diff options
Diffstat (limited to 'qemu/roms/u-boot/include/usb')
| -rw-r--r-- | qemu/roms/u-boot/include/usb/ci_udc.h | 14 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/designware_udc.h | 184 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/ehci-fsl.h | 281 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/fotg210.h | 363 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/fusbh200.h | 60 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/lin_gadget_compat.h | 56 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/mpc8xx_udc.h | 178 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/omap1510_udc.h | 174 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/pxa27x_udc.h | 32 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/s3c_udc.h | 112 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/udc.h | 53 | ||||
| -rw-r--r-- | qemu/roms/u-boot/include/usb/ulpi.h | 319 |
12 files changed, 1826 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/usb/ci_udc.h b/qemu/roms/u-boot/include/usb/ci_udc.h new file mode 100644 index 000000000..0dee50461 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/ci_udc.h @@ -0,0 +1,14 @@ +/* + * Copyright 2011, Marvell Semiconductor Inc. + * Lei Wen <leiwen@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#ifndef __CI_UDC_H__ +#define __CI_UDC_H__ + +#define EP_MAX_PACKET_SIZE 0x200 +#define EP0_MAX_PACKET_SIZE 64 +#endif /* __CI_UDC_H__ */ diff --git a/qemu/roms/u-boot/include/usb/designware_udc.h b/qemu/roms/u-boot/include/usb/designware_udc.h new file mode 100644 index 000000000..2e1cdf138 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/designware_udc.h @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2009 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DW_UDC_H +#define __DW_UDC_H + +/* + * Defines for USBD + * + * The udc_ahb controller has three AHB slaves: + * + * 1. THe UDC registers + * 2. The plug detect + * 3. The RX/TX FIFO + */ + +#define MAX_ENDPOINTS 16 + +struct udc_endp_regs { + u32 endp_cntl; + u32 endp_status; + u32 endp_bsorfn; + u32 endp_maxpacksize; + u32 reserved_1; + u32 endp_desc_point; + u32 reserved_2; + u32 write_done; +}; + +/* Endpoint Control Register definitions */ + +#define ENDP_CNTL_STALL 0x00000001 +#define ENDP_CNTL_FLUSH 0x00000002 +#define ENDP_CNTL_SNOOP 0x00000004 +#define ENDP_CNTL_POLL 0x00000008 +#define ENDP_CNTL_CONTROL 0x00000000 +#define ENDP_CNTL_ISO 0x00000010 +#define ENDP_CNTL_BULK 0x00000020 +#define ENDP_CNTL_INT 0x00000030 +#define ENDP_CNTL_NAK 0x00000040 +#define ENDP_CNTL_SNAK 0x00000080 +#define ENDP_CNTL_CNAK 0x00000100 +#define ENDP_CNTL_RRDY 0x00000200 + +/* Endpoint Satus Register definitions */ + +#define ENDP_STATUS_PIDMSK 0x0000000f +#define ENDP_STATUS_OUTMSK 0x00000030 +#define ENDP_STATUS_OUT_NONE 0x00000000 +#define ENDP_STATUS_OUT_DATA 0x00000010 +#define ENDP_STATUS_OUT_SETUP 0x00000020 +#define ENDP_STATUS_IN 0x00000040 +#define ENDP_STATUS_BUFFNAV 0x00000080 +#define ENDP_STATUS_FATERR 0x00000100 +#define ENDP_STATUS_HOSTBUSERR 0x00000200 +#define ENDP_STATUS_TDC 0x00000400 +#define ENDP_STATUS_RXPKTMSK 0x003ff800 + +struct udc_regs { + struct udc_endp_regs in_regs[MAX_ENDPOINTS]; + struct udc_endp_regs out_regs[MAX_ENDPOINTS]; + u32 dev_conf; + u32 dev_cntl; + u32 dev_stat; + u32 dev_int; + u32 dev_int_mask; + u32 endp_int; + u32 endp_int_mask; + u32 reserved_3[0x39]; + u32 reserved_4; /* offset 0x500 */ + u32 udc_endp_reg[MAX_ENDPOINTS]; +}; + +/* Device Configuration Register definitions */ + +#define DEV_CONF_HS_SPEED 0x00000000 +#define DEV_CONF_LS_SPEED 0x00000002 +#define DEV_CONF_FS_SPEED 0x00000003 +#define DEV_CONF_REMWAKEUP 0x00000004 +#define DEV_CONF_SELFPOW 0x00000008 +#define DEV_CONF_SYNCFRAME 0x00000010 +#define DEV_CONF_PHYINT_8 0x00000020 +#define DEV_CONF_PHYINT_16 0x00000000 +#define DEV_CONF_UTMI_BIDIR 0x00000040 +#define DEV_CONF_STATUS_STALL 0x00000080 + +/* Device Control Register definitions */ + +#define DEV_CNTL_RESUME 0x00000001 +#define DEV_CNTL_TFFLUSH 0x00000002 +#define DEV_CNTL_RXDMAEN 0x00000004 +#define DEV_CNTL_TXDMAEN 0x00000008 +#define DEV_CNTL_DESCRUPD 0x00000010 +#define DEV_CNTL_BIGEND 0x00000020 +#define DEV_CNTL_BUFFILL 0x00000040 +#define DEV_CNTL_TSHLDEN 0x00000080 +#define DEV_CNTL_BURSTEN 0x00000100 +#define DEV_CNTL_DMAMODE 0x00000200 +#define DEV_CNTL_SOFTDISCONNECT 0x00000400 +#define DEV_CNTL_SCALEDOWN 0x00000800 +#define DEV_CNTL_BURSTLENU 0x00010000 +#define DEV_CNTL_BURSTLENMSK 0x00ff0000 +#define DEV_CNTL_TSHLDLENU 0x01000000 +#define DEV_CNTL_TSHLDLENMSK 0xff000000 + +/* Device Status Register definitions */ + +#define DEV_STAT_CFG 0x0000000f +#define DEV_STAT_INTF 0x000000f0 +#define DEV_STAT_ALT 0x00000f00 +#define DEV_STAT_SUSP 0x00001000 +#define DEV_STAT_ENUM 0x00006000 +#define DEV_STAT_ENUM_SPEED_HS 0x00000000 +#define DEV_STAT_ENUM_SPEED_FS 0x00002000 +#define DEV_STAT_ENUM_SPEED_LS 0x00004000 +#define DEV_STAT_RXFIFO_EMPTY 0x00008000 +#define DEV_STAT_PHY_ERR 0x00010000 +#define DEV_STAT_TS 0xf0000000 + +/* Device Interrupt Register definitions */ + +#define DEV_INT_MSK 0x0000007f +#define DEV_INT_SETCFG 0x00000001 +#define DEV_INT_SETINTF 0x00000002 +#define DEV_INT_INACTIVE 0x00000004 +#define DEV_INT_USBRESET 0x00000008 +#define DEV_INT_SUSPUSB 0x00000010 +#define DEV_INT_SOF 0x00000020 +#define DEV_INT_ENUM 0x00000040 + +/* Endpoint Interrupt Register definitions */ + +#define ENDP0_INT_CTRLIN 0x00000001 +#define ENDP1_INT_BULKIN 0x00000002 +#define ENDP_INT_NONISOIN_MSK 0x0000AAAA +#define ENDP2_INT_BULKIN 0x00000004 +#define ENDP0_INT_CTRLOUT 0x00010000 +#define ENDP1_INT_BULKOUT 0x00020000 +#define ENDP2_INT_BULKOUT 0x00040000 +#define ENDP_INT_NONISOOUT_MSK 0x55540000 + +/* Endpoint Register definitions */ +#define ENDP_EPDIR_OUT 0x00000000 +#define ENDP_EPDIR_IN 0x00000010 +#define ENDP_EPTYPE_CNTL 0x0 +#define ENDP_EPTYPE_ISO 0x1 +#define ENDP_EPTYPE_BULK 0x2 +#define ENDP_EPTYPE_INT 0x3 + +/* + * Defines for Plug Detect + */ + +struct plug_regs { + u32 plug_state; + u32 plug_pending; +}; + +/* Plug State Register definitions */ +#define PLUG_STATUS_EN 0x1 +#define PLUG_STATUS_ATTACHED 0x2 +#define PLUG_STATUS_PHY_RESET 0x4 +#define PLUG_STATUS_PHY_MODE 0x8 + +/* + * Defines for UDC FIFO (Slave Mode) + */ +struct udcfifo_regs { + u32 *fifo_p; +}; + +/* + * UDC endpoint definitions + */ +#define UDC_EP0 0 +#define UDC_EP1 1 +#define UDC_EP2 2 +#define UDC_EP3 3 + +#endif /* __DW_UDC_H */ diff --git a/qemu/roms/u-boot/include/usb/ehci-fsl.h b/qemu/roms/u-boot/include/usb/ehci-fsl.h new file mode 100644 index 000000000..c9ee1d5bf --- /dev/null +++ b/qemu/roms/u-boot/include/usb/ehci-fsl.h @@ -0,0 +1,281 @@ +/* + * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc + * Copyright (c) 2005 MontaVista Software + * Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EHCI_FSL_H +#define _EHCI_FSL_H + +#include <asm/processor.h> + +/* Global offsets */ +#define FSL_SKIP_PCI 0x100 + +/* offsets for the non-ehci registers in the FSL SOC USB controller */ +#define FSL_SOC_USB_ULPIVP 0x170 +#define FSL_SOC_USB_PORTSC1 0x184 +#define PORT_PTS_MSK (3 << 30) +#define PORT_PTS_UTMI (0 << 30) +#define PORT_PTS_ULPI (2 << 30) +#define PORT_PTS_SERIAL (3 << 30) +#define PORT_PTS_PTW (1 << 28) +#define PORT_PFSC (1 << 24) /* Defined on Page 39-44 of the mpc5151 ERM */ +#define PORT_PTS_PHCD (1 << 23) +#define PORT_PP (1 << 12) +#define PORT_PR (1 << 8) + +/* USBMODE Register bits */ +#define CM_IDLE (0 << 0) +#define CM_RESERVED (1 << 0) +#define CM_DEVICE (2 << 0) +#define CM_HOST (3 << 0) +#define ES_BE (1 << 2) /* Big Endian Select, default is LE */ +#define USBMODE_RESERVED_2 (0 << 2) +#define SLOM (1 << 3) +#define SDIS (1 << 4) + +/* CONTROL Register bits */ +#define ULPI_INT_EN (1 << 0) +#define WU_INT_EN (1 << 1) +#define USB_EN (1 << 2) +#define LSF_EN (1 << 3) +#define KEEP_OTG_ON (1 << 4) +#define OTG_PORT (1 << 5) +#define REFSEL_12MHZ (0 << 6) +#define REFSEL_16MHZ (1 << 6) +#define REFSEL_48MHZ (2 << 6) +#define PLL_RESET (1 << 8) +#define UTMI_PHY_EN (1 << 9) +#define PHY_CLK_SEL_UTMI (0 << 10) +#define PHY_CLK_SEL_ULPI (1 << 10) +#define CLKIN_SEL_USB_CLK (0 << 11) +#define CLKIN_SEL_USB_CLK2 (1 << 11) +#define CLKIN_SEL_SYS_CLK (2 << 11) +#define CLKIN_SEL_SYS_CLK2 (3 << 11) +#define RESERVED_18 (0 << 13) +#define RESERVED_17 (0 << 14) +#define RESERVED_16 (0 << 15) +#define WU_INT (1 << 16) +#define PHY_CLK_VALID (1 << 17) + +#define FSL_SOC_USB_PORTSC2 0x188 + +/* OTG Status Control Register bits */ +#define FSL_SOC_USB_OTGSC 0x1a4 +#define CTRL_VBUS_DISCHARGE (0x1<<0) +#define CTRL_VBUS_CHARGE (0x1<<1) +#define CTRL_OTG_TERMINATION (0x1<<3) +#define CTRL_DATA_PULSING (0x1<<4) +#define CTRL_ID_PULL_EN (0x1<<5) +#define HA_DATA_PULSE (0x1<<6) +#define HA_BA (0x1<<7) +#define STS_USB_ID (0x1<<8) +#define STS_A_VBUS_VALID (0x1<<9) +#define STS_A_SESSION_VALID (0x1<<10) +#define STS_B_SESSION_VALID (0x1<<11) +#define STS_B_SESSION_END (0x1<<12) +#define STS_1MS_TOGGLE (0x1<<13) +#define STS_DATA_PULSING (0x1<<14) +#define INTSTS_USB_ID (0x1<<16) +#define INTSTS_A_VBUS_VALID (0x1<<17) +#define INTSTS_A_SESSION_VALID (0x1<<18) +#define INTSTS_B_SESSION_VALID (0x1<<19) +#define INTSTS_B_SESSION_END (0x1<<20) +#define INTSTS_1MS (0x1<<21) +#define INTSTS_DATA_PULSING (0x1<<22) +#define INTR_USB_ID_EN (0x1<<24) +#define INTR_A_VBUS_VALID_EN (0x1<<25) +#define INTR_A_SESSION_VALID_EN (0x1<<26) +#define INTR_B_SESSION_VALID_EN (0x1<<27) +#define INTR_B_SESSION_END_EN (0x1<<28) +#define INTR_1MS_TIMER_EN (0x1<<29) +#define INTR_DATA_PULSING_EN (0x1<<30) +#define INTSTS_MASK (0x00ff0000) + +/* USBCMD Bits of interest */ +#define EHCI_FSL_USBCMD_RST (1 << 1) +#define EHCI_FSL_USBCMD_RS (1 << 0) + +#define INTERRUPT_ENABLE_BITS_MASK \ + (INTR_USB_ID_EN | \ + INTR_1MS_TIMER_EN | \ + INTR_A_VBUS_VALID_EN | \ + INTR_A_SESSION_VALID_EN | \ + INTR_B_SESSION_VALID_EN | \ + INTR_B_SESSION_END_EN | \ + INTR_DATA_PULSING_EN) + +#define INTERRUPT_STATUS_BITS_MASK \ + (INTSTS_USB_ID | \ + INTR_1MS_TIMER_EN | \ + INTSTS_A_VBUS_VALID | \ + INTSTS_A_SESSION_VALID | \ + INTSTS_B_SESSION_VALID | \ + INTSTS_B_SESSION_END | \ + INTSTS_DATA_PULSING) + +#define FSL_SOC_USB_USBMODE 0x1a8 + +#define USBGENCTRL 0x200 /* NOTE: big endian */ +#define GC_WU_INT_CLR (1 << 5) /* Wakeup int clear */ +#define GC_ULPI_SEL (1 << 4) /* ULPI i/f select (usb0 only)*/ +#define GC_PPP (1 << 3) /* Port Power Polarity */ +#define GC_PFP (1 << 2) /* Power Fault Polarity */ +#define GC_WU_ULPI_EN (1 << 1) /* Wakeup on ULPI event */ +#define GC_WU_IE (1 << 1) /* Wakeup interrupt enable */ + +#define ISIPHYCTRL 0x204 /* NOTE: big endian */ +#define PHYCTRL_PHYE (1 << 4) /* On-chip UTMI PHY enable */ +#define PHYCTRL_BSENH (1 << 3) /* Bit Stuff Enable High */ +#define PHYCTRL_BSEN (1 << 2) /* Bit Stuff Enable */ +#define PHYCTRL_LSFE (1 << 1) /* Line State Filter Enable */ +#define PHYCTRL_PXE (1 << 0) /* PHY oscillator enable */ + +#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */ +#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */ +#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */ +#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ +#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ +#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define SNOOP_SIZE_2GB 0x1e + +/* System Clock Control Register */ +#define MPC83XX_SCCR_USB_MASK 0x00f00000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +#if defined(CONFIG_MPC83xx) +#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC83xx_USB1_ADDR +#if defined(CONFIG_MPC834x) +#define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC83xx_USB2_ADDR +#else +#define CONFIG_SYS_FSL_USB2_ADDR 0 +#endif +#elif defined(CONFIG_MPC85xx) +#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR +#define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR +#elif defined(CONFIG_MPC512X) +#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR +#define CONFIG_SYS_FSL_USB2_ADDR 0 +#endif + +/* + * Increasing TX FIFO threshold value from 2 to 4 decreases + * data burst rate with which data packets are posted from the TX + * latency FIFO to compensate for latencies in DDR pipeline during DMA + */ +#define TXFIFOTHRESH 4 + +/* + * USB Registers + */ +struct usb_ehci { + u32 id; /* 0x000 - Identification register */ + u32 hwgeneral; /* 0x004 - General hardware parameters */ + u32 hwhost; /* 0x008 - Host hardware parameters */ + u32 hwdevice; /* 0x00C - Device hardware parameters */ + u32 hwtxbuf; /* 0x010 - TX buffer hardware parameters */ + u32 hwrxbuf; /* 0x014 - RX buffer hardware parameters */ + u8 res1[0x68]; + u32 gptimer0_ld; /* 0x080 - General Purpose Timer 0 load value */ + u32 gptimer0_ctrl; /* 0x084 - General Purpose Timer 0 control */ + u32 gptimer1_ld; /* 0x088 - General Purpose Timer 1 load value */ + u32 gptimer1_ctrl; /* 0x08C - General Purpose Timer 1 control */ + u32 sbuscfg; /* 0x090 - System Bus Interface Control */ + u8 res2[0x6C]; + u8 caplength; /* 0x100 - Capability Register Length */ + u8 res3[0x1]; + u16 hciversion; /* 0x102 - Host Interface Version */ + u32 hcsparams; /* 0x104 - Host Structural Parameters */ + u32 hccparams; /* 0x108 - Host Capability Parameters */ + u8 res4[0x14]; + u32 dciversion; /* 0x120 - Device Interface Version */ + u32 dciparams; /* 0x124 - Device Controller Params */ + u8 res5[0x18]; + u32 usbcmd; /* 0x140 - USB Command */ + u32 usbsts; /* 0x144 - USB Status */ + u32 usbintr; /* 0x148 - USB Interrupt Enable */ + u32 frindex; /* 0x14C - USB Frame Index */ + u8 res6[0x4]; + u32 perlistbase; /* 0x154 - Periodic List Base + - USB Device Address */ + u32 ep_list_addr; /* 0x158 - Next Asynchronous List + - End Point Address */ + u8 res7[0x4]; + u32 burstsize; /* 0x160 - Programmable Burst Size */ +#define FSL_EHCI_TXPBURST(X) ((X) << 8) +#define FSL_EHCI_RXPBURST(X) (X) + u32 txfilltuning; /* 0x164 - Host TT Transmit + pre-buffer packet tuning */ + u8 res8[0x8]; + u32 ulpi_viewpoint; /* 0x170 - ULPI Reister Access */ + u8 res9[0xc]; + u32 config_flag; /* 0x180 - Configured Flag Register */ + u32 portsc; /* 0x184 - Port status/control */ + u8 res10[0x1C]; + u32 otgsc; /* 0x1a4 - Oo-The-Go status and control */ + u32 usbmode; /* 0x1a8 - USB Device Mode */ + u32 epsetupstat; /* 0x1ac - End Point Setup Status */ + u32 epprime; /* 0x1b0 - End Point Init Status */ + u32 epflush; /* 0x1b4 - End Point De-initlialize */ + u32 epstatus; /* 0x1b8 - End Point Status */ + u32 epcomplete; /* 0x1bc - End Point Complete */ + u32 epctrl0; /* 0x1c0 - End Point Control 0 */ + u32 epctrl1; /* 0x1c4 - End Point Control 1 */ + u32 epctrl2; /* 0x1c8 - End Point Control 2 */ + u32 epctrl3; /* 0x1cc - End Point Control 3 */ + u32 epctrl4; /* 0x1d0 - End Point Control 4 */ + u32 epctrl5; /* 0x1d4 - End Point Control 5 */ + u8 res11[0x28]; + u32 usbgenctrl; /* 0x200 - USB General Control */ + u32 isiphyctrl; /* 0x204 - On-Chip PHY Control */ + u8 res12[0x1F8]; + u32 snoop1; /* 0x400 - Snoop 1 */ + u32 snoop2; /* 0x404 - Snoop 2 */ + u32 age_cnt_limit; /* 0x408 - Age Count Threshold */ + u32 prictrl; /* 0x40c - Priority Control */ + u32 sictrl; /* 0x410 - System Interface Control */ + u8 res13[0xEC]; + u32 control; /* 0x500 - Control */ + u8 res14[0xafc]; +}; + +/* + * For MXC SOCs + */ + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) + +/* Board-specific initialization */ +int board_ehci_hcd_init(int port); + +#endif /* _EHCI_FSL_H */ diff --git a/qemu/roms/u-boot/include/usb/fotg210.h b/qemu/roms/u-boot/include/usb/fotg210.h new file mode 100644 index 000000000..b83e8f593 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/fotg210.h @@ -0,0 +1,363 @@ +/* + * Faraday USB 2.0 OTG Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FOTG210_H +#define _FOTG210_H + +struct fotg210_regs { + /* USB Host Controller */ + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t rsvd1[3]; + uint32_t miscr; /* 0x40: Miscellaneous Register */ + uint32_t rsvd2[15]; + /* USB OTG Controller */ + uint32_t otgcsr;/* 0x80: OTG Control Status Register */ + uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */ + uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */ + uint32_t rsvd3[13]; + uint32_t isr; /* 0xC0: Global Interrupt Status Register */ + uint32_t imr; /* 0xC4: Global Interrupt Mask Register */ + uint32_t rsvd4[14]; + /* USB Device Controller */ + uint32_t dev_ctrl;/* 0x100: Device Control Register */ + uint32_t dev_addr;/* 0x104: Device Address Register */ + uint32_t dev_test;/* 0x108: Device Test Register */ + uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */ + uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */ + uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */ + uint32_t rsvd5[2]; + uint32_t cxfifo;/* 0x120: CX FIFO Register */ + uint32_t idle; /* 0x124: IDLE Counter Register */ + uint32_t rsvd6[2]; + uint32_t gimr; /* 0x130: Group Interrupt Mask Register */ + uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */ + uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */ + uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */ + uint32_t gisr; /* 0x140: Group Interrupt Status Register */ + uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */ + uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */ + uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */ + uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */ + uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */ + uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */ + uint32_t rsvd7[1]; + uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */ + uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */ + uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */ + uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */ + uint32_t fifomap;/* 0x1a8: FIFO Map Register */ + uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */ + uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */ + uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */ + uint32_t rsvd8[1]; + uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */ + uint32_t dma_addr; /* 0x1cc: DMA Address Register */ + uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */ +}; + +/* Miscellaneous Register */ +#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */ +#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* OTG Control Status Register */ +#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */ +#define OTGCSR_SPD_LOW (1 << 22) +#define OTGCSR_SPD_FULL (0 << 22) +#define OTGCSR_SPD_MASK (3 << 22) +#define OTGCSR_SPD_SHIFT 22 +#define OTGCSR_SPD(x) (((x) >> 22) & 0x03) +#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */ +#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */ +#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */ +#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */ +#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */ +#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */ +#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */ +#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */ +#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/ +#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/ +#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/ +#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/ +#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/ +#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/ +#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */ +#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */ +#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */ +#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */ +#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */ +#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */ +#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */ +#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */ +#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */ + +/* OTG Interrupt Status Register */ +#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGISR_OVD (1 << 10) /* over-current detected */ +#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */ + +/* OTG Interrupt Enable Register */ +#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */ +#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */ +#define OTGIER_OVD (1 << 10) /* over-current detected */ +#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */ +#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */ +#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */ +#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */ +#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */ +#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */ + +/* Global Interrupt Status Register (W1C) */ +#define ISR_HOST (1 << 2) /* USB Host interrupt */ +#define ISR_OTG (1 << 1) /* USB OTG interrupt */ +#define ISR_DEV (1 << 0) /* USB Device interrupt */ +#define ISR_MASK 0x07 + +/* Global Interrupt Mask Register */ +#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */ +#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */ +#define IMR_HOST (1 << 2) /* USB Host interrupt */ +#define IMR_OTG (1 << 1) /* USB OTG interrupt */ +#define IMR_DEV (1 << 0) /* USB Device interrupt */ +#define IMR_MASK 0x0f + +/* Device Control Register */ +#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */ +#define DEVCTRL_HS (1 << 6) /* High Speed Mode */ +#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */ +#define DEVCTRL_EN (1 << 5) /* Chip Enable */ +#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */ +#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */ +#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */ +#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */ +#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */ + +/* Device Address Register */ +#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */ +#define DEVADDR_ADDR(x) ((x) & 0x7f) +#define DEVADDR_ADDR_MASK 0x7f + +/* Device Test Register */ +#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */ +#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */ +#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */ +#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */ +#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */ +#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */ +#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */ + +/* SOF Frame Number Register */ +#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */ +#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */ + +/* SOF Mask Timer Register */ +#define SOFMTR_TMR(x) ((x) & 0xffff) + +/* PHY Test Mode Selector Register */ +#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */ +#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */ +#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */ +#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */ +#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */ + +/* CX FIFO Register */ +#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */ +#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */ +#define CXFIFO_FIFOE_FIFO0 (1 << 8) +#define CXFIFO_FIFOE_FIFO1 (1 << 9) +#define CXFIFO_FIFOE_FIFO2 (1 << 10) +#define CXFIFO_FIFOE_FIFO3 (1 << 11) +#define CXFIFO_FIFOE_MASK (0x0f << 8) +#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */ +#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */ +#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */ +#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */ +#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */ +#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */ + +/* IDLE Counter Register */ +#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */ + +/* Group Interrupt Mask(Disable) Register */ +#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */ +#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */ +#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */ +#define GIMR_MASK 0x07 + +/* Group Interrupt Mask(Disable) Register 0 (CX) */ +#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ +#define GIMR0_MASK 0x3f + +/* Group Interrupt Mask(Disable) Register 1 (FIFO) */ +#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */ +#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x) +#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */ +#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */ +#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x)) +#define GIMR1_MASK 0xf00ff + +/* Group Interrupt Mask(Disable) Register 2 (Device) */ +#define GIMR2_WAKEUP (1 << 10) /* Device waked up */ +#define GIMR2_IDLE (1 << 9) /* Device idle */ +#define GIMR2_DMAERR (1 << 8) /* DMA error */ +#define GIMR2_DMAFIN (1 << 7) /* DMA finished */ +#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GIMR2_RESET (1 << 0) /* Reset Interrupt */ +#define GIMR2_MASK 0x7ff + +/* Group Interrupt Status Register */ +#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */ +#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */ +#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */ + +/* Group Interrupt Status Register 0 (CX) */ +#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */ +#define GISR0_CXERR (1 << 4) /* CX command error interrupt */ +#define GISR0_CXEND (1 << 3) /* CX command end interrupt */ +#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */ +#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */ +#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */ + +/* Group Interrupt Status Register 1 (FIFO) */ +#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */ +#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */ +#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */ +#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */ + +/* Group Interrupt Status Register 2 (Device) */ +#define GISR2_WAKEUP (1 << 10) /* Device waked up */ +#define GISR2_IDLE (1 << 9) /* Device idle */ +#define GISR2_DMAERR (1 << 8) /* DMA error */ +#define GISR2_DMAFIN (1 << 7) /* DMA finished */ +#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */ +#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */ +#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */ +#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */ +#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */ +#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */ +#define GISR2_RESET (1 << 0) /* Reset Interrupt */ + +/* Receive Zero-Length-Packet Register */ +#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */ + +/* Transfer Zero-Length-Packet Register */ +#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */ + +/* ISOC Error/Abort Status Register */ +#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */ + +/* IN Endpoint Register */ +#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */ +#define IEP_TNRHB(x) (((x) & 0x03) << 13) \ + /* Transaction Number for High-Bandwidth EP(ISOC) */ +#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define IEP_STALL (1 << 11) /* Stall */ +#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* OUT Endpoint Register */ +#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */ +#define OEP_STALL (1 << 11) /* Stall */ +#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */ + +/* Endpoint Map Register (EP1 ~ EP4) */ +#define EPMAP14_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 0) +#define EPMAP14_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 1) << 3 + 4) +#define EPMAP14_SET(ep, in, out) \ + do { \ + EPMAP14_SET_IN(ep, in); \ + EPMAP14_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */ + +/* Endpoint Map Register (EP5 ~ EP8) */ +#define EPMAP58_SET_IN(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 0) +#define EPMAP58_SET_OUT(ep, fifo) \ + ((fifo) & 3) << (((ep) - 5) << 3 + 4) +#define EPMAP58_SET(ep, in, out) \ + do { \ + EPMAP58_SET_IN(ep, in); \ + EPMAP58_SET_OUT(ep, out); \ + } while (0) + +#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */ + +/* FIFO Map Register */ +#define FIFOMAP_BIDIR (2 << 4) +#define FIFOMAP_IN (1 << 4) +#define FIFOMAP_OUT (0 << 4) +#define FIFOMAP_DIR_MASK 0x30 +#define FIFOMAP_EP(x) ((x) & 0x0f) +#define FIFOMAP_EP_MASK 0x0f +#define FIFOMAP_CFG_MASK 0x3f +#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */ +#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Configuration Register */ +#define FIFOCFG_EN (1 << 5) +#define FIFOCFG_BLKSZ_1024 (1 << 4) +#define FIFOCFG_BLKSZ_512 (0 << 4) +#define FIFOCFG_3BLK (2 << 2) +#define FIFOCFG_2BLK (1 << 2) +#define FIFOCFG_1BLK (0 << 2) +#define FIFOCFG_NBLK_MASK 3 +#define FIFOCFG_NBLK_SHIFT 2 +#define FIFOCFG_INTR (3 << 0) +#define FIFOCFG_BULK (2 << 0) +#define FIFOCFG_ISOC (1 << 0) +#define FIFOCFG_RSVD (0 << 0) /* Reserved */ +#define FIFOCFG_TYPE_MASK 3 +#define FIFOCFG_TYPE_SHIFT 0 +#define FIFOCFG_CFG_MASK 0x3f +#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3)) + +/* FIFO Control Status Register */ +#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */ +#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */ + +/* DMA Target FIFO Register */ +#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */ +#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */ + +/* DMA Control Register */ +#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */ +#define DMACTRL_LEN_SHIFT 8 +#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */ +#define DMACTRL_ABORT (1 << 3) /* DMA abort */ +#define DMACTRL_IO2IO (1 << 2) /* IO to IO */ +#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */ +#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */ +#define DMACTRL_START (1 << 0) /* DMA start */ + +#endif diff --git a/qemu/roms/u-boot/include/usb/fusbh200.h b/qemu/roms/u-boot/include/usb/fusbh200.h new file mode 100644 index 000000000..e2d855365 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/fusbh200.h @@ -0,0 +1,60 @@ +/* + * Faraday USB 2.0 EHCI Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FUSBH200_H +#define _FUSBH200_H + +struct fusbh200_regs { + struct { + uint32_t data[4]; + } hccr; /* 0x00 - 0x0f: hccr */ + struct { + uint32_t data[9]; + } hcor; /* 0x10 - 0x33: hcor */ + uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */ + uint32_t rsvd[2]; + uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */ + uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */ + uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */ +}; + +/* EOF & Async. Schedule Sleep Timer Register */ +#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */ +#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */ +#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */ +#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */ +#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */ + +/* Bus Monitor Control Status Register */ +#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */ +#define BMCSR_SPD_LOW (1 << 9) +#define BMCSR_SPD_FULL (0 << 9) +#define BMCSR_SPD_MASK (3 << 9) +#define BMCSR_SPD_SHIFT 9 +#define BMCSR_SPD(x) ((x >> 9) & 0x03) +#define BMCSR_VBUS (1 << 8) /* VBUS Valid */ +#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */ +#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */ +#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */ +#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */ +#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */ +#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/ +#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/ +#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/ +#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/ + +/* Bus Monitor Interrupt Status Register */ +/* Bus Monitor Interrupt Enable Register */ +#define BMISR_DMAERR (1 << 4) /* DMA error */ +#define BMISR_DMA (1 << 3) /* DMA complete */ +#define BMISR_DEVRM (1 << 2) /* device removed */ +#define BMISR_OVD (1 << 1) /* over-current detected */ +#define BMISR_VBUSERR (1 << 0) /* VBUS error */ + +#endif diff --git a/qemu/roms/u-boot/include/usb/lin_gadget_compat.h b/qemu/roms/u-boot/include/usb/lin_gadget_compat.h new file mode 100644 index 000000000..a25e9d9ef --- /dev/null +++ b/qemu/roms/u-boot/include/usb/lin_gadget_compat.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2011 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * This is a Linux kernel compatibility layer for USB Gadget + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LIN_COMPAT_H__ +#define __LIN_COMPAT_H__ + +#include <linux/compat.h> + +/* common */ +#define spin_lock_init(...) +#define spin_lock(...) +#define spin_lock_irqsave(lock, flags) do { debug("%lu\n", flags); } while (0) +#define spin_unlock(...) +#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0) +#define disable_irq(...) +#define enable_irq(...) + +#define mutex_init(...) +#define mutex_lock(...) +#define mutex_unlock(...) + +#define GFP_KERNEL 0 + +#define IRQ_HANDLED 1 + +#define ENOTSUPP 524 /* Operation is not supported */ + +#define BITS_PER_BYTE 8 +#define BITS_TO_LONGS(nr) \ + DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) +#define DECLARE_BITMAP(name, bits) \ + unsigned long name[BITS_TO_LONGS(bits)] + +#define small_const_nbits(nbits) \ + (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG) + +static inline void bitmap_zero(unsigned long *dst, int nbits) +{ + if (small_const_nbits(nbits)) + *dst = 0UL; + else { + int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); + memset(dst, 0, len); + } +} + +#define dma_cache_maint(addr, size, mode) cache_flush() +void cache_flush(void); + +#endif /* __LIN_COMPAT_H__ */ diff --git a/qemu/roms/u-boot/include/usb/mpc8xx_udc.h b/qemu/roms/u-boot/include/usb/mpc8xx_udc.h new file mode 100644 index 000000000..9906c75f6 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/mpc8xx_udc.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit + * bodonoghue@codehermit.ie + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <commproc.h> + +/* Mode Register */ +#define USMOD_EN 0x01 +#define USMOD_HOST 0x02 +#define USMOD_TEST 0x04 +#define USMOD_SFTE 0x08 +#define USMOD_RESUME 0x40 +#define USMOD_LSS 0x80 + +/* Endpoint Registers */ +#define USEP_RHS_NORM 0x00 +#define USEP_RHS_IGNORE 0x01 +#define USEP_RHS_NAK 0x02 +#define USEP_RHS_STALL 0x03 + +#define USEP_THS_NORM 0x00 +#define USEP_THS_IGNORE 0x04 +#define USEP_THS_NAK 0x08 +#define USEP_THS_STALL 0x0C + +#define USEP_RTE 0x10 +#define USEP_MF 0x20 + +#define USEP_TM_CONTROL 0x00 +#define USEP_TM_INT 0x100 +#define USEP_TM_BULK 0x200 +#define USEP_TM_ISO 0x300 + +/* Command Register */ +#define USCOM_EP0 0x00 +#define USCOM_EP1 0x01 +#define USCOM_EP2 0x02 +#define USCOM_EP3 0x03 + +#define USCOM_FLUSH 0x40 +#define USCOM_STR 0x80 + +/* Event Register */ +#define USB_E_RXB 0x0001 +#define USB_E_TXB 0x0002 +#define USB_E_BSY 0x0004 +#define USB_E_SOF 0x0008 +#define USB_E_TXE1 0x0010 +#define USB_E_TXE2 0x0020 +#define USB_E_TXE3 0x0040 +#define USB_E_TXE4 0x0080 +#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4) +#define USB_E_IDLE 0x0100 +#define USB_E_RESET 0x0200 + +/* Mask Register */ +#define USBS_IDLE 0x01 + +/* RX Buffer Descriptor */ +#define RX_BD_OV 0x02 +#define RX_BD_CR 0x04 +#define RX_BD_AB 0x08 +#define RX_BD_NO 0x10 +#define RX_BD_PID_DATA0 0x00 +#define RX_BD_PID_DATA1 0x40 +#define RX_BD_PID_SETUP 0x80 +#define RX_BD_F 0x400 +#define RX_BD_L 0x800 +#define RX_BD_I 0x1000 +#define RX_BD_W 0x2000 +#define RX_BD_E 0x8000 + +/* Useful masks */ +#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP) +#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL) +#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK) +#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF) + +/* TX Buffer Descriptor */ +#define TX_BD_UN 0x02 +#define TX_BD_TO 0x04 +#define TX_BD_NO_PID 0x00 +#define TX_BD_PID_DATA0 0x80 +#define TX_BD_PID_DATA1 0xC0 +#define TX_BD_CNF 0x200 +#define TX_BD_TC 0x400 +#define TX_BD_L 0x800 +#define TX_BD_I 0x1000 +#define TX_BD_W 0x2000 +#define TX_BD_R 0x8000 + +/* Implementation specific defines */ + +#define EP_MIN_PACKET_SIZE 0x08 +#define MAX_ENDPOINTS 0x04 +#define FIFO_SIZE 0x10 +#define EP_MAX_PKT FIFO_SIZE +#define TX_RING_SIZE 0x04 +#define RX_RING_SIZE 0x06 +#define USB_MAX_PKT 0x40 +#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80 +#define TOGGLE_RX_PID(x) x^= 0x40 +#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */ +#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */ + +#define PROFF_USB 0x00000000 +#define CPM_USB_BASE 0x00000A00 + +/* UDC device defines */ +#define EP0_MAX_PACKET_SIZE EP_MAX_PKT + +#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE +#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE +#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE + +struct mpc8xx_ep { + struct urb * urb; + unsigned char pid; + unsigned char sc; + volatile cbd_t * prx; +}; + +typedef struct mpc8xx_usb{ + char usmod; /* Mode Register */ + char usaddr; /* Slave Address Register */ + char uscom; /* Command Register */ + char res1; /* Reserved */ + ushort usep[4]; + ulong res2; /* Reserved */ + ushort usber; /* Event Register */ + ushort res3; /* Reserved */ + ushort usbmr; /* Mask Register */ + char res4; /* Reserved */ + char usbs; /* Status Register */ + char res5[8]; /* Reserved */ +}usb_t; + +typedef struct mpc8xx_parameter_ram{ + ushort ep0ptr; /* Endpoint Pointer Register 0 */ + ushort ep1ptr; /* Endpoint Pointer Register 1 */ + ushort ep2ptr; /* Endpoint Pointer