diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/nokia_rx51.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/nokia_rx51.h | 470 |
1 files changed, 0 insertions, 470 deletions
diff --git a/qemu/roms/u-boot/include/configs/nokia_rx51.h b/qemu/roms/u-boot/include/configs/nokia_rx51.h deleted file mode 100644 index e0c0fac8e..000000000 --- a/qemu/roms/u-boot/include/configs/nokia_rx51.h +++ /dev/null @@ -1,470 +0,0 @@ -/* - * (C) Copyright 2011-2012 - * Pali Rohár <pali.rohar@gmail.com> - * - * (C) Copyright 2010 - * Alistair Buxton <a.j.buxton@gmail.com> - * - * Derived from Beagle Board code: - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the Nokia RX-51 aka N900. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ -#define CONFIG_OMAP3_RX51 /* working with RX51 */ -#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ -#define CONFIG_OMAP_COMMON - -#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 - -/* - * Nokia X-Loader loading secondary image to address 0x80400000 - * NOLO loading boot image to random place, so it doesn't really - * matter what we set this to. We have to copy u-boot to this address - */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap3.h> -#include <asm/arch/mem.h> -#include <linux/stringify.h> - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R -#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ - -#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ -#define CONFIG_INITRD_TAG /* enable passing initrd */ -#define CONFIG_REVISION_TAG /* enable passing revision tag*/ -#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_UBI_SIZE (512 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ - (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* USB */ -#define CONFIG_MUSB_UDC -#define CONFIG_MUSB_HDC -#define CONFIG_USB_OMAP3 -#define CONFIG_TWL4030_USB - -/* USB device configuration */ -#define CONFIG_USB_DEVICE -#define CONFIG_USBD_VENDORID 0x0421 -#define CONFIG_USBD_PRODUCTID 0x01c8 -#define CONFIG_USBD_MANUFACTURER "Nokia" -#define CONFIG_USBD_PRODUCT_NAME "N900" - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_NO_FLASH - -/* commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_EXT4 /* EXT4 Support */ -#define CONFIG_CMD_FAT /* FAT support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_GPIO /* Enable gpio command */ - -#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ -#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ - -#ifdef ONENAND_SUPPORT - -#define CONFIG_CMD_ONENAND /* ONENAND support */ -#define CONFIG_CMD_MTDPARTS /* mtd parts support */ - -#ifdef UBIFS_SUPPORT -#define CONFIG_CMD_UBI /* UBI Support */ -#define CONFIG_CMD_UBIFS /* UBIFS Support */ -#endif - -#endif - -/* commands not needed from config_cmd_default.h */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ -#undef CONFIG_CMD_NFS /* NFS support */ -#undef CONFIG_CMD_SAVEENV /* saveenv */ -#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ - -#define CONFIG_OMAP3_SPI -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER -#define CONFIG_TWL4030_LED -#define CONFIG_TWL4030_KEYPAD - -#define CONFIG_OMAP_GPIO -#define GPIO_SLIDE 71 - -/* - * Board ONENAND Info. - */ - -#define PART1_NAME "bootloader" -#define PART1_SIZE 128 -#define PART1_MULL 1024 -#define PART1_SUFF "k" -#define PART1_OFFS 0x00000000 -#define PART1_MASK 0x00000003 - -#define PART2_NAME "config" -#define PART2_SIZE 384 -#define PART2_MULL 1024 -#define PART2_SUFF "k" -#define PART2_OFFS 0x00020000 -#define PART2_MASK 0x00000000 - -#define PART3_NAME "log" -#define PART3_SIZE 256 -#define PART3_MULL 1024 -#define PART3_SUFF "k" -#define PART3_OFFS 0x00080000 -#define PART3_MASK 0x00000000 - -#define PART4_NAME "kernel" -#define PART4_SIZE 2 -#define PART4_MULL 1024*1024 -#define PART4_SUFF "m" -#define PART4_OFFS 0x000c0000 -#define PART4_MASK 0x00000000 - -#define PART5_NAME "initfs" -#define PART5_SIZE 2 -#define PART5_MULL 1024*1024 -#define PART5_SUFF "m" -#define PART5_OFFS 0x002c0000 -#define PART5_MASK 0x00000000 - -#define PART6_NAME "rootfs" -#define PART6_SIZE 257280 -#define PART6_MULL 1024 -#define PART6_SUFF "k" -#define PART6_OFFS 0x004c0000 -#define PART6_MASK 0x00000000 - -#ifdef ONENAND_SUPPORT - -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS - -#ifdef UBIFS_SUPPORT -#define CONFIG_RBTREE -#define CONFIG_LZO -#endif - -#define MTDIDS_DEFAULT "onenand0=onenand" -#define MTDPARTS_DEFAULT "mtdparts=onenand:" \ - __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ - __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ - __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ - __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ - __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ - "-(" PART6_NAME ")" - -#endif - -/* Watchdog support */ -#define CONFIG_HW_WATCHDOG - -/* - * Framebuffer - */ -/* Video console */ -#define CONFIG_VIDEO -#define CONFIG_CFB_CONSOLE -#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ -#define CONFIG_VIDEO_LOGO -#define VIDEO_FB_16BPP_PIXEL_SWAP -#define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_SPLASH_SCREEN - -/* functions for cfb_console */ -#define VIDEO_KBD_INIT_FCT rx51_kp_init() -#define VIDEO_TSTC_FCT rx51_kp_tstc -#define VIDEO_GETC_FCT rx51_kp_getc -#ifndef __ASSEMBLY__ -int rx51_kp_init(void); -int rx51_kp_tstc(void); -int rx51_kp_getc(void); -#endif - -#ifndef MTDPARTS_DEFAULT -#define MTDPARTS_DEFAULT -#endif - -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "usbtty=cdc_acm\0" \ - "stdin=vga\0" \ - "stdout=vga\0" \ - "stderr=vga\0" \ - "setcon=setenv stdin ${con};" \ - "setenv stdout ${con};" \ - "setenv stderr ${con}\0" \ - "sercon=setenv con serial; run setcon\0" \ - "usbcon=setenv con usbtty; run setcon\0" \ - "vgacon=setenv con vga; run setcon\0" \ - "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ - "switchmmc=mmc dev ${mmcnum}\0" \ - "kernaddr=0x82008000\0" \ - "initrdaddr=0x84008000\0" \ - "scriptaddr=0x86008000\0" \ - "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ - "${loadaddr} ${mmcfile}\0" \ - "kernload=setenv loadaddr ${kernaddr};" \ - "setenv mmcfile ${mmckernfile};" \ - "run fileload\0" \ - "initrdload=setenv loadaddr ${initrdaddr};" \ - "setenv mmcfile ${mmcinitrdfile};" \ - "run fileload\0" \ - "scriptload=setenv loadaddr ${scriptaddr};" \ - "setenv mmcfile ${mmcscriptfile};" \ - "run fileload\0" \ - "scriptboot=echo Running ${mmcscriptfile} from mmc " \ - "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ - "kernboot=echo Booting ${mmckernfile} from mmc " \ - "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ - "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ - "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ - "attachboot=echo Booting attached kernel image ...;" \ - "setenv setup_omap_atag 1;" \ - "bootm ${attkernaddr};" \ - "setenv setup_omap_atag\0" \ - "trymmcscriptboot=if run switchmmc; then " \ - "if run scriptload; then " \ - "run scriptboot;" \ - "fi;" \ - "fi\0" \ - "trymmckernboot=if run switchmmc; then " \ - "if run kernload; then " \ - "run kernboot;" \ - "fi;" \ - "fi\0" \ - "trymmckerninitrdboot=if run switchmmc; then " \ - "if run initrdload; then " \ - "if run kernload; then " \ - "run kerninitrdboot;" \ - "fi;" \ - "fi; " \ - "fi\0" \ - "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ - "setenv mmckernfile uImage; run trymmckernboot\0" \ - "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ - "setenv mmcpart 2; run trymmcpartboot;" \ - "setenv mmcpart 3; run trymmcpartboot;" \ - "setenv mmcpart 4; run trymmcpartboot\0" \ - "trymmcboot=if run switchmmc; then " \ - "setenv mmctype fat;" \ - "run trymmcallpartboot;" \ - "setenv mmctype ext2;" \ - "run trymmcallpartboot;" \ - "setenv mmctype ext4;" \ - "run trymmcallpartboot;" \ - "fi\0" \ - "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ - "sdboot=setenv mmcnum 0; run trymmcboot\0" \ - "menucmd=bootmenu\0" \ - "bootmenu_0=Attached kernel=run attachboot\0" \ - "bootmenu_1=Internal eMMC=run emmcboot\0" \ - "bootmenu_2=External SD card=run sdboot\0" \ - "bootmenu_3=U-Boot boot order=boot\0" \ - "bootmenu_delay=30\0" \ - "" - -#define CONFIG_PREBOOT \ - "setenv mmcnum 1; setenv mmcpart 1;" \ - "setenv mmcscriptfile bootmenu.scr;" \ - "if run switchmmc; then " \ - "setenv mmcdone true;" \ - "setenv mmctype fat;" \ - "if run scriptload; then true; else " \ - "setenv mmctype ext2;" \ - "if run scriptload; then true; else " \ - "setenv mmctype ext4;" \ - "if run scriptload; then true; else " \ - "setenv mmcdone false;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "if ${mmcdone}; then " \ - "run scriptboot;" \ - "fi;" \ - "fi;" \ - "if run slide; then true; else " \ - "setenv bootmenu_delay 0;" \ - "setenv bootdelay 0;" \ - "fi" - -#define CONFIG_POSTBOOTMENU \ - "echo;" \ - "echo Extra commands:;" \ - "echo run sercon - Use serial port for control.;" \ - "echo run usbcon - Use usbtty for control.;" \ - "echo run vgacon - Use framebuffer/keyboard.;" \ - "echo run sdboot - Boot from SD card slot.;" \ - "echo run emmcboot - Boot internal eMMC memory.;" \ - "echo run attachboot - Boot attached kernel image.;" \ - "echo" - -#define CONFIG_BOOTCOMMAND \ - "run sdboot;" \ - "run emmcboot;" \ - "run attachboot;" \ - "echo" - -#define CONFIG_BOOTDELAY 30 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_MENU -#define CONFIG_MENU_SHOW - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "Nokia RX-51 # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 - -/* - * FLASH and environment organization - */ - -#define CONFIG_ENV_IS_NOWHERE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * Attached kernel image - */ - -#define SDRAM_SIZE 0x10000000 /* 256 MB */ -#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) - -#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ -#define KERNEL_OFFSET 0x40000 /* 256 kB */ -#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) -#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) - -/* Reserve protected RAM for attached kernel */ -#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) - -#endif /* __CONFIG_H */ |