1 files changed, 0 insertions, 122 deletions
diff --git a/qemu/roms/u-boot/board/freescale/t104xrdb/spl.c b/qemu/roms/u-boot/board/freescale/t104xrdb/spl.c
deleted file mode 100644
index c628c95f2..000000000
--- a/qemu/roms/u-boot/board/freescale/t104xrdb/spl.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L3_SIZE;
-}
-
-unsigned long get_board_sys_clk(void)
-{
-	return CONFIG_SYS_CLK_FREQ;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
-	return CONFIG_DDR_CLK_FREQ;
-}
-
-#define FSL_CORENET_CCSR_PORSR1_RCW_MASK	0xFF800000
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, sys_clk, uart_clk;
-#ifdef CONFIG_SPL_NAND_BOOT
-	u32 porsr1, pinctl;
-#endif
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#ifdef CONFIG_SPL_NAND_BOOT
-	/*
-	 * There is T1040 SoC issue where NOR, FPGA are inaccessible during
-	 * NAND boot because IFC signals > IFC_AD7 are not enabled.
-	 * This workaround changes RCW source to make all signals enabled.
-	 */
-	porsr1 = in_be32(&gur->porsr1);
-	pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) | 0x24800000);
-	out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000), pinctl);
-#endif
-
-	/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
-	memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
-
-	/* Update GD pointer */
-	gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
-
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("" : : : "memory");
-
-	console_init_f();
-
-	/* initialize selected port with appropriate baud rate */
-	sys_clk = get_board_sys_clk();
-	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
-	uart_clk = sys_clk * plat_ratio / 2;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     uart_clk / 16 / CONFIG_BAUDRATE);
-
-	relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	bd_t *bd;
-
-	bd = (bd_t *)(gd + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L3_SIZE;
-
-	probecpu();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
-	spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
-	gd->env_valid = 1;
-
-	i2c_init_all();
-
-	puts("\n\n");
-
-	gd->ram_size = initdram(0);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}