Remove scripts no longer maintained

JIRA: MODELS-2

Change-Id: I1870fa48bafec54e1ae26183f7d4b4d55803f1b4
Signed-off-by: Bryan Sullivan <bryan.sullivan@att.com>

5 files changed, 0 insertions, 798 deletions

diff --git a/tests/OpenWRT-clean.sh b/tests/OpenWRT-clean.sh
deleted file mode 100755
index 957e5ac..0000000
--- a/tests/OpenWRT-clean.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-# Copyright 2015-2016 AT&T Intellectual Property, Inc
-#  
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#  
-# http://www.apache.org/licenses/LICENSE-2.0
-#  
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# What this is: Cleanup script for a basic test to validate an OPNFV install. 
-#
-# Status: this is a work in progress, under test. 
-#
-# How to use:
-#   $ source ~/git/copper/tests/adhoc/OpenWRT-clean.sh [OpenWRT]
-#   OpenWRT: clean OpenWRT resources only (leave public and internal networks)
-
-wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh
-source ~/setenv.sh
-
-echo "$0: Delete OpenWRT instance"
-instance=$(nova list | awk "/ OpenWRT / { print \$2 }")
-if [ "$instance" != "" ]; then nova delete $instance; fi
-
-echo "$0: Wait for OpenWRT to terminate"
-COUNTER=5
-RESULT="Wait!"
-until [[ $COUNTER -eq 0  || $RESULT == "Go!" ]]; do
-  OpenWRT_id=$(openstack server list | awk "/ cirros1 / { print \$4 }")
-  if [[ -z "$OpenWRT_id" ]]; then RESULT="Go!"; fi
-  let COUNTER-=1
-  sleep 5
-done
-
-echo "$0: Delete 'OpenWRT' security group"
-sg=$(neutron security-group-list | awk "/ OpenWRT / { print \$2 }")
-neutron security-group-delete $sg
-
-echo "$0: Delete floating ip"
-# FLOATING_IP_ID was saved by OpenWRT.sh
-source /tmp/OpenWRT_VARS.sh
-rm /tmp/OpenWRT_VARS.sh
-neutron floatingip-delete $FLOATING_IP_ID
-
-echo "$0: Delete OpenWRT key pair"
-nova keypair-delete OpenWRT
-rm /tmp/OpenWRT
-
-echo "$0: Delete neutron port with fixed_ip 192.168.1.1"
-port=$(neutron port-list | awk "/192.168.1.1/ { print \$2 }")
-if [ "$port" != "" ]; then neutron port-delete $port; fi
-
-echo "$0: Delete OpenWRT subnet"
-neutron subnet-delete OpenWRT
-
-echo "$0: Delete OpenWRT network"
-neutron net-delete OpenWRT
-
-if [[ "$1" == "OpenWRT" ]]; then exit 0; fi
-
-echo "$0: Get 'public_router' ID"
-router=$(neutron router-list | awk "/ public_router / { print \$2 }")
-
-echo "$0: Get internal port ID with subnet 10.0.0.1 on 'public_router'"
-internal_interface=$(neutron router-port-list $router | grep 10.0.0.1 | awk '{print $2}')
-
-echo "$0: If found, delete the port with subnet 10.0.0.1 on 'public_router'"
-if [ "$internal_interface" != "" ]; then neutron router-interface-delete $router port=$internal_interface; fi
-
-echo "$0: Delete remaining neutron ports on subnet 10.0.0.0"
-pid=($(neutron port-list | grep 10.0.0 | awk "/10.0.0/ { print \$2 }")); for id in ${pid[@]}; do neutron port-delete ${id};  done
-
-echo "$0: Clear the router gateway"
-neutron router-gateway-clear public_router
-
-echo "$0: Delete the router"
-neutron router-delete public_router
-
-echo "$0: Delete internal subnet"
-neutron subnet-delete internal
-
-echo "$0: Delete internal network"
-neutron net-delete internal
-
-
-
diff --git a/tests/OpenWRT.sh b/tests/OpenWRT.sh
deleted file mode 100755
index 2857d77..0000000
--- a/tests/OpenWRT.sh
+++ /dev/null
@@ -1,189 +0,0 @@
-#!/bin/bash
-# Copyright 2015-2016 AT&T Intellectual Property, Inc
-#  
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#  
-# http://www.apache.org/licenses/LICENSE-2.0
-#  
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# What this is: A basic test to validate an OPNFV install. Creates an image,
-# using the OpenWRT project and a private network over which OpenWRT will 
-# allocate addresses etc.
-#
-# Status: this is a work in progress, under test. Automated ping test to the 
-# internet and between VMs has not yet been implemented.
-#
-# Prequisites:
-#   python-openstackclient >=3.2.0
-#
-# How to use:
-#   $ bash ~/git/copper/tests/adhoc/OpenWRT.sh
-#   After test, cleanup with
-#   $ bash ~/git/copper/tests/adhoc/OpenWRT-clean.sh
-
-trap 'fail' ERR
-
-pass() {
-  echo "$0: Hooray!"
-  set +x #echo off
-  exit 0
-}
-
-# Use this to trigger fail() at the right places
-# if [ "$RESULT" == "Test Failed!" ]; then fail; fi
-fail() {
-  echo "$0: Test Failed!"
-  set +x
-  exit 1
-}
-
-# Find external network if any, and details
-function get_external_net () {
-  network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))
-  for id in ${network_ids[@]}; do
-      [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && ext_net_id=${id}
-  done
-  if [[ $ext_net_id ]]; then 
-    EXTERNAL_NETWORK_NAME=$(openstack network show $ext_net_id | awk "/ name / { print \$4 }")
-    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")
-  else
-    echo "$0: External network not found"
-    echo "$0: Create external network"
-    neutron net-create public --router:external
-    EXTERNAL_NETWORK_NAME="public"
-    echo "$0: Create external subnet"
-    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1
-    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")
-  fi
-}
-
-wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh
-source ~/setenv.sh
-
-echo "$0: create OpenWRT image"
-image=$(openstack image list | awk "/ OpenWRT / { print \$2 }")
-if [ -z $image ]; then glance --os-image-api-version 1 image-create --name OpenWRT --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare
-fi
-
-get_external_net
-
-echo "$0: Create floating IP for external subnet"
-FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
-FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)
-# Save ID to pass to cleanup script
-echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/OpenWRT_VARS.sh
-
-INTERNAL_NET_ID=$(neutron net-list | awk "/ internal / { print \$2 }") 
-if [[ -z $INTERNAL_NET_ID ]]; then 
-  echo "$0: Create internal network"
-  neutron net-create internal
-
-  echo "$0: Create internal subnet"
-  neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8
-fi
-
-if [[ -z $(neutron router-list | awk "/ public_router / { print \$2 }") ]]; then 
-  echo "$0: Create public_router"
-  neutron router-create public_router
-
-  echo "$0: Create public_router gateway"
-  neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME
-
-  echo "$0: Add router interface for internal network"
-  neutron router-interface-add public_router subnet=internal
-fi
-
-echo "$0: Create OpenWRT network"
-neutron net-create OpenWRT
-wrt_net_id=$(neutron net-list | awk "/ OpenWRT / { print \$2 }") 
-
-echo "$0: Create OpenWRT subnet"
-neutron subnet-create OpenWRT 192.168.1.0/24 --disable-dhcp --name OpenWRT --gateway 192.168.1.1
-
-echo "$0: Create OpenWRT security group"
-neutron security-group-create OpenWRT
-
-echo "$0: Add rules to OpenWRT security group"
-neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 OpenWRT
-neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=80 --port-range-max=80 OpenWRT
-neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 OpenWRT
-neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 OpenWRT
-neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 OpenWRT
-
-echo "$0: Create Nova key pair"
-ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.1.1
-nova keypair-add OpenWRT > /tmp/OpenWRT
-chmod 600 /tmp/OpenWRT
-
-echo "$0: Create OpenWRT port for LAN"
-LAN_PORT_ID=$(neutron port-create OpenWRT --fixed-ip ip_address=192.168.1.1 | awk "/ id / { print \$4 }")
-
-echo "$0: Create OpenWRT port for WAN"
-WAN_PORT_ID=$(neutron port-create internal | awk "/ id / { print \$4 }")
-# The following does not work with a single-NIC compute node
-# EXT_PORT_ID=$(neutron port-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
-
-echo "$0: Boot OpenWRT with internal net port"
-openstack server create --flavor m1.tiny --image OpenWRT --nic port-id=$WAN_PORT_ID --security-group OpenWRT --security-group default --key-name OpenWRT OpenWRT
-
-echo "$0: Add OpenWRT security group (should have been done thru the server create command but...)"
-openstack server add security group OpenWRT OpenWRT
-
-# failed with: either net-id or port-id should be specified but not both
-# openstack server create --flavor m1.tiny --image OpenWRT --nic net-id=$wrt_net_id,v4-fixed-ip=192.168.1.1 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --key-name OpenWRT OpenWRT
-# openstack server create --flavor m1.tiny --image OpenWRT --nic v4-fixed-ip=192.168.1.1 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --key-name OpenWRT OpenWRT
-
-echo "$0: Wait for OpenWRT to go ACTIVE"
-COUNTER=12
-RESULT="Test Failed!"
-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
-  status=$(openstack server show OpenWRT | awk "/ status / { print \$4 }")
-  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi
-  let COUNTER-=1
-  sleep 5
-done
-if [ "$RESULT" == "Test Failed!" ]; then fail; fi
-
-echo "$0: Associate floating IP to OpenWRT external port"
-neutron floatingip-associate $FLOATING_IP_ID $WAN_PORT_ID
-
-echo "$0: Attach eth1 to OpenWRT internal port"
-nova interface-attach --port-id $LAN_PORT_ID OpenWRT
-
-echo "$0: Boot cirros1 with internal net port"
-openstack server create --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --security-group default --key-name OpenWRT cirros1
-
-echo "$0: Wait for cirros1 to go ACTIVE"
-COUNTER=12
-RESULT="Test Failed!"
-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
-  status=$(openstack server show cirros1 | awk "/ status / { print \$4 }")
-  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi
-  let COUNTER-=1
-  sleep 5
-done
-if [ "$RESULT" == "Test Failed!" ]; then fail; fi
-
-echo "$0: Create floating IP for external subnet"
-FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
-FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)
-
-echo "$0: Associate floating IP to cirros1 internal port"
-nova floating-ip-associate cirros1 $FLOATING_IP
-
-echo "$0: Create cirros1 port for OpenWRT net"
-INT_PORT_ID=$(neutron port-create OpenWRT --fixed-ip ip_address=192.168.1.2 | awk "/ id / { print \$4 }")
-
-echo "$0: Attach eth1 to cirros1 internal port"
-nova interface-attach --port-id $INT_PORT_ID cirros1
-
-
-
-pass
diff --git a/tests/utils/ansible-setup.sh b/tests/utils/ansible-setup.sh
deleted file mode 100644
index 67e4d59..0000000
--- a/tests/utils/ansible-setup.sh
+++ /dev/null
@@ -1,173 +0,0 @@
-#!/bin/bash
-# Copyright 2016 AT&T Intellectual Property, Inc
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# What this is: Setup script for Ansible in an Unbuntu Xenial docker container.
-#
-# Status: this is a work in progress, under test.
-#
-# How to use:
-#   $ bash ansible-setup.sh [init|setup|clean]
-#   init: Initialize docker container
-#   setup: Setup of Ansible in the docker container
-#   clean: Clean
-
-pass() {
-  echo "$0: Hooray!"
-  set +x #echo off
-  exit 0
-}
-
-fail() {
-  echo "$0: Failed!"
-  set +x
-  exit 1
-}
-
-function setenv () {
-if [ "$dist" == "Ubuntu" ]; then
-  echo "$0: Ubuntu-based install"
-  echo "$0: Create the environment file"
-  KEYSTONE_HOST=$(juju status --format=short | awk "/keystone\/0/ { print \$3 }")
-  cat <<EOF >/tmp/ansible/admin-openrc.sh
-export CONGRESS_HOST=$(juju status --format=short | awk "/openstack-dashboard/ { print \$3 }")
-export HORIZON_HOST=$(juju status --format=short | awk "/openstack-dashboard/ { print \$3 }")
-export KEYSTONE_HOST=$KEYSTONE_HOST
-export CEILOMETER_HOST=$(juju status --format=short | awk "/ceilometer\/0/ { print \$3 }")
-export CINDER_HOST=$(juju status --format=short | awk "/cinder\/0/ { print \$3 }")
-export GLANCE_HOST=$(juju status --format=short | awk "/glance\/0/ { print \$3 }")
-export NEUTRON_HOST=$(juju status --format=short | awk "/neutron-api\/0/ { print \$3 }")
-export NOVA_HOST=$(juju status --format=short | awk "/nova-cloud-controller\/0/ { print \$3 }")
-export OS_USERNAME=admin
-export OS_PASSWORD=openstack
-export OS_TENANT_NAME=admin
-export OS_AUTH_URL=http://$KEYSTONE_HOST:5000/v2.0
-export OS_REGION_NAME=RegionOne
-EOF
-else
-  # Centos
-  echo "$0: Centos-based install"
-  echo "$0: Setup undercloud environment so we can get overcloud Controller server address"
-  source ~/stackrc
-  echo "$0: Get address of Controller node"
-  export CONTROLLER_HOST1=$(openstack server list | awk "/overcloud-controller-0/ { print \$8 }" | sed 's/ctlplane=//g')
-  echo "$0: Create the environment file"
-  cat <<EOF >/tmp/ansible/admin-openrc.sh
-export HORIZON_HOST=$CONTROLLER_HOST1
-export CONGRESS_HOST=$CONTROLLER_HOST1
-export KEYSTONE_HOST=$CONTROLLER_HOST1
-export CEILOMETER_HOST=$CONTROLLER_HOST1
-export CINDER_HOST=$CONTROLLER_HOST1
-export GLANCE_HOST=$CONTROLLER_HOST1
-export NEUTRON_HOST=$CONTROLLER_HOST1
-export NOVA_HOST=$CONTROLLER_HOST1
-EOF
-  cat ~/overcloudrc >>/tmp/ansible/admin-openrc.sh
-  source ~/overcloudrc
-  export OS_REGION_NAME=$(openstack endpoint list | awk "/ nova / { print \$4 }")
-  # sed command below is a workaound for a bug - region shows up twice for some reason
-  cat <<EOF | sed '$d' >>/tmp/ansible/admin-openrc.sh
-export OS_REGION_NAME=$OS_REGION_NAME
-EOF
-fi
-source /tmp/ansible/admin-openrc.sh
-}
-
-function create_container () {
-  echo "$0: Creating docker container for Ansible installation"
-  # STEP 1: Create the Ansible container and launch it
-  echo "$0: Copy this script to /tmp/ansible"
-  mkdir /tmp/ansible
-  cp $0 /tmp/ansible/.
-  chmod 755 /tmp/ansible/*.sh
-
-  echo "$0: Setup admin-openrc.sh"
-  setenv
-
-  echo "$0: Setup container"
-  if [ "$dist" == "Ubuntu" ]; then
-    # xenial is needed for python 3.5
-    sudo docker pull ubuntu:xenial
-    sudo service docker start
-    sudo docker run -it -d -v /tmp/ansible/:/tmp/ansible --name ansible ubuntu:xenial /bin/bash
-  else 
-    # Centos
-    echo "Centos-based install"
-    sudo tee /etc/yum.repos.d/docker.repo <<-'EOF'
-[dockerrepo]
-name=Docker Repository--parents 
-baseurl=https://yum.dockerproject.org/repo/main/centos/7/
-enabled=1
-gpgcheck=1
-gpgkey=https://yum.dockerproject.org/gpg 
-EOF
-    sudo yum install -y docker-engine
-    # xenial is needed for python 3.5
-    sudo service docker start
-    sudo docker pull ubuntu:xenial
-    sudo docker run -i -t -d -v /tmp/ansible/:/tmp/ansible --name ansible ubuntu:xenial /bin/bash
-  fi
-}
-
-function setup () {
-  echo "$0: Installing Ansible"
-  # STEP 2: Install Ansible in the container
-  # Per http://docs.ansible.com/ansible/intro_installation.html
-  echo "$0: Install dependencies - OS specific"
-  apt-get update
-  apt-get install -y python
-  apt-get install -y python-dev
-  apt-get install -y python-pip
-  apt-get install -y wget
-  apt-get install -y openssh-server
-  apt-get install -y git
-  apt-get install -y apg
-  apt-get install -y libffi-dev
-  apt-get install -y libssl-dev
-
-  echo "$0: Install Ansible and Shade"
-  pip install --upgrade ansible
-  pip install --upgrade shade
-
-  echo "$0: Create key pair for interacting with servers via Ansible"
-  ssh-keygen -t rsa -N "" -f /tmp/ansible/ansible -C ubuntu@ansible
-  chmod 600 /tmp/ansible/ansible
-}
-
-function clean () {
-  sudo docker stop $(sudo docker ps -a | awk "/ansible/ { print \$1 }")
-  sudo docker rm -v $(sudo docker ps -a | awk "/ansible/ { print \$1 }")
-}
-
-dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
-case "$1" in
-  "init")
-    create_container
-    pass
-    ;;
-  "setup")
-    setup
-    pass
-    ;;
-  "clean")
-    clean
-    pass
-    ;;
-  *)
-    echo "usage: bash Ansible-setup.sh [init|setup|clean]"
-    echo "init: Initialize docker container"
-    echo "setup: Setup of Ansible in the docker container"
-    echo "clean: remove Ansible"
-    fail
-esac
diff --git a/tests/utils/apex_wol_workaround.sh b/tests/utils/apex_wol_workaround.sh
deleted file mode 100644
index 0be3fa2..0000000
--- a/tests/utils/apex_wol_workaround.sh
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/bin/bash
-# Copyright 2016 AT&T Intellectual Property, Inc
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# What this is: Workaround for issues with the undercloud suppor for
-# PXE booting WOL devices. The TFTP RRQ "undionly.kpxe" events (through
-# which the booted host requests the PXE boot image) are not making it
-# to the undercloud. So two workarounds are implemented: a tftp server
-# for undionly.kpxe is installed on the jumphost, and manual invocation
-# of the WOL is invoked (as the undercloud was never issuing the WOL
-# packets).
-#
-# Status: this is a work in progress, under test.
-#
-# How to use:
-# As root on the jumphost, start this script as soon as deploy is started.
-# It will wait for the Ironic log to get created, then watch for the following
-# key log entries and take action on them directly or through notifying the user
-# to take action as needed (e.g. power-off the node).
-# 2016-10-07 23:26:10.597 17686 INFO ironic.drivers.modules.wol [req-ec2f0a60-5f90-4706-a2b3-b7217193166d - - - - -] Reboot called for node 2baf581d-aa47-481e-a28e-304e0959b871. Wake-On-Lan does not fully support this operation. Trying to power on the node.
-# 2016-10-07 23:56:29.876 17686 INFO ironic.drivers.modules.wol [req-92128326-889c-47a8-94ee-2fec77c2de44 - - - - -] Power off called for node 579967bd-1e4d-4212-bf9b-1716a1cd4cfa. Wake-On-Lan does not support this operation. Manual intervention required to perform this action.
-# 2016-10-08 23:57:17.008 17691 WARNING ironic.drivers.modules.agent_base_vendor [req-44232e37-c38a-4099-8d81-871700e4dc2a - - - - -] Failed to soft power off node 165841ec-e8d2-4592-8f15-55742899fff5 in at least 30 seconds. Error: RetryError[Attempts: 7, Value: power on]
-#
-#   $ bash apex_wol_workaround.sh 
-
-echo "$0: Install tftp server"
-yum install tftp tftp-server xinetd
-cat >/etc/xinetd.d/tftp <<EOF
-# default: off
-# description: The tftp server serves files using the trivial file transfer
-#	protocol.  The tftp protocol is often used to boot diskless
-#	workstations, download configuration files to network-aware printers,
-#	and to start the installation process for some operating systems.
-service tftp
-{
-        socket_type             = dgram
-        protocol                = udp
-        wait                    = yes
-        user                    = root
-        server                  = /usr/sbin/in.tftpd
-        server_args             = -c -s /var/lib/tftpboot
-        disable                 = no
-        per_source              = 11
-        cps                     = 100 2
-        flags                   = IPv4
-}
-EOF
-chmod 777 /var/lib/tftpboot
-iptables -I INPUT -p udp --dport 69 -j ACCEPT
-systemctl enable xinetd.service
-systemctl restart xinetd.service
-curl http://boot.ipxe.org/undionly.kpxe > /var/lib/tftpboot/undionly.kpxe
-
-UNDERCLOUD_MAC=$(virsh domiflist undercloud | grep default | grep -Eo "[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+")
-while [[ -z $UNDERCLOUD_MAC ]]; do
-  echo "$0: Waiting 10 seconds for undercloud to be created"
-  sleep 10
-  UNDERCLOUD_MAC=$(virsh domiflist undercloud | grep default | grep -Eo "[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+:[0-9a-f\]+")
-done
-
-UNDERCLOUD_IP=$(/usr/sbin/arp -e | grep ${UNDERCLOUD_MAC} | awk {'print $1'})
-while [[ -z $UNDERCLOUD_IP ]]; do
-  echo "$0: Waiting 10 seconds for undercloud IP to be assigned"
-  sleep 10
-  UNDERCLOUD_IP=$(/usr/sbin/arp -e | grep ${UNDERCLOUD_MAC} | awk {'print $1'})
-done
-
-ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no stack@$UNDERCLOUD_IP <<EOF
-while [[ ! -f /var/log/ironic/ironic-conductor.log ]]; do
-  echo "$0: Waiting 10 seconds for ironic-conductor.log to be created"
-  sleep 10
-done
-
-source stackrc
-mkfifo /tmp/myfifo
-tail -f /var/log/ironic/ironic-conductor.log | grep -e "Reboot called for node" -e "Failed to soft power off node" > /tmp/myfifo &
-while read line
-do
-  if [[ $(echo "$line" | grep "Reboot called for node") ]]; then
-    IRONIC_NODE_ID=$(echo "$line" | sed -e 's/^.*node //' | awk '{print $1}' | sed -e 's/.$//g')
-    SERVER_ID=$(ironic node-show $IRONIC_NODE_ID  | awk "/ instance_uuid / { print \$4 }")
-    SERVER_NAME=$(openstack server show $SERVER_ID  | awk "/ name / { print \$4 }")
-    echo "$0: Waking $SERVER_NAME"
-    if [[ $SERVER_NAME == "overcloud-controller-0" ]]; then sudo ether-wake B8:AE:ED:76:FB:C4
-    else sudo ether-wake B8:AE:ED:76:F9:FF
-    fi
-  fi
-
-  if [[ $(echo "$line" | grep "Failed to soft power off node") ]]; then
-    IRONIC_NODE_ID=$(echo "$line" | sed -e 's/^.*node //' | awk '{print $1}' | sed -e 's/.$//g')
-    SERVER_ID=$(ironic node-show $IRONIC_NODE_ID  | awk "/ instance_uuid / { print \$4 }")
-    SERVER_NAME=$(openstack server show $SERVER_ID  | awk "/ name / { print \$4 }")
-    echo "$0: *** POWER OFF $SERVER_NAME NOW! ***"
-  fi
-done </var/log/ironic/ironic-conductor.log
-EOF
diff --git a/tests/vLamp_Ansible.sh b/tests/vLamp_Ansible.sh
deleted file mode 100644
index 801b3e1..0000000
--- a/tests/vLamp_Ansible.sh
+++ /dev/null
@@ -1,236 +0,0 @@
-#!/bin/bash
-# Copyright 2016 AT&T Intellectual Property, Inc
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# What this is: Deployment test for the Tacker Hello World blueprint.
-#
-# Status: this is a work in progress, under test.
-#
-# How to use:
-#   $ git clone https://gerrit.opnfv.org/gerrit/models
-#   $ cd models/tests
-#   $ bash vLamp_Ansible.sh [setup|start|run|stop|clean]
-#   setup: setup test environment
-#   start: install blueprint and run test
-#   run: setup test environment and run test
-#   stop: stop test and uninstall blueprint
-#   clean: cleanup after test
-
-trap 'fail' ERR
-
-pass() {
-  echo "$0: Hooray!"
-  set +x #echo off
-  exit 0
-}
-
-fail() {
-  echo "$0: Test Failed!"
-  set +x
-  exit 1
-}
-
-get_floating_net () {
-  network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))
-  for id in ${network_ids[@]}; do
-      [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && FLOATING_NETWORK_ID=${id}
-  done
-  if [[ $FLOATING_NETWORK_ID ]]; then
-    FLOATING_NETWORK_NAME=$(openstack network show $FLOATING_NETWORK_ID | awk "/ name / { print \$4 }")
-  else
-    echo "$0: Floating network not found"
-    exit 1
-  fi
-}
-
-try () {
-  count=$1
-  $3
-  while [[ $? -eq 1 && $count -gt 0 ]] 
-  do 
-    sleep $2
-    let count=$count-1
-    $3
-  done
-  if [[ $count -eq 0 ]]; then echo "$0: Command \"$3\" was not successful after $1 tries"; fi
-}
-
-setup () {
-  echo "$0: Setup temp test folder /tmp/ansible and copy this script there"
-  if [ -d /tmp/ansible ]; then sudo rm -rf /tmp/ansible; fi 
-  mkdir -p /tmp/ansible
-  chmod 777 /tmp/ansible/
-  cp $0 /tmp/ansible/.
-  chmod 755 /tmp/ansible/*.sh
-
-  echo "$0: ansible-setup part 1"
-  bash utils/ansible-setup.sh init
-
-  echo "$0: ansible-setup part 2"
-  CONTAINER=$(sudo docker ps -l | awk "/ansible/ { print \$1 }")
-  dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
-  if [ "$dist" == "Ubuntu" ]; then
-    echo "$0: Execute ansible-setup.sh in the container"
-    sudo docker exec -it $CONTAINER /bin/bash /tmp/ansible/ansible-setup.sh setup
-  else
-    echo "$0: Execute ansible-setup.sh in the container"
-    sudo docker exec -i -t $CONTAINER /bin/bash /tmp/ansible/ansible-setup.sh setup
-  fi
-
-  echo "$0: reset blueprints folder"
-  if [[ -d /tmp/ansible/blueprints/lampstack ]]; then rm -rf /tmp/ansible/blueprints/lampstack; fi
-  mkdir -p /tmp/ansible/blueprints/
-
-  echo "$0: copy lampstack to blueprints folder"
-  cd /tmp/
-  git clone https://github.com/openstack/osops-tools-contrib.git
-  cp -r osops-tools-contrib/ansible/lampstack /tmp/ansible/blueprints
-
-  echo "$0: setup OpenStack environment"
-  source /tmp/ansible/admin-openrc.sh
-
-  echo "$0: determine external (public) network as the floating ip network"
-  get_floating_net
-
-  echo "$0: create lampstack vars file for OPNFV"
-  # trusty-server is needed since xenial does not come with python pre-installed
-  # TODO: find some way to get ansible to install dependencies!
-cat >/tmp/ansible/blueprints/lampstack/vars/opnfv.yml <<EOF
----
-horizon_url: "http://$HORIZON_HOST"
-
-auth: {
-  auth_url: "$OS_AUTH_URL",
-  username: "admin",
-  password: "{{ password }}",
-  project_name: "admin"
-}
-
-app_env: {
-  image_name: "trusty-server",
-  region_name: "$OS_REGION_NAME",
-  availability_zone: "nova",
-  validate_certs: True,
-  private_net_name: "internal",
-  public_net_name: "$FLOATING_NETWORK_NAME",
-  flavor_name: "m1.small",
-  public_key_file: "/tmp/ansible/ansible.pub",
-  stack_size: 4,
-  volume_size: 2,
-  block_device_name: "/dev/vdb",
-  wp_theme: "https://downloads.wordpress.org/theme/iribbon.2.0.65.zip",
-  wp_posts: "http://wpcandy.s3.amazonaws.com/resources/postsxml.zip"
-}
-EOF
-
-  echo "$0: Disable host key checking (fix for SSH connection issues?)"
-  echo "host_key_checking = False" >>/tmp/ansible/blueprints/lampstack/ansible.cfg
-
-  echo "$0: Setup trusty-server glance image if needed"
-  if [[ -z $(openstack image list | awk "/ trusty-server / { print \$2 }") ]]; then glance --os-image-api-version 1 image-create --name trusty-server --disk-format qcow2 --location https://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img --container-format bare; fi 
-
-  if [[ -z $(neutron net-list | awk "/ internal / { print \$2 }") ]]; then 
-    echo "$0: Create internal network"
-    neutron net-create internal
-
-    echo "$0: Create internal subnet"
-    neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8
-  fi
-
-  if [[ -z $(neutron router-list | awk "/ public_router / { print \$2 }") ]]; then 
-    echo "$0: Create router"
-    neutron router-create public_router
-
-    echo "$0: Create router gateway"
-    neutron router-gateway-set public_router $FLOATING_NETWORK_NAME
-
-    echo "$0: Add router interface for internal network"
-    neutron router-interface-add public_router subnet=internal
-  fi
-}
-
-start() {
-  echo "$0: Add ssh key"
-  chown root /tmp/ansible/ansible
-  eval $(ssh-agent -s)
-  ssh-add /tmp/ansible/ansible
-
-  echo "$0: setup OpenStack environment"
-  source /tmp/ansible/admin-openrc.sh
-
-  echo "$0: Clear known hosts (workaround for ssh connection issues)"
-  rm ~/.ssh/known_hosts
-
-  echo "$0: invoke blueprint install via Ansible"
-  cd /tmp/ansible/blueprints/lampstack
-  ansible-playbook -vvv -e "action=apply env=opnfv password=$OS_PASSWORD" site.yml
-
-  pass
-}
-
-stop() {
-  echo "$0: Add ssh key"
-  eval $(ssh-agent -s)
-  ssh-add /tmp/ansible/ansible
-
-  echo "$0: setup OpenStack environment"
-  source /tmp/ansible/admin-openrc.sh
-
-  echo "$0: invoke blueprint destroy via Ansible"
-  cd /tmp/ansible/blueprints/lampstack
-  ansible-playbook -vvv -e "action=destroy env=opnfv password=$OS_PASSWORD" site.yml
-
-  pass
-}
-
-forward_to_container () {
-  echo "$0: pass $1 command to vLamp_Ansible.sh in tacker container"
-  CONTAINER=$(sudo docker ps -a | awk "/ansible/ { print \$1 }")
-  sudo docker exec $CONTAINER /bin/bash /tmp/ansible/vLamp_Ansible.sh $1 $1
-  if [ $? -eq 1 ]; then fail; fi
-}
-
-dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
-case "$1" in
-  setup)
-    setup
-    pass
-    ;;
-  run)
-    setup
-    forward_to_container start
-    pass
-    ;;
-  start|stop)
-    if [[ $# -eq 1 ]]; then forward_to_container $1
-    else
-      # running inside the tacker container, ready to go
-      $1
-    fi
-    pass
-    ;;
-  clean)
-    echo "$0: Uninstall Ansible and test environment"
-    bash utils/ansible-setup.sh clean
-    pass
-    ;;
-  *)
-    echo "usage: bash vLamp_Ansible.sh [setup|start|run|clean]"
-    echo "setup: setup test environment"
-    echo "start: install blueprint and run test"
-    echo "run: setup test environment and run test"
-    echo "stop: stop test and uninstall blueprint"
-    echo "clean: cleanup after test"
-    fail
-esac