diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/dreamplug.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/dreamplug.h | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/qemu/roms/u-boot/include/configs/dreamplug.h b/qemu/roms/u-boot/include/configs/dreamplug.h deleted file mode 100644 index b1ca85925..000000000 --- a/qemu/roms/u-boot/include/configs/dreamplug.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2011 - * Jason Cooper <u-boot@lakedaemon.net> - * - * Based on work by: - * Marvell Semiconductor <www.marvell.com> - * Written-by: Siddarth Gore <gores@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_DREAMPLUG_H -#define _CONFIG_DREAMPLUG_H - -/* - * FIXME: This belongs in mach-types.h. However, we only pull mach-types - * from Linus' kernel.org tree. This hasn't been updated primarily due to - * the recent arch/arm reshuffling. So, in the meantime, we'll place it - * here. - */ -#include <asm/mach-types.h> -#ifdef MACH_TYPE_DREAMPLUG -#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this." -#else -#define MACH_TYPE_DREAMPLUG 3550 -#endif - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include <config_cmd_default.h> -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_SF -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE -#define CONFIG_CMD_DATE - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * Environment variables configurations - */ -#ifdef CONFIG_SPI_FLASH -#define CONFIG_ENV_IS_IN_SPI_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif - -#ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH 1 -#define CONFIG_HARD_SPI 1 -#define CONFIG_KIRKWOOD_SPI 1 -#define CONFIG_SPI_FLASH_MACRONIX 1 -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ -#endif - -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x1000 /* 4k */ -#define CONFIG_ENV_ADDR 0x100000 -#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ - "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "x_bootcmd_ethernet=ping 192.168.2.1\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ - "x_bootargs=console=ttyS0,115200\0" \ - "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - -#define CONFIG_SYS_ALT_MEMTEST - -/* - * display enhanced info about the cpu at boot. - */ -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_OF_LIBFDT - -#endif /* _CONFIG_DREAMPLUG_H */ |