3 files changed, 0 insertions, 161 deletions
diff --git a/qemu/roms/u-boot/board/davinci/dm365evm/Makefile b/qemu/roms/u-boot/board/davinci/dm365evm/Makefile
deleted file mode 100644
index d35d81c2b..000000000
--- a/qemu/roms/u-boot/board/davinci/dm365evm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dm365evm.o
diff --git a/qemu/roms/u-boot/board/davinci/dm365evm/config.mk b/qemu/roms/u-boot/board/davinci/dm365evm/config.mk
deleted file mode 100644
index 7b1e900e8..000000000
--- a/qemu/roms/u-boot/board/davinci/dm365evm/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Spectrum Digital DM365 EVM board
-#	DM365 EVM board has 1 bank of 128 MB DDR RAM
-#	Physical Address: 8000'0000 to 8800'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/qemu/roms/u-boot/board/davinci/dm365evm/dm365evm.c b/qemu/roms/u-boot/board/davinci/dm365evm/dm365evm.c
deleted file mode 100644
index ceffd4d60..000000000
--- a/qemu/roms/u-boot/board/davinci/dm365evm/dm365evm.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emif_defs.h>
-#include <asm/arch/nand_defs.h>
-#include <asm/arch/gpio.h>
-#include <netdev.h>
-#include <asm/arch/davinci_misc.h>
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM365_EVM;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-int board_eth_init(bd_t *bis)
-{
-	uint8_t eeprom_enetaddr[6];
-	int i;
-	struct davinci_gpio *gpio1_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
-
-	/* Configure PINMUX 3 to enable EMAC pins */
-	writel((readl(PINMUX3) | 0x1affff), PINMUX3);
-
-	/* Configure GPIO20 as output */
-	writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir);
-
-	/* Toggle GPIO 20 */
-	for (i = 0; i < 20; i++) {
-		/* GPIO 20 low */
-		writel((readl(&gpio1_base->out_data) & ~(1 << 20)),
-						&gpio1_base->out_data);
-
-		udelay(1000);
-
-		/* GPIO 20 high */
-		writel((readl(&gpio1_base->out_data) | (1 << 20)),
-						&gpio1_base->out_data);
-	}
-
-	/* Configure I2C pins so that EEPROM can be read */
-	writel((readl(PINMUX3) | 0x01400000), PINMUX3);
-
-	/* Read Ethernet MAC address from EEPROM */
-	if (dvevm_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	davinci_emac_initialize();
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip	*this = mtd->priv;
-	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
-	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
-
-	if (chip == 1) {
-		__set_bit(14, &wbase);
-		__set_bit(14, &rbase);
-	} else {
-		__clear_bit(14, &wbase);
-		__clear_bit(14, &rbase);
-	}
-	this->IO_ADDR_W = (void *)wbase;
-	this->IO_ADDR_R = (void *)rbase;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-	nand->select_chip = nand_dm365evm_select_chip;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.input_clk	= 121500000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-static struct davinci_mmc mmc_sd1 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
-	.input_clk	= 121500000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_2,
-};
-#endif
-
-int board_mmc_init(bd_t *bis)
-{
-	int err;
-
-	/* Add slot-0 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd0);
-	if (err)
-		return err;
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-#define PUPDCTL1		0x01c4007c
-	/* PINMUX(4)-DAT0-3/CMD;  PINMUX(0)-CLK */
-	writel((readl(PINMUX4) | 0x55400000), PINMUX4);
-	writel((readl(PINMUX0) | 0x00010000), PINMUX0);
-
-	/* Configure MMC/SD pins as pullup */
-	writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1);
-
-	/* Add slot-1 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd1);
-#endif
-
-	return err;
-}
-#endif