diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/usb_a9263.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/usb_a9263.h | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/qemu/roms/u-boot/include/configs/usb_a9263.h b/qemu/roms/u-boot/include/configs/usb_a9263.h deleted file mode 100644 index 3c5487078..000000000 --- a/qemu/roms/u-boot/include/configs/usb_a9263.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * (C) Copyright 2007-2013 - * Stelian Pop <stelian.pop@leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com> - * Mateusz Kulikowski <mateusz.kulikowski@gmail.com> - * - * Settings for Calao USB-A9263 board - * - * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap - * installed on board will not be able to load it properly. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#include <asm/hardware.h> - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263 - -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_OF_LIBFDT -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_TEXT_BASE 0x23f00000 - -/* - * Hardware drivers - */ -#define CONFIG_AT91_GPIO - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 -#define AT91_SPI_CLK 8000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* no NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) -#endif - -#define MTDPARTS_DEFAULT \ - "mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)" - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -/* bootstrap + u-boot + env in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000) -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_BOOTCOMMAND "nboot 21000000 0" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 " \ - "mtdparts=" MTDPARTS_DEFAULT " " \ - "rw rootfstype=jffs2" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif |