diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/usb/host/isp116x.h')
| -rw-r--r-- | qemu/roms/u-boot/drivers/usb/host/isp116x.h | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/qemu/roms/u-boot/drivers/usb/host/isp116x.h b/qemu/roms/u-boot/drivers/usb/host/isp116x.h deleted file mode 100644 index 5b7afaf42..000000000 --- a/qemu/roms/u-boot/drivers/usb/host/isp116x.h +++ /dev/null @@ -1,476 +0,0 @@ -/* - * ISP116x register declarations and HCD data structures - * - * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> - * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it> - * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee> - * Portions: - * Copyright (C) 2004 Lothar Wassmann - * Copyright (C) 2004 Psion Teklogix - * Copyright (C) 2004 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifdef DEBUG -#define DBG(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#ifdef VERBOSE -# define VDBG DBG -#else -# define VDBG(fmt, args...) do {} while (0) -#endif - -#define ERR(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#define WARN(fmt, args...) \ - printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args) -#define INFO(fmt, args...) \ - printf("isp116x: " fmt "\n" , ## args) - -/* ------------------------------------------------------------------------- */ - -/* us of 1ms frame */ -#define MAX_LOAD_LIMIT 850 - -/* Full speed: max # of bytes to transfer for a single urb - at a time must be < 1024 && must be multiple of 64. - 832 allows transfering 4kiB within 5 frames. */ -#define MAX_TRANSFER_SIZE_FULLSPEED 832 - -/* Low speed: there is no reason to schedule in very big - chunks; often the requested long transfers are for - string descriptors containing short strings. */ -#define MAX_TRANSFER_SIZE_LOWSPEED 64 - -/* Bytetime (us), a rough indication of how much time it - would take to transfer a byte of useful data over USB */ -#define BYTE_TIME_FULLSPEED 1 -#define BYTE_TIME_LOWSPEED 20 - -/* Buffer sizes */ -#define ISP116x_BUF_SIZE 4096 -#define ISP116x_ITL_BUFSIZE 0 -#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE)) - -#define ISP116x_WRITE_OFFSET 0x80 - -/* --- ISP116x registers/bits ---------------------------------------------- */ - -#define HCREVISION 0x00 -#define HCCONTROL 0x01 -#define HCCONTROL_HCFS (3 << 6) /* host controller - functional state */ -#define HCCONTROL_USB_RESET (0 << 6) -#define HCCONTROL_USB_RESUME (1 << 6) -#define HCCONTROL_USB_OPER (2 << 6) -#define HCCONTROL_USB_SUSPEND (3 << 6) -#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */ -#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */ -#define HCCMDSTAT 0x02 -#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */ -#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */ -#define HCINTSTAT 0x03 -#define HCINT_SO (1 << 0) /* scheduling overrun */ -#define HCINT_WDH (1 << 1) /* writeback of done_head */ -#define HCINT_SF (1 << 2) /* start frame */ -#define HCINT_RD (1 << 3) /* resume detect */ -#define HCINT_UE (1 << 4) /* unrecoverable error */ -#define HCINT_FNO (1 << 5) /* frame number overflow */ -#define HCINT_RHSC (1 << 6) /* root hub status change */ -#define HCINT_OC (1 << 30) /* ownership change */ -#define HCINT_MIE (1 << 31) /* master interrupt enable */ -#define HCINTENB 0x04 -#define HCINTDIS 0x05 -#define HCFMINTVL 0x0d -#define HCFMREM 0x0e -#define HCFMNUM 0x0f -#define HCLSTHRESH 0x11 -#define HCRHDESCA 0x12 -#define RH_A_NDP (0x3 << 0) /* # downstream ports */ -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ -#define RH_A_DT (1 << 10) /* device type (mbz) */ -#define RH_A_OCPM (1 << 11) /* overcurrent protection - mode */ -#define RH_A_NOCP (1 << 12) /* no overcurrent protection */ -#define RH_A_POTPGT (0xff << 24) /* power on -> power good - time */ -#define HCRHDESCB 0x13 -#define RH_B_DR (0xffff << 0) /* device removable flags */ -#define RH_B_PPCM (0xffff << 16) /* port power control mask */ -#define HCRHSTATUS 0x14 -#define RH_HS_LPS (1 << 0) /* local power status */ -#define RH_HS_OCI (1 << 1) /* over current indicator */ -#define RH_HS_DRWE (1 << 15) /* device remote wakeup - enable */ -#define RH_HS_LPSC (1 << 16) /* local power status change */ -#define RH_HS_OCIC (1 << 17) /* over current indicator - change */ -#define RH_HS_CRWE (1 << 31) /* clear remote wakeup - enable */ -#define HCRHPORT1 0x15 -#define RH_PS_CCS (1 << 0) /* current connect status */ -#define RH_PS_PES (1 << 1) /* port enable status */ -#define RH_PS_PSS (1 << 2) /* port suspend status */ -#define RH_PS_POCI (1 << 3) /* port over current - indicator */ -#define RH_PS_PRS (1 << 4) /* port reset status */ -#define RH_PS_PPS (1 << 8) /* port power status */ -#define RH_PS_LSDA (1 << 9) /* low speed device attached */ -#define RH_PS_CSC (1 << 16) /* connect status change */ -#define RH_PS_PESC (1 << 17) /* port enable status change */ -#define RH_PS_PSSC (1 << 18) /* port suspend status - change */ -#define RH_PS_OCIC (1 << 19) /* over current indicator - change */ -#define RH_PS_PRSC (1 << 20) /* port reset status change */ -#define HCRHPORT_CLRMASK (0x1f << 16) -#define HCRHPORT2 0x16 -#define HCHWCFG 0x20 -#define HCHWCFG_15KRSEL (1 << 12) -#define HCHWCFG_CLKNOTSTOP (1 << 11) -#define HCHWCFG_ANALOG_OC (1 << 10) -#define HCHWCFG_DACK_MODE (1 << 8) -#define HCHWCFG_EOT_POL (1 << 7) -#define HCHWCFG_DACK_POL (1 << 6) -#define HCHWCFG_DREQ_POL (1 << 5) -#define HCHWCFG_DBWIDTH_MASK (0x03 << 3) -#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) -#define HCHWCFG_INT_POL (1 << 2) -#define HCHWCFG_INT_TRIGGER (1 << 1) -#define HCHWCFG_INT_ENABLE (1 << 0) -#define HCDMACFG 0x21 -#define HCDMACFG_BURST_LEN_MASK (0x03 << 5) -#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) -#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) -#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) -#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) -#define HCDMACFG_DMA_ENABLE (1 << 4) -#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) -#define HCDMACFG_CTR_SEL (1 << 2) -#define HCDMACFG_ITLATL_SEL (1 << 1) -#define HCDMACFG_DMA_RW_SELECT (1 << 0) -#define HCXFERCTR 0x22 -#define HCuPINT 0x24 -#define HCuPINT_SOF (1 << 0) -#define HCuPINT_ATL (1 << 1) -#define HCuPINT_AIIEOT (1 << 2) -#define HCuPINT_OPR (1 << 4) -#define HCuPINT_SUSP (1 << 5) -#define HCuPINT_CLKRDY (1 << 6) -#define HCuPINTENB 0x25 -#define HCCHIPID 0x27 -#define HCCHIPID_MASK 0xff00 -#define HCCHIPID_MAGIC 0x6100 -#define HCSCRATCH 0x28 -#define HCSWRES 0x29 -#define HCSWRES_MAGIC 0x00f6 -#define HCITLBUFLEN 0x2a -#define HCATLBUFLEN 0x2b -#define HCBUFSTAT 0x2c -#define HCBUFSTAT_ITL0_FULL (1 << 0) -#define HCBUFSTAT_ITL1_FULL (1 << 1) -#define HCBUFSTAT_ATL_FULL (1 << 2) -#define HCBUFSTAT_ITL0_DONE (1 << 3) -#define HCBUFSTAT_ITL1_DONE (1 << 4) -#define HCBUFSTAT_ATL_DONE (1 << 5) -#define HCRDITL0LEN 0x2d -#define HCRDITL1LEN 0x2e -#define HCITLPORT 0x40 -#define HCATLPORT 0x41 - -/* PTD accessor macros. */ -#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) -#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) -#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) -#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) -#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) -#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) -#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) -#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) -#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) -#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) -#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) -#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) -#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) -#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) -#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) -#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) -#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) -#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) -#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) -#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) -#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13) -#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK) -#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) -#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) -#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7) -#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK) - -/* Hardware transfer status codes -- CC from ptd->count */ -#define TD_CC_NOERROR 0x00 -#define TD_CC_CRC 0x01 -#define TD_CC_BITSTUFFING 0x02 -#define TD_CC_DATATOGGLEM 0x03 -#define TD_CC_STALL 0x04 -#define TD_DEVNOTRESP 0x05 -#define TD_PIDCHECKFAIL 0x06 -#define TD_UNEXPECTEDPID 0x07 -#define TD_DATAOVERRUN 0x08 -#define TD_DATAUNDERRUN 0x09 - /* 0x0A, 0x0B reserved for hardware */ -#define TD_BUFFEROVERRUN 0x0C -#define TD_BUFFERUNDERRUN 0x0D - /* 0x0E, 0x0F reserved for HCD */ -#define TD_NOTACCESSED 0x0F - -/* ------------------------------------------------------------------------- */ - -#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ -#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) - -/* Philips transfer descriptor */ -struct ptd { - u16 count; -#define PTD_COUNT_MSK (0x3ff << 0) -#define PTD_TOGGLE_MSK (1 << 10) -#define PTD_ACTIVE_MSK (1 << 11) -#define PTD_CC_MSK (0xf << 12) - u16 mps; -#define PTD_MPS_MSK (0x3ff << 0) -#define PTD_SPD_MSK (1 << 10) -#define PTD_LAST_MSK (1 << 11) -#define PTD_EP_MSK (0xf << 12) - u16 len; -#define PTD_LEN_MSK (0x3ff << 0) -#define PTD_DIR_MSK (3 << 10) -#define PTD_DIR_SETUP (0) -#define PTD_DIR_OUT (1) -#define PTD_DIR_IN (2) -#define PTD_B5_5_MSK (1 << 13) - u16 faddr; -#define PTD_FA_MSK (0x7f << 0) -#define PTD_FMT_MSK (1 << 7) -} __attribute__ ((packed, aligned(2))); - -struct isp116x_ep { - struct usb_device *udev; - struct ptd ptd; - - u8 maxpacket; - u8 epnum; - u8 nextpid; - - u16 length; /* of current packet */ - unsigned char *data; /* to databuf */ - - u16 error_count; -}; - -/* URB struct */ -#define N_URB_TD 48 -#define URB_DEL 1 -typedef struct { - struct isp116x_ep *ed; - void *transfer_buffer; /* (in) associated data buffer */ - int actual_length; /* (return) actual transfer length */ - unsigned long pipe; /* (in) pipe information */ -#if 0 - int state; -#endif -} urb_priv_t; - -struct isp116x_platform_data { - /* Enable internal resistors on downstream ports */ - unsigned sel15Kres:1; - /* On-chip overcurrent detection */ - unsigned oc_enable:1; - /* Enable wakeup by devices on usb bus (e.g. wakeup - by attachment/detachment or by device activity - such as moving a mouse). When chosen, this option - prevents stopping internal clock, increasing - thereby power consumption in suspended state. */ - unsigned remote_wakeup_enable:1; -}; - -struct isp116x { - u16 *addr_reg; - u16 *data_reg; - - struct isp116x_platform_data *board; - - struct dentry *dentry; - unsigned long stat1, stat2, stat4, stat8, stat16; - - /* Status flags */ - unsigned disabled:1; - unsigned sleeping:1; - - /* Root hub registers */ - u32 rhdesca; - u32 rhdescb; - u32 rhstatus; - u32 rhport[2]; - - /* Schedule for the current frame */ - struct isp116x_ep *atl_active; - int atl_buflen; - int atl_bufshrt; - int atl_last_dir; - int atl_finishing; -}; - -/* ------------------------------------------------- */ - -/* Inter-io delay (ns). The chip is picky about access timings; it - * expects at least: - * 150ns delay between consecutive accesses to DATA_REG, - * 300ns delay between access to ADDR_REG and DATA_REG - * OE, WE MUST NOT be changed during these intervals - */ -#if defined(UDELAY) -#define isp116x_delay(h,d) udelay(d) -#else -#define isp116x_delay(h,d) do {} while (0) -#endif - -static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) -{ - writew(reg & 0xff, isp116x->addr_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) -{ - writew(val, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) -{ - __raw_writew(val, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline u16 isp116x_read_data16(struct isp116x *isp116x) -{ - u16 val; - - val = readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - return val; -} - -static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x) -{ - u16 val; - - val = __raw_readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - return val; -} - -static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) -{ - writew(val & 0xffff, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - writew(val >> 16, isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); -} - -static inline u32 isp116x_read_data32(struct isp116x *isp116x) -{ - u32 val; - - val = (u32) readw(isp116x->data_reg); - isp116x_delay(isp116x, UDELAY); - val |= ((u32) readw(isp116x->data_reg)) << 16; - isp116x_delay(isp116x, UDELAY); - return val; -} - -/* Let's keep register access functions out of line. Hint: - we wait at least 150 ns at every access. -*/ -static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg) -{ - isp116x_write_addr(isp116x, reg); - return isp116x_read_data16(isp116x); -} - -static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg) -{ - isp116x_write_addr(isp116x, reg); - return isp116x_read_data32(isp116x); -} - -static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg, - unsigned val) -{ - isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); - isp116x_write_data16(isp116x, (u16) (val & 0xffff)); -} - -static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, - unsigned val) -{ - isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); - isp116x_write_data32(isp116x, (u32) val); -} - -/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */ - -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 - -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 |