3 files changed, 0 insertions, 207 deletions
diff --git a/qemu/roms/u-boot/board/samsung/smdk5420/Makefile b/qemu/roms/u-boot/board/samsung/smdk5420/Makefile
deleted file mode 100644
index c2f8886c9..000000000
--- a/qemu/roms/u-boot/board/samsung/smdk5420/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Copyright (C) 2013 Samsung Electronics
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= smdk5420_spl.o
-
-ifndef CONFIG_SPL_BUILD
-obj-y	+= smdk5420.o
-endif
diff --git a/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420.c b/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420.c
deleted file mode 100644
index e4606ecd2..000000000
--- a/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include <lcd.h>
-#include <spi.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/dp_info.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_USB_EHCI_EXYNOS
-static int board_usb_vbus_init(void)
-{
-	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
-						samsung_get_base_gpio_part1();
-
-	/* Enable VBUS power switch */
-	s5p_gpio_direction_output(&gpio1->x2, 6, 1);
-
-	/* VBUS turn ON time */
-	mdelay(3);
-
-	return 0;
-}
-#endif
-
-int exynos_init(void)
-{
-#ifdef CONFIG_USB_EHCI_EXYNOS
-	board_usb_vbus_init();
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_LCD
-void cfg_lcd_gpio(void)
-{
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
-
-	/* For Backlight */
-	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
-	s5p_gpio_set_value(&gpio1->b2, 0, 1);
-
-	/* LCD power on */
-	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
-	s5p_gpio_set_value(&gpio1->x1, 5, 1);
-
-	/* Set Hotplug detect for DP */
-	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
-}
-
-vidinfo_t panel_info = {
-	.vl_freq	= 60,
-	.vl_col		= 2560,
-	.vl_row		= 1600,
-	.vl_width	= 2560,
-	.vl_height	= 1600,
-	.vl_clkp	= CONFIG_SYS_LOW,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_LOW,
-	.vl_bpix	= 4,	/* LCD_BPP = 2^4, for output conosle on LCD */
-
-	/* wDP panel timing infomation */
-	.vl_hspw	= 32,
-	.vl_hbpd	= 80,
-	.vl_hfpd	= 48,
-
-	.vl_vspw	= 6,
-	.vl_vbpd	= 37,
-	.vl_vfpd	= 3,
-	.vl_cmd_allow_len = 0xf,
-
-	.win_id		= 3,
-	.cfg_gpio	= cfg_lcd_gpio,
-	.backlight_on	= NULL,
-	.lcd_power_on	= NULL,
-	.reset_lcd	= NULL,
-	.dual_lcd_enabled = 0,
-
-	.init_delay	= 0,
-	.power_on_delay = 0,
-	.reset_delay	= 0,
-	.interface_mode = FIMD_RGB_INTERFACE,
-	.dp_enabled	= 1,
-};
-
-static struct edp_device_info edp_info = {
-	.disp_info = {
-		.h_res = 2560,
-		.h_sync_width = 32,
-		.h_back_porch = 80,
-		.h_front_porch = 48,
-		.v_res = 1600,
-		.v_sync_width  = 6,
-		.v_back_porch = 37,
-		.v_front_porch = 3,
-		.v_sync_rate = 60,
-	},
-	.lt_info = {
-		.lt_status = DP_LT_NONE,
-	},
-	.video_info = {
-		.master_mode = 0,
-		.bist_mode = DP_DISABLE,
-		.bist_pattern = NO_PATTERN,
-		.h_sync_polarity = 0,
-		.v_sync_polarity = 0,
-		.interlaced = 0,
-		.color_space = COLOR_RGB,
-		.dynamic_range = VESA,
-		.ycbcr_coeff = COLOR_YCBCR601,
-		.color_depth = COLOR_8,
-	},
-};
-
-static struct exynos_dp_platform_data dp_platform_data = {
-	.phy_enable	= set_dp_phy_ctrl,
-	.edp_dev_info	= &edp_info,
-};
-
-void init_panel_info(vidinfo_t *vid)
-{
-	vid->rgb_mode   = MODE_RGB_P;
-
-	exynos_set_dp_platform_data(&dp_platform_data);
-}
-#endif
-
-int board_get_revision(void)
-{
-	return 0;
-}
diff --git a/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420_spl.c b/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420_spl.c
deleted file mode 100644
index 73359f784..000000000
--- a/qemu/roms/u-boot/board/samsung/smdk5420/smdk5420_spl.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2013 The Chromium OS Authors.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/spl.h>
-#include <asm/arch/clk.h>
-
-#define SIGNATURE	0xdeadbeef
-
-/* Parameters of early board initialization in SPL */
-static struct spl_machine_param machine_param
-		__attribute__((section(".machine_param"))) = {
-	.signature	= SIGNATURE,
-	.version	= 1,
-	.params		= "vmubfasirM",
-	.size		= sizeof(machine_param),
-
-	.mem_iv_size	= 0x1f,
-	.mem_type	= DDR_MODE_DDR3,
-
-	/*
-	 * Set uboot_size to 0x100000 bytes.
-	 *
-	 * This is an overly conservative value chosen to accommodate all
-	 * possible U-Boot image.  You are advised to set this value to a
-	 * smaller realistic size via scripts that modifies the .machine_param
-	 * section of output U-Boot image.
-	 */
-	.uboot_size	= 0x100000,
-
-	.boot_source	= BOOT_MODE_OM,
-	.frequency_mhz	= 800,
-	.arm_freq_mhz	= 900,
-	.serial_base	= 0x12c30000,
-	.i2c_base	= 0x12c60000,
-	.mem_manuf	= MEM_MANUF_SAMSUNG,
-};
-
-struct spl_machine_param *spl_get_machine_params(void)
-{
-	if (machine_param.signature != SIGNATURE) {
-		/* Will hang if SIGNATURE dont match */
-		while (1)
-			;
-	}
-
-	return &machine_param;
-}