diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/cm-bf533.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/cm-bf533.h | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/qemu/roms/u-boot/include/configs/cm-bf533.h b/qemu/roms/u-boot/include/configs/cm-bf533.h deleted file mode 100644 index 8bd499a7d..000000000 --- a/qemu/roms/u-boot/include/configs/cm-bf533.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * U-boot - Configuration file for CM-BF533 board - */ - -#ifndef __CONFIG_CM_BF533_H__ -#define __CONFIG_CM_BF533_H__ - -#include <asm/config-pre.h> - - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf533-0.3 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 22 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -/* Decrease core voltage */ -#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000) - - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 9 -#define CONFIG_MEM_SIZE 32 - -#define CONFIG_EBIU_SDRRC_VAL ((((CONFIG_SCLK_HZ / 1000) * 64) / 8192) - (7 + 2)) -#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | PSS | TWR_2 | TRCD_2 | TRP_2 | TRAS_7 | PASR_ALL | CL_3) - -#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) -#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) -#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) - - -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20200300 -#define CONFIG_HOSTNAME cm-bf533 -/* Uncomment next line to use fixed MAC address */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 16 - - -/* - * Env Storage Settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x10000 - - -/* - * Misc Settings - */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_UART_CONSOLE 0 -#define CONFIG_BOOTCOMMAND "run flashboot" -#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |