summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/board/ti/dra7xx/evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/board/ti/dra7xx/evm.c')
-rw-r--r--qemu/roms/u-boot/board/ti/dra7xx/evm.c263
1 files changed, 0 insertions, 263 deletions
diff --git a/qemu/roms/u-boot/board/ti/dra7xx/evm.c b/qemu/roms/u-boot/board/ti/dra7xx/evm.c
deleted file mode 100644
index 073d15127..000000000
--- a/qemu/roms/u-boot/board/ti/dra7xx/evm.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * (C) Copyright 2013
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * Lokesh Vutla <lokeshvutla@ti.com>
- *
- * Based on previous work by:
- * Aneesh V <aneesh@ti.com>
- * Steve Sakoman <steve@sakoman.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <palmas.h>
-#include <sata.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sata.h>
-#include <environment.h>
-
-#include "mux_data.h"
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-#include <cpsw.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct omap_sysinfo sysinfo = {
- "Board: DRA7xx\n"
-};
-
-/*
- * Adjust I/O delays on the Tx control and data lines of each MAC port. This
- * is a workaround in order to work properly with the DP83865 PHYs on the EVM.
- * In 3COM RGMII mode this PHY applies it's own internal clock delay, so we
- * essentially need to counteract the DRA7xx internal delay, and we do this
- * by delaying the control and data lines. If not using this PHY, you probably
- * don't need to do this stuff!
- */
-static void dra7xx_adj_io_delay(const struct io_delay *io_dly)
-{
- int i = 0;
- u32 reg_val;
- u32 delta;
- u32 coarse;
- u32 fine;
-
- writel(CFG_IO_DELAY_UNLOCK_KEY, CFG_IO_DELAY_LOCK);
-
- while(io_dly[i].addr) {
- writel(CFG_IO_DELAY_ACCESS_PATTERN & ~CFG_IO_DELAY_LOCK_MASK,
- io_dly[i].addr);
- delta = io_dly[i].dly;
- reg_val = readl(io_dly[i].addr) & 0x3ff;
- coarse = ((reg_val >> 5) & 0x1F) + ((delta >> 5) & 0x1F);
- coarse = (coarse > 0x1F) ? (0x1F) : (coarse);
- fine = (reg_val & 0x1F) + (delta & 0x1F);
- fine = (fine > 0x1F) ? (0x1F) : (fine);
- reg_val = CFG_IO_DELAY_ACCESS_PATTERN |
- CFG_IO_DELAY_LOCK_MASK |
- ((coarse << 5) | (fine));
- writel(reg_val, io_dly[i].addr);
- i++;
- }
-
- writel(CFG_IO_DELAY_LOCK_KEY, CFG_IO_DELAY_LOCK);
-}
-
-/**
- * @brief board_init
- *
- * @return 0
- */
-int board_init(void)
-{
- gpmc_init();
- gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
-
- return 0;
-}
-
-int board_late_init(void)
-{
- init_sata(0);
- return 0;
-}
-
-/**
- * @brief misc_init_r - Configure EVM board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
- return 0;
-}
-
-static void do_set_mux32(u32 base,
- struct pad_conf_entry const *array, int size)
-{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
-
- for (i = 0; i < size; i++, pad++)
- writel(pad->val, base + pad->offset);
-}
-
-void set_muxconf_regs_essential(void)
-{
- do_set_mux32((*ctrl)->control_padconf_core_base,
- core_padconf_array_essential,
- sizeof(core_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-}
-
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
-int board_mmc_init(bd_t *bis)
-{
- omap_mmc_init(0, 0, 0, -1, -1);
- omap_mmc_init(1, 0, 0, -1, -1);
- return 0;
-}
-#endif
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- if (serial_tstc() && serial_getc() == 'c')
- return 1;
-
-#ifdef CONFIG_SPL_ENV_SUPPORT
- env_init();
- env_relocate_spec();
- if (getenv_yesno("boot_os") != 1)
- return 1;
-#endif
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-/* Delay value to add to calibrated value */
-#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
-#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
-#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
-#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
-#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
-#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
-#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
-#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
-#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
-#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
-
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_addr = 2,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_addr = 3,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
- int ret;
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
- uint32_t ctrl_val;
- const struct io_delay io_dly[] = {
- {CFG_RGMII0_TXCTL, RGMII0_TXCTL_DLY_VAL},
- {CFG_RGMII0_TXD0, RGMII0_TXD0_DLY_VAL},
- {CFG_RGMII0_TXD1, RGMII0_TXD1_DLY_VAL},
- {CFG_RGMII0_TXD2, RGMII0_TXD2_DLY_VAL},
- {CFG_RGMII0_TXD3, RGMII0_TXD3_DLY_VAL},
- {CFG_VIN2A_D13, VIN2A_D13_DLY_VAL},
- {CFG_VIN2A_D17, VIN2A_D17_DLY_VAL},
- {CFG_VIN2A_D16, VIN2A_D16_DLY_VAL},
- {CFG_VIN2A_D15, VIN2A_D15_DLY_VAL},
- {CFG_VIN2A_D14, VIN2A_D14_DLY_VAL},
- {0}
- };
-
- /* Adjust IO delay for RGMII tx path */
- dra7xx_adj_io_delay(io_dly);
-
- /* try reading mac address from efuse */
- mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
- mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
- mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = mac_hi & 0xFF;
- mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
- mac_addr[4] = (mac_lo & 0xFF00) >> 8;
- mac_addr[5] = mac_lo & 0xFF;
-
- if (!getenv("ethaddr")) {
- printf("<ethaddr> not set. Validating first E-fuse MAC\n");
-
- if (is_valid_ether_addr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- }
-
- mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
- mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
- mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = mac_hi & 0xFF;
- mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
- mac_addr[4] = (mac_lo & 0xFF00) >> 8;
- mac_addr[5] = mac_lo & 0xFF;
-
- if (!getenv("eth1addr")) {
- if (is_valid_ether_addr(mac_addr))
- eth_setenv_enetaddr("eth1addr", mac_addr);
- }
-
- ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
- ctrl_val |= 0x22;
- writel(ctrl_val, (*ctrl)->control_core_control_io1);
-
- ret = cpsw_register(&cpsw_data);
- if (ret < 0)
- printf("Error %d registering CPSW switch\n", ret);
-
- return ret;
-}
-#endif