diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/am335x_igep0033.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/am335x_igep0033.h | 289 |
1 files changed, 0 insertions, 289 deletions
diff --git a/qemu/roms/u-boot/include/configs/am335x_igep0033.h b/qemu/roms/u-boot/include/configs/am335x_igep0033.h deleted file mode 100644 index c17327fef..000000000 --- a/qemu/roms/u-boot/include/configs/am335x_igep0033.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_IGEP0033_H -#define __CONFIG_IGEP0033_H - -#define CONFIG_AM33XX -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON - -#include <asm/arch/omap.h> - -/* Mach type */ -#define MACH_TYPE_IGEP0033 4521 /* Until the next sync */ -#define CONFIG_MACH_TYPE MACH_TYPE_IGEP0033 - -/* Clock defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "U-Boot# " -#define CONFIG_SYS_NO_FLASH - -/* Display cpuinfo */ -#define CONFIG_DISPLAY_CPUINFO - -/* Flattened Device Tree */ -#define CONFIG_OF_LIBFDT - -/* Commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -/* Make the verbose messages from UBI stop printing */ -#define CONFIG_UBI_SILENCE_MSG -#define CONFIG_UBIFS_SILENCE_MSG - -#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80F80000\0" \ - "dtbaddr=0x80200000\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "dtbfile=am335x-base0033.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "ubiroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "ubirootfstype=ubifs rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "ubiargs=setenv bootargs console=${console} " \ - "root=${ubiroot} " \ - "rootfstype=${ubirootfstype}\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ - "load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ - "ubiload=ubi part filesystem 2048; ubifsmount ubi0; " \ - "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \ - "ubifsload ${dtbaddr} ${bootdir}/${dtbfile} \0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ - "ubiboot=echo Booting from nand (ubifs) ...; " \ - "run ubiargs; run ubiload; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmcload; then " \ - "run mmcboot;" \ - "fi;" \ - "else " \ - "run ubiboot;" \ - "fi;" \ - -/* Max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) -/* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* MMC support */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* GPIO support */ -#define CONFIG_OMAP_GPIO - -/* Ethernet support */ -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI -#define CONFIG_PHYLIB -#define CONFIG_PHY_SMSC - -/* NAND support */ -#define CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_NAND_OMAP_ELM -#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_ONFI_DETECTION 1 -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x180000 /* environment starts here */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO - -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(spl),"\ - "1m(uboot),256k(environment),"\ - "-(filesystem)" - -/* Unsupported features */ -#undef CONFIG_USE_IRQ - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -/* - * Place the image at the start of the ROM defined image space. - * We limit our size to the ROM-defined downloaded image area, and use the - * rest of the space for stack. - */ -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" - -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_AM33XX_BCH -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#endif /* ! __CONFIG_IGEP0033_H */ |