1 files changed, 0 insertions, 86 deletions
diff --git a/qemu/roms/u-boot/board/davinci/dm355leopard/dm355leopard.c b/qemu/roms/u-boot/board/davinci/dm355leopard/dm355leopard.c
deleted file mode 100644
index 534184329..000000000
--- a/qemu/roms/u-boot/board/davinci/dm355leopard/dm355leopard.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/nand_defs.h>
-#include <asm/arch/davinci_misc.h>
-#include <net.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	struct davinci_gpio *gpio01_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
-	struct davinci_gpio *gpio23_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK23;
-	struct davinci_gpio *gpio67_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
-
-	gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* GIO 9 & 10 are used for IO */
-	writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3);
-
-	/* Interrupt set GIO 9 */
-	writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN);
-
-	/* set GIO 9 input */
-	writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir);
-
-	/* Both edge trigger GIO 9 */
-	writel((readl(&gpio01_base->set_rising) | (1 << 9)),
-						&gpio01_base->set_rising);
-	writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir);
-
-	/* output low */
-	writel((readl(&gpio01_base->set_data) & ~(1 << 5)),
-						&gpio01_base->set_data);
-
-	/* set GIO 10 output */
-	writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir);
-
-	/* output high */
-	writel((readl(&gpio01_base->set_data) | (1 << 10)),
-						&gpio01_base->set_data);
-
-	/* set GIO 32 output */
-	writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir);
-
-	/* output High */
-	writel((readl(&gpio23_base->set_data) | (1 << 0)),
-						&gpio23_base->set_data);
-
-	/* Enable UART1 MUX Lines */
-	writel((readl(PINMUX0) & ~3), PINMUX0);
-	writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir);
-	writel((readl(&gpio67_base->set_data) | (1 << 6)),
-						&gpio67_base->set_data);
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif