sub your devstack Public network subnet for 172.24.0.0/16, and +# your devstack VM IP address on the host for 192.168.122.112 +# For OPNFV-based tests, pre-requisites are +# 1) models-joid-001 | models-apex-001 (installation of OPNFV system) # # Test Steps and Assertions: -# 1) bash vHello_Tacker.sh tacker-cli setup|start|run|stop|clean] +# 1) bash vHello_Tacker.sh setup <openrc> # models-tacker-001 (Tacker installation in a docker container on the jumphost) # models-nova-001 (Keypair creation) -# 2) bash vHello_Tacker.sh tacker-cli start +# 2) bash vHello_Tacker.sh start # models-tacker-002 (VNFD creation) # models-tacker-003 (VNF creation) # models-tacker-vnfd-001 (config_drive creation) # models-tacker-vnfd-002 (artifacts creation) # models-tacker-vnfd-003 (user_data creation) # models-vhello-001 (vHello VNF creation) -# 3) bash vHello_Tacker.sh tacker-cli stop +# 3) bash vHello_Tacker.sh stop # models-tacker-004 (VNF deletion) # models-tacker-005 (VNFD deletion) # models-tacker-vnfd-004 (artifacts deletion) -# 4) bash vHello_Tacker.sh tacker-cli clean +# 4) bash vHello_Tacker.sh clean # TODO: add assertions # # Post-State: @@ -51,19 +63,19 @@ # After step 3, the VNF is deleted and the system returned to step 1 post-state. # After step 4, the system returned to test pre-state. # -# Cleanup: bash vHello_Tacker.sh tacker-cli clean +# Cleanup: bash vHello_Tacker.sh clean # # How to use: # $ git clone https://gerrit.opnfv.org/gerrit/models # $ cd models/tests -# $ bash vHello_Tacker.sh [tacker-cli|tacker-api] [setup|start|run|stop|clean] -# tacker-cli: use Tacker CLI -# tacker-api: use Tacker RESTful API (not yet implemented) +# $ bash vHello_Tacker.sh [setup|start|run|stop|clean] [<openrc>] [<heat_host>] # setup: setup test environment -# start: install blueprint and run test # run: setup test environment and run test +# start: install blueprint and run test # stop: stop test and uninstall blueprint # clean: cleanup after test +# <openrc>: include for setup|run as location of OpenStack openrc file +# <heat_host>: include for setup|run as IP address of the Heat service trap 'fail' ERR @@ -123,23 +135,38 @@ setup () { mkdir -p /tmp/tacker chmod 777 /tmp/tacker/ cp $0 /tmp/tacker/. + cp $1 /tmp/tacker/admin-openrc.sh + source /tmp/tacker/admin-openrc.sh + echo "export HEAT_HOST=$2" >>/tmp/tacker/admin-openrc.sh + echo "export KEYSTONE_HOST=$(echo $OS_AUTH_URL | awk -F'[/]' '{print $3}')" >>/tmp/tacker/admin-openrc.sh chmod 755 /tmp/tacker/*.sh echo "$0: $(date) tacker-setup part 1" - bash utils/tacker-setup.sh $1 init + bash utils/tacker-setup.sh init + if [ $? -eq 1 ]; then fail; fi echo "$0: $(date) tacker-setup part 2" - CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }") +# TODO: find a generic way to set extension_drivers = port_security in ml2_conf.ini + # On the neutron service host, update ml2_conf.ini and and restart neutron service + # sed -i -- 's~#extension_drivers =~extension_drivers = port_security~' /etc/neutron/plugins/ml2/ml2_conf.ini + # For devstack, set in local.conf per http://docs.openstack.org/developer/devstack/guides/neutron.html + # Q_ML2_PLUGIN_EXT_DRIVERS=port_security + dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` if [ "$dist" == "Ubuntu" ]; then - echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security" - juju set neutron-api enable-ml2-port-security=true + dpkg -l juju + if [[ $? -eq 0 ]]; then + echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security" + juju set neutron-api enable-ml2-port-security=true + fi echo "$0: $(date) Execute tacker-setup.sh in the container" - sudo docker exec -it $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh $1 setup + sudo docker exec -it tacker /bin/bash /tmp/tacker/tacker-setup.sh setup + if [ $? -eq 1 ]; then fail; fi else echo "$0: $(date) Execute tacker-setup.sh in the container" - sudo docker exec -i -t $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh $1 setup + sudo docker exec -i -t tacker /bin/bash /tmp/tacker/tacker-setup.sh setup + if [ $? -eq 1 ]; then fail; fi fi assert "models-tacker-001 (Tacker installation in a docker container on the jumphost)" true @@ -150,7 +177,9 @@ setup () { echo "$0: $(date) copy tosca-vnfd-hello-world-tacker to blueprints folder" cp -r blueprints/tosca-vnfd-hello-world-tacker /tmp/tacker/blueprints +} +start() { echo "$0: $(date) setup OpenStack CLI environment" source /tmp/tacker/admin-openrc.sh @@ -164,22 +193,20 @@ setup () { echo "$0: $(date) Inject public key into blueprint" pubkey=$(cat /tmp/tacker/vHello.pub) sed -i -- "s~<pubkey>~$pubkey~" /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker/blueprint.yaml -} - -start() { - echo "$0: $(date) setup OpenStack CLI environment" - source /tmp/tacker/admin-openrc.sh echo "$0: $(date) Get external network for Floating IP allocations" + get_floating_net echo "$0: $(date) create VNFD" cd /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker - tacker vnfd-create --vnfd-file blueprint.yaml --name hello-world-tacker + # newton: NAME (was "--name") is now a positional parameter + tacker vnfd-create --vnfd-file blueprint.yaml hello-world-tacker if [ $? -eq 1 ]; then fail; fi assert "models-tacker-002 (VNFD creation)" true echo "$0: $(date) create VNF" - tacker vnf-create --vnfd-name hello-world-tacker --name hello-world-tacker + # newton: NAME (was "--name") is now a positional parameter + tacker vnf-create --vnfd-name hello-world-tacker hello-world-tacker if [ $? -eq 1 ]; then fail; fi echo "$0: $(date) wait for hello-world-tacker to go ACTIVE" @@ -187,7 +214,7 @@ start() { while [[ -z $active ]] do active=$(tacker vnf-show hello-world-tacker | grep ACTIVE) - if [ "$(tacker vnf-show hello-world-tacker | grep -c ERROR)" == "1" ]; then + if [ "$(tacker vnf-show hello-world-tacker | grep -c ERROR)" > "0" ]; then echo "$0: $(date) hello-world-tacker VNF creation failed with state ERROR" fail fi @@ -248,13 +275,15 @@ stop() { echo "$0: $(date) uninstall vHello blueprint via CLI" vid=($(tacker vnf-list|grep hello-world-tacker|awk '{print $2}')); for id in ${vid[@]}; do tacker vnf-delete ${id}; done - assert "models-tacker-004 (VNF deletion)" [[ -z "$(tacker vnf-list|grep hello-world-tacker|awk '{print $2}'))" ]] + assert "models-tacker-004 (VNF deletion)" [[ -z "$(tacker vnf-list|grep hello-world-tacker|awk '{print $2}')" ]] + + vid=($(tacker vnfd-list|grep hello-world-tacker|awk '{print $2}')); for id in ${vid[@]}; do try 10 10 "tacker vnfd-delete ${id}"; done + assert "models-tacker-005 (VNFD deletion)" [[ -z "$(tacker vnfd-list|grep hello-world-tacker|awk '{print $2}')" ]] - vid=($(tacker vnfd-list|grep hello-world-tacker|awk '{print $2}')); for id in ${vid[@]}; do tacker vnfd-delete ${id}; done - assert "models-tacker-005 (VNFD deletion)" [[ -z "$(tacker vnfd-list|grep hello-world-tacker|awk '{print $2}'))" ]] + for id in ${sg[@]}; do try 5 5 "openstack security group delete ${id}"; done iid=($(openstack image list|grep VNFImage|awk '{print $2}')); for id in ${iid[@]}; do openstack image delete ${id}; done - assert "models-tacker-vnfd-004 (artifacts deletion)" [[ -z "$(openstack image list|grep VNFImage|awk '{print $2}'))" ]] + assert "models-tacker-vnfd-004 (artifacts deletion)" [[ -z "$(openstack image list|grep VNFImage|awk '{print $2}')" ]] # Cleanup for workarounds fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done @@ -264,52 +293,47 @@ stop() { } forward_to_container () { - echo "$0: $(date) pass $2 command to vHello.sh in tacker container" + echo "$0: $(date) pass $1 command to vHello.sh in tacker container" CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }") - sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_Tacker.sh $1 $2 $2 + sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_Tacker.sh $1 if [ $? -eq 1 ]; then fail; fi } test_start=`date +%s` dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` -if [[ "$1" == "tacker-api" ]]; then - echo "$0: $(date) Tacker API use is not yet implemented" - fail -fi - -case "$2" in +case "$1" in setup) - setup $1 + setup $2 $3 if [ $? -eq 1 ]; then fail; fi pass ;; run) - setup $1 - forward_to_container $1 start + setup $2 $3 + forward_to_container start if [ $? -eq 1 ]; then fail; fi pass ;; start|stop) - if [[ $# -eq 2 ]]; then forward_to_container $1 $2 + if [[ -f /.dockerenv ]]; then + $1 else - # running inside the tacker container, ready to go - $2 $1 + forward_to_container $1 fi if [ $? -eq 1 ]; then fail; fi pass ;; clean) - forward_to_container stop $2 echo "$0: $(date) Uninstall Tacker and test environment" - bash utils/tacker-setup.sh $1 clean + forward_to_container stop + sudo docker exec -it tacker /bin/bash /tmp/tacker/tacker-setup.sh clean + sudo docker stop tacker + sudo docker rm -v tacker if [ $? -eq 1 ]; then fail; fi pass ;; *) - echo "usage: bash vHello_Tacker.sh [tacker-cli|tacker-api] [setup|start|run|clean]" - echo "tacker-cli: use Tacker CLI" - echo "tacker-api: use Tacker RESTful API (not yet implemented)" + echo "usage: bash vHello_Tacker.sh [setup|start|run|stop|clean]" echo "setup: setup test environment" echo "start: install blueprint and run test" echo "run: setup test environment and run test" |