diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/mtd/nand/fsl_elbc_spl.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/nand/fsl_elbc_spl.c | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/qemu/roms/u-boot/drivers/mtd/nand/fsl_elbc_spl.c b/qemu/roms/u-boot/drivers/mtd/nand/fsl_elbc_spl.c deleted file mode 100644 index 29521359a..000000000 --- a/qemu/roms/u-boot/drivers/mtd/nand/fsl_elbc_spl.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine - * - * (C) Copyright 2006-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Copyright (c) 2008 Freescale Semiconductor, Inc. - * Author: Scott Wood <scottwood@freescale.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/fsl_lbc.h> -#include <nand.h> - -#define WINDOW_SIZE 8192 - -static void nand_wait(void) -{ - fsl_lbc_t *regs = LBC_BASE_ADDR; - - for (;;) { - uint32_t status = in_be32(®s->ltesr); - - if (status == 1) - return; - - if (status & 1) { - puts("read failed (ltesr)\n"); - for (;;); - } - } -} - -#ifdef CONFIG_TPL_BUILD -int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) -#else -static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) -#endif -{ - fsl_lbc_t *regs = LBC_BASE_ADDR; - uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; - const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS; - const int block_shift = large ? 17 : 14; - const int block_size = 1 << block_shift; - const int page_size = large ? 2048 : 512; - const int bad_marker = large ? page_size + 0 : page_size + 5; - int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; - int pos = 0; - char *dst = vdst; - - if (offs & (block_size - 1)) { - puts("bad offset\n"); - for (;;); - } - - if (large) { - fmr |= FMR_ECCM; - out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | - (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); - out_be32(®s->fir, - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_CW1 << FIR_OP3_SHIFT) | - (FIR_OP_RBW << FIR_OP4_SHIFT)); - } else { - out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); - out_be32(®s->fir, - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_RBW << FIR_OP3_SHIFT)); - } - - out_be32(®s->fbcr, 0); - clrsetbits_be32(®s->bank[0].br, BR_DECC, BR_DECC_CHK_GEN); - - while (pos < uboot_size) { - int i = 0; - out_be32(®s->fbar, offs >> block_shift); - - do { - int j; - unsigned int page_offs = (offs & (block_size - 1)) << 1; - - out_be32(®s->ltesr, ~0); - out_be32(®s->lteatr, 0); - out_be32(®s->fpar, page_offs); - out_be32(®s->fmr, fmr); - out_be32(®s->lsor, 0); - nand_wait(); - - page_offs %= WINDOW_SIZE; - - /* - * If either of the first two pages are marked bad, - * continue to the next block. - */ - if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) { - puts("skipping\n"); - offs = (offs + block_size) & ~(block_size - 1); - pos &= ~(block_size - 1); - break; - } - - for (j = 0; j < page_size; j++) - dst[pos + j] = buf[page_offs + j]; - - pos += page_size; - offs += page_size; - } while ((offs & (block_size - 1)) && (pos < uboot_size)); - } - - return 0; -} - -/* - * Defines a static function nand_load_image() here, because non-static makes - * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) - */ -#ifndef CONFIG_TPL_BUILD -#define nand_spl_load_image(offs, uboot_size, vdst) \ - nand_load_image(offs, uboot_size, vdst) -#endif - -/* - * The main entry for NAND booting. It's necessary that SDRAM is already - * configured and available since this code loads the main U-Boot image - * from NAND into SDRAM and starts it from there. - */ -void nand_boot(void) -{ - __attribute__((noreturn)) void (*uboot)(void); - /* - * Load U-Boot image from NAND into RAM - */ - nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, - CONFIG_SYS_NAND_U_BOOT_SIZE, - (void *)CONFIG_SYS_NAND_U_BOOT_DST); - -#ifdef CONFIG_NAND_ENV_DST - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST); - -#ifdef CONFIG_ENV_OFFSET_REDUND - nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); -#endif -#endif - -#ifdef CONFIG_SPL_FLUSH_IMAGE - /* - * Clean d-cache and invalidate i-cache, to - * make sure that no stale data is executed. - */ - flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); -#endif - - puts("transfering control\n"); - /* - * Jump to U-Boot image - */ - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - (*uboot)(); -} |