diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/vexpress_aemv8a.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/vexpress_aemv8a.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/qemu/roms/u-boot/include/configs/vexpress_aemv8a.h b/qemu/roms/u-boot/include/configs/vexpress_aemv8a.h deleted file mode 100644 index dff6adcc7..000000000 --- a/qemu/roms/u-boot/include/configs/vexpress_aemv8a.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Configuration for Versatile Express. Parts were derived from other ARM - * configurations. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __VEXPRESS_AEMV8A_H -#define __VEXPRESS_AEMV8A_H - -#define DEBUG - -#define CONFIG_REMAKE_ELF - -#define CONFIG_GICV3 - -/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ - -/*#define CONFIG_SYS_GENERIC_BOARD*/ - -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_SUPPORT_RAW_INITRD - -/* Cache Definitions */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_ICACHE_OFF - -#define CONFIG_IDENT_STRING " vexpress_aemv8a" -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" - -/* Link Definitions */ -#define CONFIG_SYS_TEXT_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - -/* Flat Device Tree Definitions */ -#define CONFIG_OF_LIBFDT - -#define CONFIG_DEFAULT_DEVICE_TREE vexpress64 - -/* SMP Spin Table Definitions */ -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - -/* CS register bases for the original memory map. */ -#define V2M_PA_CS0 0x00000000 -#define V2M_PA_CS1 0x14000000 -#define V2M_PA_CS2 0x18000000 -#define V2M_PA_CS3 0x1c000000 -#define V2M_PA_CS4 0x0c000000 -#define V2M_PA_CS5 0x10000000 - -#define V2M_PERIPH_OFFSET(x) (x << 16) -#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) -#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) -#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) - -#define V2M_BASE 0x80000000 - -/* - * Physical addresses, offset from V2M_PA_CS0-3 - */ -#define V2M_NOR0 (V2M_PA_CS0) -#define V2M_NOR1 (V2M_PA_CS4) -#define V2M_SRAM (V2M_PA_CS1) - -/* Common peripherals relative to CS7. */ -#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) -#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) -#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) -#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) - -#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) -#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) -#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) -#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) - -#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) - -#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17)) -#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18)) - -#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22)) -#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23)) - -#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26)) - -#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31)) - -/* System register offsets. */ -#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) -#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) -#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ - -/* Generic Interrupt Controller Definitions */ -#ifdef CONFIG_GICV3 -#define GICD_BASE (0x2f000000) -#define GICR_BASE (0x2f100000) -#else -#define GICD_BASE (0x2C001000) -#define GICC_BASE (0x2C002000) -#endif - -#define CONFIG_SYS_MEMTEST_START V2M_BASE -#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* SMSC91C111 Ethernet Configuration */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE (0x01A000000) - -/* PL011 Serial Configuration */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1} -#define CONFIG_CONS_INDEX 0 - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_SYS_SERIAL0 V2M_UART0 -#define CONFIG_SYS_SERIAL1 V2M_UART1 - -/* Command line configuration */ -#define CONFIG_MENU -/*#define CONFIG_MENU_SHOW*/ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PXE -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_PXE -#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=0x200000\0" \ - "initrd_addr=0xa00000\0" \ - "initrd_size=0x2000000\0" \ - "fdt_addr=0x100000\0" \ - "fdt_high=0xa0000000\0" - -#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" -#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \ - "$initrd_addr:$initrd_size $fdt_addr" -#define CONFIG_BOOTDELAY -1 - -/* Do not preserve environment */ -#define CONFIG_ENV_IS_NOWHERE 1 -#define CONFIG_ENV_SIZE 0x1000 - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PROMPT "VExpress64# " -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - -#endif /* __VEXPRESS_AEMV8A_H */ |