diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/at91sam9263ek.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/at91sam9263ek.h | 354 |
1 files changed, 0 insertions, 354 deletions
diff --git a/qemu/roms/u-boot/include/configs/at91sam9263ek.h b/qemu/roms/u-boot/include/configs/at91sam9263ek.h deleted file mode 100644 index 48c12ea88..000000000 --- a/qemu/roms/u-boot/include/configs/at91sam9263ek.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * Configuation settings for the AT91SAM9263EK board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -#ifndef CONFIG_SYS_USE_BOOT_NORFLASH -#define CONFIG_SYS_TEXT_BASE 0x21F00000 -#else -#define CONFIG_SYS_TEXT_BASE 0x0000000 -#endif - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */ - -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SYS_USE_BOOT_NORFLASH -#define CONFIG_SKIP_LOWLEVEL_INIT -#else -#define CONFIG_SYS_USE_NORFLASH -#endif - -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT - -/* - * Hardware drivers - */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO 1 -#define CONFIG_AT91_GPIO_PULLUP 1 - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -/* LCD */ -#define CONFIG_LCD 1 -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_SYS_WHITE_ON_BLACK 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PB7 /* the power led */ -#define CONFIG_GREEN_LED AT91_PIN_PB8 /* the user1 led */ -#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* the user2 led */ - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB 1 - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* MMC */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#endif - -/* FAT */ -#ifdef CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* NOR flash, if populated */ -#ifdef CONFIG_SYS_USE_NORFLASH -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_SYS_MONITOR_SEC 1:0-3 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE) - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ - "update=" \ - "protect off ${monitor_base} +${filesize};" \ - "erase ${monitor_base} +${filesize};" \ - "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ - "protect on ${monitor_base} +${filesize}\0" - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define MASTER_PLL_MUL 171 -#define MASTER_PLL_DIV 14 -#define MASTER_PLL_OUT 3 - -/* clocks */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLAR_29 | \ - AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ - AT91_PMC_PLLXR_PLLCOUNT(63) | \ - AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ - AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ - AT91_MATRIX_CSA_EBI_CS1A) - -/* SDRAM */ -/* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 0 -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (1 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (1 << 28)) /* Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ - AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ - AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_MR_URSTEN | \ - AT91_RSTC_MR_ERSTL(15)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xfff) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xfff)) - -#endif - -#else -#define CONFIG_SYS_NO_FLASH 1 -#endif - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 1 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 -#endif - -/* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) "\ - "rw rootfstype=jffs2" - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" -#endif - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif |