1 files changed, 0 insertions, 140 deletions
diff --git a/qemu/roms/u-boot/board/freescale/p2041rdb/ddr.c b/qemu/roms/u-boot/board/freescale/p2041rdb/ddr.c
deleted file mode 100644
index b8bbcdf2a..000000000
--- a/qemu/roms/u-boot/board/freescale/p2041rdb/ddr.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- *
- * ranges for parameters:
- *  wr_data_delay = 0-6
- *  clk adjust = 0-8
- *  cpo 2-0x1E (30)
- */
-static const struct board_specific_parameters dimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz|adjst| start | delay|
-	 */
-	{2,   750,    3,     5,   0xff,    2,  0},
-	{2,  1250,    4,     6,   0xff,    2,  0},
-	{2,  1350,    5,     7,   0xff,    2,  0},
-	{2,  1666,    5,     8,   0xff,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	pbsp = dimm0;
-
-	/*
-	 * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->twot_en = pbsp->force_2t;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->twot_en = pbsp_highest->force_2t;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-found:
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	/* Write leveling override */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/* Rtt and Rtt_WR override */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 60 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-}
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-	if (fsl_use_spd()) {
-		puts("using SPD\n");
-		dram_size = fsl_ddr_sdram();
-	} else {
-		puts("no SPD and fixed parameters\n");
-		return dram_size;
-	}
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	debug("    DDR: ");
-	return dram_size;
-}