diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/km/kmp204x-common.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/km/kmp204x-common.h | 465 |
1 files changed, 0 insertions, 465 deletions
diff --git a/qemu/roms/u-boot/include/configs/km/kmp204x-common.h b/qemu/roms/u-boot/include/configs/km/kmp204x-common.h deleted file mode 100644 index efd96352e..000000000 --- a/qemu/roms/u-boot/include/configs/km/kmp204x-common.h +++ /dev/null @@ -1,465 +0,0 @@ -/* - * (C) Copyright 2013 Keymile AG - * Valentin Longchamp <valentin.longchamp@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_KMP204X_H -#define _CONFIG_KMP204X_H - -#define CONFIG_PHYS_64BIT -#define CONFIG_PPC_P2041 - -#define CONFIG_SYS_TEXT_BASE 0xfff80000 - -#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" - -/* an additionnal option is required for UBI as subpage access is - * supported in u-boot */ -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" - -#define CONFIG_NAND_ECC_BCH - -/* common KM defines */ -#include "keymile-common.h" - -#define CONFIG_SYS_RAMBOOT -#define CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI board/keymile/kmp204x/pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg - -/* High Level Configuration Options */ -#define CONFIG_BOOKE -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_E500MC /* BOOKE e500mc family */ -#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ -#define CONFIG_MP /* support multiple processors */ - -#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ -#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS -#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 /* PCIE controler 1 */ -#define CONFIG_PCIE3 /* PCIE controler 3 */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_SYS_DPAA_RMAN /* RMan */ - -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -/* Environment in SPI Flash */ -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 20000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB for u-boot */ -#define CONFIG_ENV_SIZE 0x004000 /* 16K env */ -#define CONFIG_ENV_SECT_SIZE 0x010000 -#define CONFIG_ENV_OFFSET_REDUND 0x110000 -#define CONFIG_ENV_TOTAL_SIZE 0x020000 - -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_ADDR_MAP -#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ - -#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */ - -/* - * Config the L3 Cache as L3 SRAM - */ -#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ - CONFIG_RAMBOOT_TEXT_BASE) -#define CONFIG_SYS_L3_SIZE (1024 << 10) -#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) - -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull - -/* - * DDR Setup - */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#define CONFIG_DDR_SPD -#define CONFIG_SYS_FSL_DDR3 -#define CONFIG_FSL_DDR_INTERACTIVE - -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x54 -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/****************************************************************************** - * (PRAM usage) - * ... ------------------------------------------------------- - * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM - * ... |<------------------- pram -------------------------->| - * ... ------------------------------------------------------- - * @END_OF_RAM: - * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose - * @CONFIG_KM_PHRAM: address for /var - * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) - * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM - */ - -/* size of rootfs in RAM */ -#define CONFIG_KM_ROOTFSSIZE 0x0 -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x100000 -/* reserved pram area at the end of memory [hex] - * u-boot reserves some memory for the MP boot page */ -#define CONFIG_KM_RESERVED_PRAM 0x1000 -/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable - * is not valid yet, which is the case for when u-boot copies itself to RAM */ -#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) - -#define CONFIG_KM_CRAMFS_ADDR 0x2000000 -#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ -#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ - -/* - * Local Bus Definitions - */ - -/* Set the local bus clock 1/8 of plat clk, 2 clk delay LALE */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_2) - -/* Nand Flash */ -#define CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull - -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -#define CONFIG_BCH - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \ - | OR_FCM_BCTLD /* LBCTL not ass */ \ - | OR_FCM_SCY_1 /* 1 clk wait cycle */ \ - | OR_FCM_RST /* 1 clk read setup */ \ - | OR_FCM_PGS /* Large page size */ \ - | OR_FCM_CST) /* 0.25 command setup */ - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -/* QRIO FPGA */ -#define CONFIG_SYS_QRIO_BASE 0xfb000000 -#define CONFIG_SYS_QRIO_BASE_PHYS 0xffb000000ull - -#define CONFIG_SYS_QRIO_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE_PHYS) \ - | BR_PS_8 /* Port Size 8 bits */ \ - | BR_DECC_OFF /* no error corr */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_QRIO_OR_PRELIM (OR_AM_64KB /* length 64K */ \ - | OR_GPCM_BCTLD /* no LCTL assert */ \ - | OR_GPCM_ACS_DIV4 /* LCS 1/4 clk after */ \ - | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ - | OR_GPCM_TRLX /* relaxed tmgs */ \ - | OR_GPCM_EAD) /* extra bus clk cycles */ - -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ - -/* bootcounter in QRIO */ -#define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R -#define CONFIG_LAST_STAGE_INIT - -#define CONFIG_HWCONFIG - -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) - -#define CONFIG_KM_CONSOLE_TTY "ttyS0" - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* new uImage format support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* I2C */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ -#define CONFIG_SYS_NUM_I2C_BUSES 3 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ - } -#ifndef __ASSEMBLY__ -void set_sda(int state); -void set_scl(int state); -int get_sda(void); -int get_scl(void); -#endif - -#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 20000000 -#define CONFIG_SF_DEFAULT_MODE 0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 1, direct to uli, tgtid 3, Base address 20000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -/* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8010000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8010000ull -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* Qman/Bman */ -#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -/* Default address of microcode for the Linux Fman driver - * env is stored at 0x100000, sector size is 0x10000, x2 (redundant) - * ucode is stored after env, so we got 0x120000. - */ -#define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x120000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#define CONFIG_FMAN_ENET -#define CONFIG_PHYLIB_10G -#define CONFIG_PHY_MARVELL /* there is a marvell phy */ - -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_E1000 - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION - -/* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */ -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11 -#define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_PHYLIB /* recommended PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC5" -#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - -/* - * Environment - */ -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * additionnal command line configuration. - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#define CONFIG_CMD_ERRATA - -/* we don't need flash support */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH -#undef CONFIG_FLASH_CFI_MTD -#undef CONFIG_JFFS2_CMDLINE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -#define __USB_PHY_TYPE utmi - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -#ifndef MTDIDS_DEFAULT -# define MTDIDS_DEFAULT "nand0=fsl_elbc_nand" -#endif /* MTDIDS_DEFAULT */ - -#ifndef MTDPARTS_DEFAULT -# define MTDPARTS_DEFAULT "mtdparts=" \ - "fsl_elbc_nand:" \ - "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" -#endif /* MTDPARTS_DEFAULT */ - -/* architecture specific default bootargs */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" - -/* FIXME: FDT_ADDR is unspecified */ -#define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ - "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.pbl\0" \ - "update=" \ - "sf probe 0;sf erase 0 +${filesize};" \ - "sf write ${load_addr_r} 0 ${filesize};\0" \ - "set_fdthigh=true\0" \ - "" - -#define CONFIG_HW_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ - "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "usb_dr_mode=host\0" - -#define CONFIG_KM_NEW_ENV \ - "newenv=sf probe 0;" \ - "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ - __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" - -/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ -#ifndef CONFIG_KM_DEF_ARCH -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ARCH \ - CONFIG_KM_NEW_ENV \ - CONFIG_HW_ENV_SETTINGS \ - "EEprom_ivm=pca9547:70:9\0" \ - "" - -#endif /* _CONFIG_KMP204X_H */ |