1 files changed, 0 insertions, 98 deletions
diff --git a/qemu/roms/u-boot/doc/README.mpc83xxads b/qemu/roms/u-boot/doc/README.mpc83xxads
deleted file mode 100644
index d4561034b..000000000
--- a/qemu/roms/u-boot/doc/README.mpc83xxads
+++ /dev/null
@@ -1,98 +0,0 @@
-Freescale MPC83xx ADS Boards
------------------------------------------
-
-0. Toolchain / Building
-
-    $ PATH=$PATH:/usr/powerpc/bin
-    $ CROSS_COMPILE=powerpc-linux-
-    $ export PATH CROSS_COMPILE
-
-    $ powerpc-linux-gcc -v
-    Reading specs from /usr/powerpc/lib/gcc/powerpc-linux/3.4.3/specs
-    Configured with: ../configure --prefix=/usr/powerpc
-    --exec-prefix=/usr/powerpc --target=powerpc-linux --enable-shared
-    --disable-nls --disable-multilib --enable-languages=c,c++,ada,f77,objc
-    Thread model: posix
-    gcc version 3.4.3 (Debian)
-
-    $ powerpc-linux-as -v
-    GNU assembler version 2.15 (powerpc-linux) using BFD version 2.15
-
-
-    $ make MPC8349ADS_config
-    Configuring for MPC8349ADS board...
-
-    $ make
-
-
-1. Board Switches and Jumpers
-
-
-2. Memory Map
-
-2.1. The memory map should look pretty much like this:
-
-     0x0000_0000     0x7fff_ffff     DDR		     2G
-     0x8000_0000     0x9fff_ffff     PCI MEM		     512M
-     0xc000_0000     0xdfff_ffff     Rapid IO		     512M
-     0xe000_0000     0xe00f_ffff     CCSR		     1M
-     0xe200_0000     0xe2ff_ffff     PCI IO		     16M
-     0xf000_0000     0xf7ff_ffff     SDRAM		     128M
-     0xf800_0000     0xf80f_ffff     BCSR		     1M
-     0xfe00_0000     0xffff_ffff     FLASH (boot bank)	     16M
-
-
-3. Definitions
-
-3.1 Explanation of NEW definitions in:
-
-	include/configs/MPC8349ADS.h
-
-    CONFIG_MPC83xx	    MPC83xx family
-    CONFIG_MPC8349	    MPC8349 specific
-    CONFIG_MPC8349ADS	    MPC8349ADS board specific
-    CONFIG_TSEC_ENET	    Use on-chip 10/100/1000 ethernet
-
-
-4. Compilation
-
-    Assuming you're using BASH shell:
-
-	export CROSS_COMPILE=your-cross-compile-prefix
-	cd u-boot
-	make distclean
-	make MPC8349ADS_config
-	make
-
-5. Downloading and Flashing Images
-
-5.0 Download over serial line using Kermit:
-
-	loadb
-	[Drop to kermit:
-	    ^\c
-	    send <u-boot-bin-image>
-	    c
-	]
-
-
-    Or via tftp:
-
-	tftp 10000 u-boot.bin
-
-5.1 Reflash U-boot Image using U-boot
-
-    tftp 10000 u-boot.bin
-    protect off fe000000 fe09ffff
-    erase fe000000 fe09ffff
-
-    cp.b 10000 fe000000 xxxx
-or
-    cp.b 10000 fe000000 a0000
-
-You might have to supply the correct byte count for 'xxxx' from
-the TFTP.  Maybe a0000 will work too, that corresponds to the
-erased sectors.
-
-
-6. Notes