diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/bcm28155_ap.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/bcm28155_ap.h | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/qemu/roms/u-boot/include/configs/bcm28155_ap.h b/qemu/roms/u-boot/include/configs/bcm28155_ap.h deleted file mode 100644 index e93b855f8..000000000 --- a/qemu/roms/u-boot/include/configs/bcm28155_ap.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright 2013 Broadcom Corporation. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __BCM28155_AP_H -#define __BCM28155_AP_H - -#include <linux/sizes.h> -#include <asm/arch/sysmap.h> - -/* Architecture, CPU, chip, mach, etc */ -#define CONFIG_ARMV7 -#define CONFIG_KONA -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Memory configuration - */ -#define CONFIG_SYS_TEXT_BASE 0xae000000 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_SIZE 0x80000000 -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ -#define CONFIG_STACKSIZE SZ_256K - -/* GPIO Driver */ -#define CONFIG_KONA_GPIO - -/* MMC/SD Driver */ -#define CONFIG_SDHCI -#define CONFIG_MMC_SDMA -#define CONFIG_KONA_SDHCI -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR -#define CONFIG_SYS_SDIO0_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO1_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO2_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO3_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO0 "sdio1" -#define CONFIG_SYS_SDIO1 "sdio2" -#define CONFIG_SYS_SDIO2 "sdio3" -#define CONFIG_SYS_SDIO3 "sdio4" - -/* I2C Driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_KONA -#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */ -#define CONFIG_SYS_MAX_I2C_BUS 4 -#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR -#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR -#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR -#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR - -/* Timer Driver */ -#define CONFIG_SYS_TIMER_RATE 32000 -#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */ - -/* Init functions */ -#define CONFIG_MISC_INIT_R /* board's misc_init_r function */ - -/* Some commands use this as the default load address */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - -/* No mtest functions as recommended */ -#undef CONFIG_CMD_MEMORY - -/* - * This is the initial SP which is used only briefly for relocating the u-boot - * image to the top of SDRAM. After relocation u-boot moves the stack to the - * proper place. - */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - -/* Serial Info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -/* Post pad 3 bytes after each reg addr */ -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 13000000 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 0x3e000000 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_IS_NOWHERE - -#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */ - -/* console configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * One partition type must be defined for part.c - * This is necessary for the fatls command to work on an SD card - * for example. - */ -#define CONFIG_DOS_PARTITION - -/* version string, parser, etc */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* Initial upstream - boot to cmd prompt only */ -#define CONFIG_BOOTCOMMAND "" - -/* Commands */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_BOOTZ -#define CONFIG_FAT_WRITE - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - -#endif /* __BCM28155_AP_H */ |