diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/bf527-ad7160-eval.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/bf527-ad7160-eval.h | 146 |
1 files changed, 0 insertions, 146 deletions
diff --git a/qemu/roms/u-boot/include/configs/bf527-ad7160-eval.h b/qemu/roms/u-boot/include/configs/bf527-ad7160-eval.h deleted file mode 100644 index c0dfe2685..000000000 --- a/qemu/roms/u-boot/include/configs/bf527-ad7160-eval.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * U-boot - Configuration file for BF527 AD7160-EVAL board - */ - -#ifndef __CONFIG_BF527_AD7160_EVAL_H__ -#define __CONFIG_BF527_AD7160_EVAL_H__ - -#include <asm/config-pre.h> - - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf527-0.2 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 24000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 25 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 10 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_SDRRC_VAL 0x03F6 -#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS) - -#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) -#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) -#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (640 * 1024) - - -/* - * NAND Settings - * (can't be used same time as ethernet) - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif -#ifdef CONFIG_BFIN_NFC -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 -#define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif - - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 259 - - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO - - -/* - * Env Storage Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#endif - - -/* - * I2C Settings - */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 - - -/* - * SPI_MMC Settings - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC_SPI - - -/* - * Misc Settings - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |