1 files changed, 0 insertions, 78 deletions
diff --git a/qemu/roms/u-boot/board/nvidia/cardhu/cardhu.c b/qemu/roms/u-boot/board/nvidia/cardhu/cardhu.c
deleted file mode 100644
index cc0e5e130..000000000
--- a/qemu/roms/u-boot/board/nvidia/cardhu/cardhu.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  (C) Copyright 2010-2013
- *  NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/gp_padctrl.h>
-#include "pinmux-config-cardhu.h"
-#include <i2c.h>
-
-#define PMU_I2C_ADDRESS		0x2D
-#define MAX_I2C_RETRY		3
-
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_config_pingrp_table(tegra3_pinmux_common,
-		ARRAY_SIZE(tegra3_pinmux_common));
-
-	pinmux_config_pingrp_table(unused_pins_lowpower,
-		ARRAY_SIZE(unused_pins_lowpower));
-
-	/* Initialize any non-default pad configs (APB_MISC_GP regs) */
-	pinmux_config_drvgrp_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl));
-}
-
-#if defined(CONFIG_TEGRA_MMC)
-/*
- * Do I2C/PMU writes to bring up SD card bus power
- *
- */
-void board_sdmmc_voltage_init(void)
-{
-	uchar reg, data_buffer[1];
-	int i;
-
-	i2c_set_bus_num(0);	/* PMU is on bus 0 */
-
-	/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
-	data_buffer[0] = 0x65;
-	reg = 0x32;
-
-	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-			udelay(100);
-	}
-
-	/* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */
-	data_buffer[0] = 0x09;
-	reg = 0x67;
-
-	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-			udelay(100);
-	}
-}
-
-/*
- * Routine: pin_mux_mmc
- * Description: setup the MMC muxes, power rails, etc.
- */
-void pin_mux_mmc(void)
-{
-	/*
-	 * NOTE: We don't do mmc-specific pin muxes here.
-	 * They were done globally in pinmux_init().
-	 */
-
-	/* Bring up the SDIO1 power rail */
-	board_sdmmc_voltage_init();
-}
-#endif	/* MMC */