diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/x600.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/x600.h | 321 |
1 files changed, 0 insertions, 321 deletions
diff --git a/qemu/roms/u-boot/include/configs/x600.h b/qemu/roms/u-boot/include/configs/x600.h deleted file mode 100644 index 7405419f0..000000000 --- a/qemu/roms/u-boot/include/configs/x600.h +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com> - * - * Copyright (C) 2012 Stefan Roese <sr@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SPEAR600 /* SPEAr600 SoC */ -#define CONFIG_X600 /* on X600 board */ - -#include <asm/arch/hardware.h> - -/* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ_CLOCK 8300000 - -#define CONFIG_SYS_TEXT_BASE 0x00800040 -#define CONFIG_SYS_FLASH_BASE 0xf8000000 -/* Reserve 8KiB for SPL */ -#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */ -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_SPL_LEN) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x60000 - -#define CONFIG_ENV_IS_IN_FLASH - -/* Serial Configuration (PL011) */ -#define CONFIG_SYS_SERIAL0 0xD0000000 -#define CONFIG_SYS_SERIAL1 0xD0080000 -#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1 } -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK (48 * 1000 * 1000) -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ - 57600, 115200 } -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* NOR FLASH config options */ -#define CONFIG_ST_SMI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) - -/* NAND FLASH config options */ -#define CONFIG_NAND_FSMC -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE -#define CONFIG_MTD_ECC_SOFT -#define CONFIG_SYS_FSMC_NAND_8BIT -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* UBI/UBI config options */ -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_RBTREE - -/* Ethernet config options */ -#define CONFIG_MII -#define CONFIG_DESIGNWARE_ETH -#define CONFIG_NET_MULTI -#define CONFIG_PHYLIB -#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - -#define CONFIG_SPEAR_GPIO - -/* I2C config options */ -#define CONFIG_HARD_I2C -#define CONFIG_DW_I2C -#define CONFIG_SYS_I2C_BASE 0xD0200000 -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x02 -#define CONFIG_I2C_CHIPADDRESS 0x50 - -#define CONFIG_RTC_M41T62 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* FPGA config options */ -#define CONFIG_FPGA -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_SPARTAN3 -#define CONFIG_FPGA_COUNT 1 - -/* - * Command support defines - */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MII -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_LZO - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -/* - * U-Boot Environment placing definitions. - */ -#define CONFIG_ENV_SECT_SIZE 0x00010000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x02000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* Miscellaneous configurable options */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_BOOT_PARAMS_ADDR 0x00000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_OF_LIBFDT /* enable passing of devicetree */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_LOOPW /* enable loopw command */ -#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_AUTOBOOT_PROMPT \ - "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay - -#define CONFIG_SYS_MEMTEST_START 0x00800000 -#define CONFIG_SYS_MEMTEST_END 0x04000000 -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) -#define CONFIG_IDENT_STRING "-SPEAr" -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "X600> " -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x00800000 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* Use last 2 lwords in internal SRAM for bootcounter */ -#define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8 - -#define CONFIG_HOSTNAME x600 -#define CONFIG_UBI_PART ubi0 -#define CONFIG_UBIFS_VOLUME rootfs - -#define xstr(s) str(s) -#define str(s) #s - -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr=1000000\0" \ - "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\ - "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \ - "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \ - " ${filesize};" \ - "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize}\0" \ - "upd=run load update\0" \ - "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \ - "part=" xstr(CONFIG_UBI_PART) "\0" \ - "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \ - "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ - "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ - " ${filesize}\0" \ - "upd_ubifs=run load_ubifs update_ubifs\0" \ - "init_ubifs=nand erase.part ubi0;ubi part ${part};" \ - "ubi create ${vol} 4000000\0" \ - "netdev=eth0\0" \ - "rootpath=/opt/eldk-4.2/arm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "boot_part=0\0" \ - "altbootcmd=if test $boot_part -eq 0;then " \ - "echo Switching to partition 1!;" \ - "setenv boot_part 1;" \ - "else; " \ - "echo Switching to partition 0!;" \ - "setenv boot_part 0;" \ - "fi;" \ - "saveenv;boot\0" \ - "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \ - "root=ubi0:rootfs rootfstype=ubifs\0" \ - "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ - "kernel_fs=/boot/uImage \0" \ - "kernel_addr=1000000\0" \ - "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \ - "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \ - "dtb_addr=1800000\0" \ - "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ - "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \ - "${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "net_nfs=run load_dtb load_kernel; " \ - "run nfsargs addip addcon addmtd addmisc;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ - " addcon addmisc addmtd;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \ - "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ - "ubifsload ${dtb_addr} ${dtb_fs};\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ - "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \ - "bootcmd=run nand_ubifs\0" \ - "\0" - -/* Stack sizes */ -#define CONFIG_STACKSIZE (512 * 1024) - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_1_MAXSIZE 0x40000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* - * SPL related defines - */ -#define CONFIG_SPL -#define CONFIG_SPL_TEXT_BASE 0xd2800b00 -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" - -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ -#define CONFIG_SPL_NO_PRINTF - -/* - * Please select/define only one of the following - * Each definition corresponds to a supported DDR chip. - * DDR configuration is based on the following selection - */ -#define CONFIG_DDR_MT47H64M16 1 -#define CONFIG_DDR_MT47H32M16 0 -#define CONFIG_DDR_MT47H128M8 0 - -/* - * Synchronous/Asynchronous operation of DDR - * - * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation - * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation - * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation - */ -#define CONFIG_DDR_2HCLK 1 -#define CONFIG_DDR_HCLK 0 -#define CONFIG_DDR_PLL2 0 - -/* - * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported - * or not. Modify/Add to only these macros to define new boot types - */ -#define USB_BOOT_SUPPORTED 0 -#define PCIE_BOOT_SUPPORTED 0 -#define SNOR_BOOT_SUPPORTED 1 -#define NAND_BOOT_SUPPORTED 1 -#define PNOR_BOOT_SUPPORTED 0 -#define TFTP_BOOT_SUPPORTED 0 -#define UART_BOOT_SUPPORTED 0 -#define SPI_BOOT_SUPPORTED 0 -#define I2C_BOOT_SUPPORTED 0 -#define MMC_BOOT_SUPPORTED 0 - -#endif /* __CONFIG_H */ |