diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/cpuat91.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/cpuat91.h | 236 |
1 files changed, 0 insertions, 236 deletions
diff --git a/qemu/roms/u-boot/include/configs/cpuat91.h b/qemu/roms/u-boot/include/configs/cpuat91.h deleted file mode 100644 index ce521012f..000000000 --- a/qemu/roms/u-boot/include/configs/cpuat91.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * CPUAT91 by (C) Copyright 2006-2010 Eric Benard - * eric@eukrea.com - * - * Configuration settings for the CPUAT91 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_CPUAT91_H -#define _CONFIG_CPUAT91_H - -#include <linux/sizes.h> - -#ifdef CONFIG_RAMBOOT -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21F00000 -#else -#define CONFIG_BOOTDELAY 1 -#define CONFIG_SYS_TEXT_BASE 0 -#endif - -#define AT91C_XTAL_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -#define CONFIG_ARM920T -#define CONFIG_AT91RM9200 -#define CONFIG_CPUAT91 -#define USE_920T_MMU - -#include <asm/hardware.h> /* needed for port definitions */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_BOARD_EARLY_INIT_F - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR -/* flash */ -#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 -#define CONFIG_SYS_MC_PUP_VAL 0x00000000 -#define CONFIG_SYS_MC_PUER_VAL 0x00000000 -#define CONFIG_SYS_MC_ASR_VAL 0x00000000 -#define CONFIG_SYS_MC_AASR_VAL 0x00000000 -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -#undef CONFIG_HARD_I2C -#define AT91_PIN_SDA (1<<25) -#define AT91_PIN_SCL (1<<26) - -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(AT91_PMX_AA_TWD, &pio->pioa.mddr); -#define I2C_TRISTATE writel(AT91_PMX_AA_TWD, &pio->pioa.mder); -#define I2C_READ ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0) -#define I2C_SDA(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWD, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWD, &pio->pioa.codr); -#define I2C_SCL(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.codr); - -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CACHE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_DHCP - -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#endif - -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) - -#define CONFIG_DRIVER_AT91EMAC -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RMII -#define CONFIG_MII -#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_KS8721_PHY - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_PROTECTION -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define PHYS_FLASH_SIZE (16 * 1024 * 1024) -#define CONFIG_SYS_FLASH_BANKS_LIST \ - { PHYS_FLASH_1 } - -#if defined(CONFIG_CMD_USB) -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_AT91C_PQFP_UHPBU -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#endif - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) -#define CONFIG_ENV_SECT_SIZE (128 * 1024) - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "CPUAT91=> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_DEVICE_NULLDEV -#define CONFIG_SILENT_CONSOLE - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot\n" -#define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_AUTOBOOT_DELAY_STR "d" - -#define CONFIG_VERSION_VARIABLE - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "128k(u-boot)ro," \ - "128k(u-boot-env)," \ - "1792k(kernel)," \ - "-(rootfs)" - -#define CONFIG_BOOTARGS \ - "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdid=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \ - "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ - "10000000 ${filesize}\0" \ - "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ - "1019ffff; erase 10040000 101fffff; cp.b 21000000 " \ - "10040000 ${filesize}\0" \ - "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ - "10200000 10ffffff; erase 10200000 10ffffff; cp.b " \ - "21000000 10200000 ${filesize}\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "flashboot=run ramargs;bootm 10040000\0" \ - "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ - "bootm 21000000\0" -#endif /* _CONFIG_CPUAT91_H */ |