Register 2 */ + ushort ep3ptr; /* Endpoint Pointer Register 3 */ + uint rstate; /* Receive state */ + uint rptr; /* Receive internal data pointer */ + ushort frame_n; /* Frame number */ + ushort rbcnt; /* Receive byte count */ + uint rtemp; /* Receive temp cp use only */ + uint rxusb; /* Rx Data Temp */ + ushort rxuptr; /* Rx microcode return address temp */ +}usb_pram_t; + +typedef struct endpoint_parameter_block_pointer{ + ushort rbase; /* RxBD base address */ + ushort tbase; /* TxBD base address */ + char rfcr; /* Rx Function code */ + char tfcr; /* Tx Function code */ + ushort mrblr; /* Maximum Receive Buffer Length */ + ushort rbptr; /* RxBD pointer Next Buffer Descriptor */ + ushort tbptr; /* TxBD pointer Next Buffer Descriptor */ + ulong tstate; /* Transmit internal state */ + ulong tptr; /* Transmit internal data pointer */ + ushort tcrc; /* Transmit temp CRC */ + ushort tbcnt; /* Transmit internal bye count */ + ulong ttemp; /* Tx temp */ + ushort txuptr; /* Tx microcode return address */ + ushort res1; /* Reserved */ +}usb_epb_t; + +typedef enum mpc8xx_udc_state{ + STATE_NOT_READY, + STATE_ERROR, + STATE_READY, +}mpc8xx_udc_state_t; + diff --git a/qemu/roms/u-boot/include/usb/omap1510_udc.h b/qemu/roms/u-boot/include/usb/omap1510_udc.h new file mode 100644 index 000000000..adfbf5499 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/omap1510_udc.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * + * Based on + * linux/drivers/usb/device/bi/omap.h + * Register definitions for TI OMAP1510 USB bus interface driver + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __USBDCORE_OMAP1510_H__ +#define __USBDCORE_OMAP1510_H__ + + +/* + * 13.2 MPU Register Map + */ + +/* Table 13-1. USB Function Module Registers (endpoint) */ +#define UDC_BASE 0xFFFB4000 +#define UDC_OFFSET(offset) (UDC_BASE + (offset)) +#define UDC_REV UDC_OFFSET(0x0) /* Revision */ +#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */ +#define UDC_DATA UDC_OFFSET(0x08) /* Data */ +#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */ +#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */ +#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */ +#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */ +#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */ +#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */ +#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */ +#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */ +#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */ +#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */ +#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */ +#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */ + +/* IRQ_EN register fields */ +#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */ +#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */ +#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */ +#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */ +#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */ + +/* IRQ_SRC register fields */ +#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */ +#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */ +#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */ +#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */ +#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */ +#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */ +#define UDC_DS_Chg (1 << 3) /* Device state changed */ +#define UDC_Setup (1 << 2) /* Setup transaction */ +#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */ +#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */ + +/* DEVSTAT register fields, 14.2.9 */ +#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */ +#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */ +#define UDC_SUS (1 << 4) /* Suspended state */ +#define UDC_CFG (1 << 3) /* Configured state */ +#define UDC_ADD (1 << 2) /* Addressed state */ +#define UDC_DEF (1 << 1) /* Default state */ +#define UDC_ATT (1 << 0) /* Attached state */ + +/* SYSCON1 register fields */ +#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */ +#define UDC_Nak_En (1 << 4) /* NAK enable */ +#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */ +#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */ +#define UDC_Pullup_En (1 << 0) /* External pullup enabled */ + +/* SYSCON2 register fields */ +#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */ +#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */ +#define UDC_Dev_Cfg (1 << 3) /* Device configured */ +#define UDC_Clr_Cfg (1 << 2) /* Clear configured */ + +/* + * Select and enable endpoints + */ + +/* Table 13-1. USB Function Module Registers (endpoint configuration) */ +#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */ +#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */ +#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */ +#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4) +#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */ +#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4) + +/* EP_NUM register fields */ +#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */ +#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */ +#define UDC_EP_Dir (1 << 4) /* Endpoint direction */ + +/* CTRL register fields */ +#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */ +#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */ +#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */ +#define UDC_Clr_EP (1 << 1) /* Clear endpoint */ +#define UDC_Reset_EP (1 << 0) /* Reset endpoint */ + +/* STAT_FLG register fields */ +#define UDC_Miss_In (1 << 14) +#define UDC_Data_Flush (1 << 13) +#define UDC_ISO_Err (1 << 12) +#define UDC_ISO_FIFO_Empty (1 << 9) +#define UDC_ISO_FIFO_Full (1 << 8) +#define UDC_EP_Halted (1 << 6) +#define UDC_STALL (1 << 5) +#define UDC_NAK (1 << 4) +#define UDC_ACK (1 << 3) +#define UDC_FIFO_En (1 << 2) +#define UDC_Non_ISO_FIFO_Empty (1 << 1) +#define UDC_Non_ISO_FIFO_Full (1 << 0) + +/* EPn_RX register fields */ +#define UDC_EPn_RX_Valid (1 << 15) /* valid */ +#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */ +#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */ + +/* EPn_TX register fields */ +#define UDC_EPn_TX_Valid (1 << 15) /* valid */ +#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */ +#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */ + +#define EP0_PACKETSIZE 0x40 + +/* physical to logical endpoint mapping + * Physical endpoints are an index into device->bus->endpoint_array. + * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in + * the USB specification. + * + * physical ep logical ep direction endpoint_address + * 0 0 IN and OUT 0x00 + * 1 to 15 1 to 15 OUT 0x01 to 0x0f + * 16 to 30 1 to 15 IN 0x81 to 0x8f + */ +#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80)) +#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a)) + +/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */ +#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17) + +/* Other registers (may be) related to USB */ + +#define CLOCK_CTRL (0xFFFE0830) +#define APLL_CTRL (0xFFFE084C) +#define DPLL_CTRL (0xFFFE083C) +#define SOFT_REQ (0xFFFE0834) +#define STATUS_REQ (0xFFFE0840) + +/* FUNC_MUX_CTRL_0 bits related to USB */ +#define UDC_VBUS_CTRL (1 << 19) +#define UDC_VBUS_MODE (1 << 18) + +/* OMAP Endpoint parameters */ +#define UDC_OUT_PACKET_SIZE 64 +#define UDC_IN_PACKET_SIZE 64 +#define UDC_INT_PACKET_SIZE 16 +#define UDC_BULK_PACKET_SIZE 16 + +#define UDC_INT_ENDPOINT 5 +#define UDC_OUT_ENDPOINT 2 +#define UDC_IN_ENDPOINT 1 + +#endif diff --git a/qemu/roms/u-boot/include/usb/pxa27x_udc.h b/qemu/roms/u-boot/include/usb/pxa27x_udc.h new file mode 100644 index 000000000..7eaa00030 --- /dev/null +++ b/qemu/roms/u-boot/include/usb/pxa27x_udc.h @@ -0,0 +1,32 @@ +/* + * PXA27x register declarations and HCD data structures + * + * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> + * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#ifndef __PXA270X_UDC_H__ +#define __PXA270X_UDC_H__ + +#include <asm/byteorder.h> + +/* Endpoint 0 states */ +#define EP0_IDLE 0 +#define EP0_IN_DATA 1 +#define EP0_OUT_DATA 2 +#define EP0_XFER_COMPLETE 3 + + +/* Endpoint parameters */ +#define MAX_ENDPOINTS 4 + +#define EP0_MAX_PACKET_SIZE 16 + +#define UDC_OUT_ENDPOINT 0x02 +#define UDC_IN_ENDPOINT 0x01 +#define UDC_INT_ENDPOINT 0x05 + +#endif diff --git a/qemu/roms/u-boot/include/usb/s3c_udc.h b/qemu/roms/u-boot/include/usb/s3c_udc.h new file mode 100644 index 000000000..70e48f88e --- /dev/null +++ b/qemu/roms/u-boot/include/usb/s3c_udc.h @@ -0,0 +1,112 @@ +/* + * drivers/usb/gadget/s3c_udc.h + * Samsung S3C on-chip full/high speed USB device controllers + * Copyright (C) 2005 for Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __S3C_USB_GADGET +#define __S3C_USB_GADGET + +#include <asm/errno.h> +#include <linux/sizes.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/list.h> +#include <usb/lin_gadget_compat.h> + +#define PHY0_SLEEP (1 << 5) + +/*-------------------------------------------------------------------------*/ +/* DMA bounce buffer size, 16K is enough even for mass storage */ +#define DMA_BUFFER_SIZE (16*SZ_1K) + +#define EP0_FIFO_SIZE 64 +#define EP_FIFO_SIZE 512 +#define EP_FIFO_SIZE2 1024 +/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */ +#define S3C_MAX_ENDPOINTS 4 +#define S3C_MAX_HW_ENDPOINTS 16 + +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 +#define WAIT_FOR_COMPLETE 5 +#define WAIT_FOR_OUT_COMPLETE 6 +#define WAIT_FOR_IN_COMPLETE 7 +#define WAIT_FOR_NULL_COMPLETE 8 + +#define TEST_J_SEL 0x1 +#define TEST_K_SEL 0x2 +#define TEST_SE0_NAK_SEL 0x3 +#define TEST_PACKET_SEL 0x4 +#define TEST_FORCE_ENABLE_SEL 0x5 + +/* ************************************************************************* */ +/* IO + */ + +enum ep_type { + ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt +}; + +struct s3c_ep { + struct usb_ep ep; + struct s3c_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + int len; + void *dma_buf; + + u8 stopped; + u8 bEndpointAddress; + u8 bmAttributes; + + enum ep_type ep_type; + int fifo_num; +}; + +struct s3c_request { + struct usb_request req; + struct list_head queue; +}; + +struct s3c_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct s3c_plat_otg_data *pdata; + + int ep0state; + struct s3c_ep ep[S3C_MAX_ENDPOINTS]; + + unsigned char usb_address; + + unsigned req_pending:1, req_std:1; +}; + +extern struct s3c_udc *the_controller; + +#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN) +#define ep_index(EP) ((EP)->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) + +extern void otg_phy_init(struct s3c_udc *dev); +extern void otg_phy_off(struct s3c_udc *dev); + +extern void s3c_udc_ep_set_stall(struct s3c_ep *ep); +extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata); + +struct s3c_plat_otg_data { + int (*phy_control)(int on); + unsigned int regs_phy; + unsigned int regs_otg; + unsigned int usb_phy_ctrl; + unsigned int usb_flags; +}; +#endif diff --git a/qemu/roms/u-boot/include/usb/udc.h b/qemu/roms/u-boot/include/usb/udc.h new file mode 100644 index 000000000..1f545ec1b --- /dev/null +++ b/qemu/roms/u-boot/include/usb/udc.h @@ -0,0 +1,53 @@ +/* + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef USB_UDC_H +#define USB_UDC_H + +#ifndef EP0_MAX_PACKET_SIZE +#define EP0_MAX_PACKET_SIZE 64 +#endif + +#ifndef EP_MAX_PACKET_SIZE +#define EP_MAX_PACKET_SIZE 64 +#endif + +#if !defined(CONFIG_PPC) && !defined(CONFIG_OMAP1510) +/* omap1510_udc.h and mpc8xx_udc.h will set these values */ +#define UDC_OUT_PACKET_SIZE EP_MAX_PACKET_SIZE +#define UDC_IN_PACKET_SIZE EP_MAX_PACKET_SIZE +#define UDC_INT_PACKET_SIZE EP_MAX_PACKET_SIZE +#define UDC_BULK_PACKET_SIZE EP_MAX_PACKET_SIZE +#endif + +#define UDC_BULK_HS_PACKET_SIZE 512 + +#ifndef UDC_INT_ENDPOINT +#define UDC_INT_ENDPOINT 1 +#endif + +#ifndef UDC_OUT_ENDPOINT +#define UDC_OUT_ENDPOINT 2 +#endif + +#ifndef UDC_IN_ENDPOINT +#define UDC_IN_ENDPOINT 3 +#endif + +/* function declarations */ +int udc_init(void); +void udc_irq(void); +int udc_endpoint_write(struct usb_endpoint_instance *endpoint); +void udc_setup_ep(struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *endpoint); +void udc_connect(void); +void udc_disconnect(void); +void udc_enable(struct usb_device_instance *device); +void udc_disable(void); +void udc_startup_events(struct usb_device_instance *device); + +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak(int epid); + +#endif diff --git a/qemu/roms/u-boot/include/usb/ulpi.h b/qemu/roms/u-boot/include/usb/ulpi.h new file mode 100644 index 000000000..99166c44a --- /dev/null +++ b/qemu/roms/u-boot/include/usb/ulpi.h @@ -0,0 +1,319 @@ +/* + * Generic ULPI interface. + * + * Copyright (C) 2011 Jana Rapava <fermata7@gmail.com> + * Copyright (C) 2011 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Jana Rapava <fermata7@gmail.com> + * Igor Grinberg <grinberg@compulab.co.il> + * + * Register offsets taken from: + * linux/include/linux/usb/ulpi.h + * + * Original Copyrights follow: + * Copyright (C) 2010 Nokia Corporation + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * version 2 of that License. + */ + +#ifndef __USB_ULPI_H__ +#define __USB_ULPI_H__ + +#define ULPI_ERROR (1 << 8) /* overflow from any register value */ + +#ifndef CONFIG_USB_ULPI_TIMEOUT +#define CONFIG_USB_ULPI_TIMEOUT 1000 /* timeout in us */ +#endif + +/* + * ulpi view port address and + * Port_number that can be passed. + * Any additional data to be passed can + * be extended from this structure + */ +struct ulpi_viewport { + u32 viewport_addr; + u32 port_num; +}; + +/* + * Initialize the ULPI transciever and check the interface integrity. + * @ulpi_vp - structure containing ULPI viewport data + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_init(struct ulpi_viewport *ulpi_vp); + +/* + * Select transceiver speed. + * @speed - ULPI_FC_HIGH_SPEED, ULPI_FC_FULL_SPEED (default), + * ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed); + +/* + * Enable/disable VBUS. + * @ext_power - external VBUS supply is used (default is false) + * @ext_indicator - external VBUS over-current indicator is used + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power); + +/* + * Configure VBUS indicator + * @external - external VBUS over-current indicator is used + * @passthru - disables ANDing of internal VBUS comparator + * with external VBUS input + * @complement - inverts the external VBUS input + */ +int ulpi_set_vbus_indicator(struct ulpi_viewport *ulpi_vp, int external, + int passthru, int complement); + +/* + * Enable/disable pull-down resistors on D+ and D- USB lines. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_set_pd(struct ulpi_viewport *ulpi_vp, int enable); + +/* + * Select OpMode. + * @opmode - ULPI_FC_OPMODE_NORMAL (default), ULPI_FC_OPMODE_NONDRIVING, + * ULPI_FC_OPMODE_DISABLE_NRZI, ULPI_FC_OPMODE_NOSYNC_NOEOP + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_opmode_sel(struct ulpi_viewport *ulpi_vp, unsigned opmode); + +/* + * Switch to Serial Mode. + * @smode - ULPI_IFACE_6_PIN_SERIAL_MODE or ULPI_IFACE_3_PIN_SERIAL_MODE + * + * returns 0 on success, ULPI_ERROR on failure. + * + * Notes: + * Switches immediately to Serial Mode. + * To return from Serial Mode, STP line needs to be asserted. + */ +int ulpi_serial_mode_enable(struct ulpi_viewport *ulpi_vp, unsigned smode); + +/* + * Put PHY into low power mode. + * + * returns 0 on success, ULPI_ERROR on failure. + * + * Notes: + * STP line must be driven low to keep the PHY in suspend. + * To resume the PHY, STP line needs to be asserted. + */ +int ulpi_suspend(struct ulpi_viewport *ulpi_vp); + +/* + * Reset the transceiver. ULPI interface and registers are not affected. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_reset(struct ulpi_viewport *ulpi_vp); + + +/* ULPI access methods below must be implemented for each ULPI viewport. */ + +/* + * Write to the ULPI PHY register via the viewport. + * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * @value - the value - only 8 lower bits are used, others ignored. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value); + +/* + * Read the ULPI PHY register content via the viewport. + * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * + * returns register content on success, ULPI_ERROR on failure. + */ +u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg); + +/* + * Wait for the reset to complete. + * The Link must not attempt to access the PHY until the reset has + * completed and DIR line is de-asserted. + */ +int ulpi_reset_wait(struct ulpi_viewport *ulpi_vp); + +/* Access Extended Register Set (indicator) */ +#define ACCESS_EXT_REGS_OFFSET 0x2f /* read-write */ +/* Vendor-specific */ +#define VENDOR_SPEC_OFFSET 0x30 + +/* + * Extended Register Set + * + * Addresses 0x00-0x3F map directly to Immediate Register Set. + * Addresses 0x40-0x7F are reserved. + * Addresses 0x80-0xff are vendor-specific. + */ +#define EXT_VENDOR_SPEC_OFFSET 0x80 + +/* ULPI registers, bits and offsets definitions */ +struct ulpi_regs { + /* Vendor ID and Product ID: 0x00 - 0x03 Read-only */ + u8 vendor_id_low; + u8 vendor_id_high; + u8 product_id_low; + u8 product_id_high; + /* Function Control: 0x04 - 0x06 Read */ + u8 function_ctrl; /* 0x04 Write */ + u8 function_ctrl_set; /* 0x05 Set */ + u8 function_ctrl_clear; /* 0x06 Clear */ + /* Interface Control: 0x07 - 0x09 Read */ + u8 iface_ctrl; /* 0x07 Write */ + u8 iface_ctrl_set; /* 0x08 Set */ + u8 iface_ctrl_clear; /* 0x09 Clear */ + /* OTG Control: 0x0A - 0x0C Read */ + u8 otg_ctrl; /* 0x0A Write */ + u8 otg_ctrl_set; /* 0x0B Set */ + u8 otg_ctrl_clear; /* 0x0C Clear */ + /* USB Interrupt Enable Rising: 0x0D - 0x0F Read */ + u8 usb_ie_rising; /* 0x0D Write */ + u8 usb_ie_rising_set; /* 0x0E Set */ + u8 usb_ie_rising_clear; /* 0x0F Clear */ + /* USB Interrupt Enable Falling: 0x10 - 0x12 Read */ + u8 usb_ie_falling; /* 0x10 Write */ + u8 usb_ie_falling_set; /* 0x11 Set */ + u8 usb_ie_falling_clear; /* 0x12 Clear */ + /* USB Interrupt Status: 0x13 Read-only */ + u8 usb_int_status; + /* USB Interrupt Latch: 0x14 Read-only with auto-clear */ + u8 usb_int_latch; + /* Debug: 0x15 Read-only */ + u8 debug; + /* Scratch Register: 0x16 - 0x18 Read */ + u8 scratch; /* 0x16 Write */ + u8 scratch_set; /* 0x17 Set */ + u8 scratch_clear; /* 0x18 Clear */ + /* + * Optional Carkit registers: + * Carkit Control: 0x19 - 0x1B Read + */ + u8 carkit_ctrl; /* 0x19 Write */ + u8 carkit_ctrl_set; /* 0x1A Set */ + u8 carkit_ctrl_clear; /* 0x1B Clear */ + /* Carkit Interrupt Delay: 0x1C Read, Write */ + u8 carkit_int_delay; + /* Carkit Interrupt Enable: 0x1D - 0x1F Read */ + u8 carkit_ie; /* 0x1D Write */ + u8 carkit_ie_set; /* 0x1E Set */ + u8 carkit_ie_clear; /* 0x1F Clear */ + /* Carkit Interrupt Status: 0x20 Read-only */ + u8 carkit_int_status; + /* Carkit Interrupt Latch: 0x21 Read-only with auto-clear */ + u8 carkit_int_latch; + /* Carkit Pulse Control: 0x22 - 0x24 Read */ + u8 carkit_pulse_ctrl; /* 0x22 Write */ + u8 carkit_pulse_ctrl_set; /* 0x23 Set */ + u8 carkit_pulse_ctrl_clear; /* 0x24 Clear */ + /* + * Other optional registers: + * Transmit Positive Width: 0x25 Read, Write + */ + u8 transmit_pos_width; + /* Transmit Negative Width: 0x26 Read, Write */ + u8 transmit_neg_width; + /* Receive Polarity Recovery: 0x27 Read, Write */ + u8 recv_pol_recovery; + /* + * Addresses 0x28 - 0x2E are reserved, so we use offsets + * for immediate registers with higher addresses + */ +}; + +/* + * Register Bits + */ + +/* Function Control */ +#define ULPI_FC_XCVRSEL_MASK (3 << 0) +#define ULPI_FC_HIGH_SPEED (0 << 0) +#define ULPI_FC_FULL_SPEED (1 << 0) +#define ULPI_FC_LOW_SPEED (2 << 0) +#define ULPI_FC_FS4LS (3 << 0) +#define ULPI_FC_TERMSELECT (1 << 2) +#define ULPI_FC_OPMODE_MASK (3 << 3) +#define ULPI_FC_OPMODE_NORMAL (0 << 3) +#define ULPI_FC_OPMODE_NONDRIVING (1 << 3) +#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3) +#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3) +#define ULPI_FC_RESET (1 << 5) +#define ULPI_FC_SUSPENDM (1 << 6) + +/* Interface Control */ +#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0) +#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1) +#define ULPI_IFACE_CARKITMODE (1 << 2) +#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3) +#define ULPI_IFACE_AUTORESUME (1 << 4) +#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5) +#define ULPI_IFACE_PASSTHRU (1 << 6) +#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7) + +/* OTG Control */ +#define ULPI_OTG_ID_PULLUP (1 << 0) +#define ULPI_OTG_DP_PULLDOWN (1 << 1) +#define ULPI_OTG_DM_PULLDOWN (1 << 2) +#define ULPI_OTG_DISCHRGVBUS (1 << 3) +#define ULPI_OTG_CHRGVBUS (1 << 4) +#define ULPI_OTG_DRVVBUS (1 << 5) +#define ULPI_OTG_DRVVBUS_EXT (1 << 6) +#define ULPI_OTG_EXTVBUSIND (1 << 7) + +/* + * USB Interrupt Enable Rising, + * USB Interrupt Enable Falling, + * USB Interrupt Status and + * USB Interrupt Latch + */ +#define ULPI_INT_HOST_DISCONNECT (1 << 0) +#define ULPI_INT_VBUS_VALID (1 << 1) +#define ULPI_INT_SESS_VALID (1 << 2) +#define ULPI_INT_SESS_END (1 << 3) +#define ULPI_INT_IDGRD (1 << 4) + +/* Debug */ +#define ULPI_DEBUG_LINESTATE0 (1 << 0) +#define ULPI_DEBUG_LINESTATE1 (1 << 1) + +/* Carkit Control */ +#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) +#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) +#define ULPI_CARKIT_CTRL_TXDEN (1 << 2) +#define ULPI_CARKIT_CTRL_RXDEN (1 << 3) +#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) +#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) +#define ULPI_CARKIT_CTRL_MICEN (1 << 6) + +/* Carkit Interrupt Enable */ +#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) +#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) +#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) +#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) +#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) + +/* Carkit Interrupt Status and Latch */ +#define ULPI_CARKIT_INT_IDFLOAT (1 << 0) +#define ULPI_CARKIT_INT_CARINTDET (1 << 1) +#define ULPI_CARKIT_INT_DP (1 << 2) + +/* Carkit Pulse Control*/ +#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) +#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) +#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) +#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) + + +#endif /* __USB_ULPI_H__ */ |