diff options
Diffstat (limited to 'qemu/roms/u-boot/doc/README.watchdog')
| -rw-r--r-- | qemu/roms/u-boot/doc/README.watchdog | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/qemu/roms/u-boot/doc/README.watchdog b/qemu/roms/u-boot/doc/README.watchdog deleted file mode 100644 index 59f306b85..000000000 --- a/qemu/roms/u-boot/doc/README.watchdog +++ /dev/null @@ -1,35 +0,0 @@ -Watchdog driver general info - -CONFIG_HW_WATCHDOG - This enables hw_watchdog_reset to be called during various loops, - including waiting for a character on a serial port. But it - does not also call hw_watchdog_init. Boards which want this - enabled must call this function in their board file. This split - is useful because some rom's enable the watchdog when downloading - new code, so it must be serviced, but the board would rather it - was off. And, it cannot always be turned off once on. - -CONFIG_WATCHDOG_TIMEOUT_MSECS - Can be used to change the timeout for i.mx31/35/5x/6x. - If not given, will default to maximum timeout. This would - be 128000 msec for i.mx31/35/5x/6x. - -CONFIG_AT91SAM9_WATCHDOG - Available for AT91SAM9 to service the watchdog. - -CONFIG_FTWDT010_WATCHDOG - Available for FTWDT010 to service the watchdog. - -CONFIG_FTWDT010_HW_TIMEOUT - Can be used to change the timeout for FTWDT010. - -CONFIG_IMX_WATCHDOG - Available for i.mx31/35/5x/6x to service the watchdog. This is not - automatically set because some boards (vision2) still need to define - their own hw_watchdog_reset routine. - -CONFIG_XILINX_TB_WATCHDOG - Available for Xilinx Axi platforms to service timebase watchdog timer. - -CONFIG_BFIN_WATCHDOG - Available for bf5xx and bf6xx to service the watchdog. |