diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/mx31pdk.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/mx31pdk.h | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/qemu/roms/u-boot/include/configs/mx31pdk.h b/qemu/roms/u-boot/include/configs/mx31pdk.h deleted file mode 100644 index f223788e5..000000000 --- a/qemu/roms/u-boot/include/configs/mx31pdk.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> - * - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Kshitij Gupta <kshitij@ti.com> - * - * Configuration settings for the Freescale i.MX31 PDK board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS - -#define CONFIG_SPL -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT - -#define CONFIG_SPL_TEXT_BASE 0x87dc0000 -#define CONFIG_SYS_TEXT_BASE 0x87e00000 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_MXC_GPIO - -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 2 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ - -#include <config_cmd_default.h> - -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SPI -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_BOOTZ - -/* - * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require - * that CFG_NO_FLASH is undefined). - */ -#undef CONFIG_CMD_IMLS - -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ - "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ - "tftpboot 0x81000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \ - "nand erase 0x0 0x40000; " \ - "nand write 0x81000000 0x0 0x40000\0" - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE 0xB6000000 -#define CONFIG_SMC911X_32_BIT - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x80010000 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 - -#define CONFIG_CMDLINE_EDITING - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/* No NOR flash present */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_OFFSET_REDUND 0x60000 -#define CONFIG_ENV_SIZE (128 * 1024) - -/* - * NAND driver - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE - -/* NAND configuration for the NAND_SPL */ - -/* Start copying real U-boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 -/* Load U-Boot to this address */ -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST - -#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 - - -/* Configuration of lowlevel_init.S (clocks and SDRAM) */ -#define CCM_CCMR_SETUP 0x074B0BF5 -#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \ - PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \ - PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \ - PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0)) -#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \ - PLL_MFN(12)) - -#define ESDMISC_MDDR_SETUP 0x00000004 -#define ESDMISC_MDDR_RESET_DL 0x0000000c -#define ESDCFG0_MDDR_SETUP 0x006ac73a - -#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) -#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ(2) | ESDCTL_BL(1)) -#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) -#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) -#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) -#define ESDCTL_RW ESDCTL_SETTINGS - -#endif /* __CONFIG_H */ |