diff options
Diffstat (limited to 'qemu/roms/u-boot/include/usb_defs.h')
| -rw-r--r-- | qemu/roms/u-boot/include/usb_defs.h | 289 |
1 files changed, 0 insertions, 289 deletions
diff --git a/qemu/roms/u-boot/include/usb_defs.h b/qemu/roms/u-boot/include/usb_defs.h deleted file mode 100644 index 236a5ecdf..000000000 --- a/qemu/roms/u-boot/include/usb_defs.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Note: Part of this code has been derived from linux - */ -#ifndef _USB_DEFS_H_ -#define _USB_DEFS_H_ - -/* USB constants */ - -/* Device and/or Interface Class codes */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_DATA 10 -#define USB_CLASS_VENDOR_SPEC 0xff - -/* some HID sub classes */ -#define USB_SUB_HID_NONE 0 -#define USB_SUB_HID_BOOT 1 - -/* some UID Protocols */ -#define USB_PROT_HID_NONE 0 -#define USB_PROT_HID_KEYBOARD 1 -#define USB_PROT_HID_MOUSE 2 - - -/* Sub STORAGE Classes */ -#define US_SC_RBC 1 /* Typically, flash devices */ -#define US_SC_8020 2 /* CD-ROM */ -#define US_SC_QIC 3 /* QIC-157 Tapes */ -#define US_SC_UFI 4 /* Floppy */ -#define US_SC_8070 5 /* Removable media */ -#define US_SC_SCSI 6 /* Transparent */ -#define US_SC_MIN US_SC_RBC -#define US_SC_MAX US_SC_SCSI - -/* STORAGE Protocols */ -#define US_PR_CB 1 /* Control/Bulk w/o interrupt */ -#define US_PR_CBI 0 /* Control/Bulk/Interrupt */ -#define US_PR_BULK 0x50 /* bulk only */ - -/* USB types */ -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* USB recipients */ -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 - -/* USB directions */ -#define USB_DIR_OUT 0 -#define USB_DIR_IN 0x80 - -/* - * bmRequestType: USB Device Requests, table 9.2 USB 2.0 spec. - * (shifted) direction/type/recipient. - */ -#define DeviceRequest \ - ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) - -#define DeviceOutRequest \ - ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) - -#define InterfaceRequest \ - ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) - -#define EndpointRequest \ - ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) - -#define EndpointOutRequest \ - ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) - -/* Descriptor types */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 - -#define USB_DT_HID (USB_TYPE_CLASS | 0x01) -#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) -#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) - -/* Descriptor sizes per descriptor type */ -#define USB_DT_DEVICE_SIZE 18 -#define USB_DT_CONFIG_SIZE 9 -#define USB_DT_INTERFACE_SIZE 9 -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ -#define USB_DT_HUB_NONVAR_SIZE 7 -#define USB_DT_HID_SIZE 9 - -/* Endpoints */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 - -/* USB Packet IDs (PIDs) */ -#define USB_PID_UNDEF_0 0xf0 -#define USB_PID_OUT 0xe1 -#define USB_PID_ACK 0xd2 -#define USB_PID_DATA0 0xc3 -#define USB_PID_UNDEF_4 0xb4 -#define USB_PID_SOF 0xa5 -#define USB_PID_UNDEF_6 0x96 -#define USB_PID_UNDEF_7 0x87 -#define USB_PID_UNDEF_8 0x78 -#define USB_PID_IN 0x69 -#define USB_PID_NAK 0x5a -#define USB_PID_DATA1 0x4b -#define USB_PID_PREAMBLE 0x3c -#define USB_PID_SETUP 0x2d -#define USB_PID_STALL 0x1e -#define USB_PID_UNDEF_F 0x0f - -/* Standard requests */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C - -/* HID requests */ -#define USB_REQ_GET_REPORT 0x01 -#define USB_REQ_GET_IDLE 0x02 -#define USB_REQ_GET_PROTOCOL 0x03 -#define USB_REQ_SET_REPORT 0x09 -#define USB_REQ_SET_IDLE 0x0A -#define USB_REQ_SET_PROTOCOL 0x0B - -/* Device features */ -#define USB_FEAT_HALT 0x00 -#define USB_FEAT_WAKEUP 0x01 -#define USB_FEAT_TEST 0x02 - -/* Test modes */ -#define USB_TEST_MODE_J 0x01 -#define USB_TEST_MODE_K 0x02 -#define USB_TEST_MODE_SE0_NAK 0x03 -#define USB_TEST_MODE_PACKET 0x04 -#define USB_TEST_MODE_FORCE_ENABLE 0x05 - - -/* "pipe" definitions */ - -#define PIPE_ISOCHRONOUS 0 -#define PIPE_INTERRUPT 1 -#define PIPE_CONTROL 2 -#define PIPE_BULK 3 -#define PIPE_DEVEP_MASK 0x0007ff00 - -#define USB_ISOCHRONOUS 0 -#define USB_INTERRUPT 1 -#define USB_CONTROL 2 -#define USB_BULK 3 - -/* USB-status codes: */ -#define USB_ST_ACTIVE 0x1 /* TD is active */ -#define USB_ST_STALLED 0x2 /* TD is stalled */ -#define USB_ST_BUF_ERR 0x4 /* buffer error */ -#define USB_ST_BABBLE_DET 0x8 /* Babble detected */ -#define USB_ST_NAK_REC 0x10 /* NAK Received*/ -#define USB_ST_CRC_ERR 0x20 /* CRC/timeout Error */ -#define USB_ST_BIT_ERR 0x40 /* Bitstuff error */ -#define USB_ST_NOT_PROC 0x80000000L /* Not yet processed */ - - -/************************************************************************* - * Hub defines - */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub Class feature numbers - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 -#define USB_PORT_FEAT_HIGHSPEED 10 -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 - -/* - * Changes to Port feature numbers for Super speed, - * from USB 3.0 spec Table 10-8 - */ -#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 -#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 -#define USB_SS_PORT_FEAT_C_LINK_STATE 25 -#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 -#define USB_SS_PORT_FEAT_BH_RESET 28 -#define USB_SS_PORT_FEAT_C_BH_RESET 29 - -/* wPortStatus bits */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ -#define USB_PORT_STAT_SPEED_MASK \ - (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) - -/* - * Changes to wPortStatus bit field in USB 3.0 - * See USB 3.0 spec Table 10-11 - */ -#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 -#define USB_SS_PORT_STAT_POWER 0x0200 -#define USB_SS_PORT_STAT_SPEED 0x1c00 -#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 - -/* wPortChange bits */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 - -/* - * Changes to wPortChange bit fields in USB 3.0 - * See USB 3.0 spec Table 10-12 - */ -#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 -#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 -#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 - -/* wHubCharacteristics (masks) */ -#define HUB_CHAR_LPSM 0x0003 -#define HUB_CHAR_COMPOUND 0x0004 -#define HUB_CHAR_OCPM 0x0018 - -/* - * Hub Status & Hub Change bit masks - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 - -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - -#endif /*_USB_DEFS_H_ */ |