diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/usb/host/ehci-faraday.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/usb/host/ehci-faraday.c | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-faraday.c b/qemu/roms/u-boot/drivers/usb/host/ehci-faraday.c deleted file mode 100644 index 3b761bc32..000000000 --- a/qemu/roms/u-boot/drivers/usb/host/ehci-faraday.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Faraday USB 2.0 EHCI Controller - * - * (C) Copyright 2010 Faraday Technology - * Dante Su <dantesu@faraday-tech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <usb.h> -#include <usb/fusbh200.h> -#include <usb/fotg210.h> - -#include "ehci.h" - -#ifndef CONFIG_USB_EHCI_BASE_LIST -#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE } -#endif - -union ehci_faraday_regs { - struct fusbh200_regs usb; - struct fotg210_regs otg; -}; - -static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs) -{ - return !readl(®s->usb.easstr); -} - -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) -{ - struct ehci_hccr *hccr; - struct ehci_hcor *hcor; - union ehci_faraday_regs *regs; - uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST; - - if (index < 0 || index >= ARRAY_SIZE(base_list)) - return -1; - regs = (void __iomem *)base_list[index]; - hccr = (struct ehci_hccr *)®s->usb.hccr; - hcor = (struct ehci_hcor *)®s->usb.hcor; - - if (ehci_is_fotg2xx(regs)) { - /* A-device bus reset */ - /* ... Power off A-device */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drop vbus and bus traffic */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* ... Power on A-device */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drive vbus and bus traffic */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* Disable OTG & DEV interrupts, triggered at level-high */ - writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr); - /* Clear all interrupt status */ - writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr); - } else { - /* Interrupt=level-high */ - setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH); - /* VBUS on */ - clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF); - /* Disable all interrupts */ - writel(0x00, ®s->usb.bmier); - writel(0x1f, ®s->usb.bmisr); - } - - *ret_hccr = hccr; - *ret_hcor = hcor; - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ - return 0; -} - -/* - * This ehci_set_usbmode() overrides the weak function - * in "ehci-hcd.c". - */ -void ehci_set_usbmode(int index) -{ - /* nothing needs to be done */ -} - -/* - * This ehci_get_port_speed() overrides the weak function - * in "ehci-hcd.c". - */ -int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) -{ - int spd, ret = PORTSC_PSPD_HS; - union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10); - - if (ehci_is_fotg2xx(regs)) - spd = OTGCSR_SPD(readl(®s->otg.otgcsr)); - else - spd = BMCSR_SPD(readl(®s->usb.bmcsr)); - - switch (spd) { - case 0: /* full speed */ - ret = PORTSC_PSPD_FS; - break; - case 1: /* low speed */ - ret = PORTSC_PSPD_LS; - break; - case 2: /* high speed */ - ret = PORTSC_PSPD_HS; - break; - default: - printf("ehci-faraday: invalid device speed\n"); - break; - } - - return ret; -} - -/* - * This ehci_get_portsc_register() overrides the weak function - * in "ehci-hcd.c". - */ -uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port) -{ - /* Faraday EHCI has one and only one portsc register */ - if (port) { - /* Printing the message would cause a scan failure! */ - debug("The request port(%d) is not configured\n", port); - return NULL; - } - - /* Faraday EHCI PORTSC register offset is 0x20 from hcor */ - return (uint32_t *)((uint8_t *)hcor + 0x20); -} |