summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/board/amcc/makalu
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/board/amcc/makalu')
-rw-r--r--qemu/roms/u-boot/board/amcc/makalu/Makefile9
-rw-r--r--qemu/roms/u-boot/board/amcc/makalu/cmd_pll.c279
-rw-r--r--qemu/roms/u-boot/board/amcc/makalu/init.S15
-rw-r--r--qemu/roms/u-boot/board/amcc/makalu/makalu.c223
4 files changed, 526 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/amcc/makalu/Makefile b/qemu/roms/u-boot/board/amcc/makalu/Makefile
new file mode 100644
index 000000000..dcf162ca9
--- /dev/null
+++ b/qemu/roms/u-boot/board/amcc/makalu/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = makalu.o cmd_pll.o
+obj-y += init.o
diff --git a/qemu/roms/u-boot/board/amcc/makalu/cmd_pll.c b/qemu/roms/u-boot/board/amcc/makalu/cmd_pll.c
new file mode 100644
index 000000000..f12655bea
--- /dev/null
+++ b/qemu/roms/u-boot/board/amcc/makalu/cmd_pll.c
@@ -0,0 +1,279 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep 5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET 0
+#define EEPROM_TEST_OFFSET 16
+#define EEPROM_SDSTP_PARAM 16
+
+#define PLL_NAME_MAX 12
+#define BUF_STEP 8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq) \
+ do { \
+ int __i; \
+ for (__i = 0; __i < 2; __i++) \
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \
+ EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+ pll_select[freq], \
+ BUF_STEP + __i*BUF_STEP); \
+ } while (0)
+
+#define PDEBUG
+#ifdef PDEBUG
+#define PLL_DEBUG pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+ PLL_ebc20,
+ PLL_333,
+ PLL_4001,
+ PLL_4002,
+ PLL_533,
+ PLL_600,
+ PLL_666, /* For now, kilauea can't support */
+ RCONF,
+ WTEST,
+ PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+ "PLL_ebc20",
+ "PLL_333",
+ "PLL_400@1",
+ "PLL_400@2",
+ "PLL_533",
+ "PLL_600",
+ "PLL_666",
+ "RCONF",
+ "WTEST",
+ ""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+ /* 0: CPU 333MHz EBC 20MHz, for test only */
+ {
+ 0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 0: 333 */
+ {
+ 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 1: 400_266 */
+ {
+ 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 2: 400 */
+ {
+ 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 3: 533 */
+ {
+ 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 4: 600 */
+ {
+ 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ /* 5: 666 */
+ {
+ 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ },
+
+ {}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+ 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+ 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+ int i;
+ uchar buffer[EEPROM_SDSTP_PARAM];
+
+ memset(buffer, 0, sizeof(buffer));
+ eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
+ buffer, EEPROM_SDSTP_PARAM);
+
+ printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+ for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+ printf("%02x ", buffer[i]);
+ printf("\n");
+}
+
+static void
+test_write(void)
+{
+ printf("Debug: test eeprom_write ... ");
+
+ /*
+ * Write twice, 8 bytes per write
+ */
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+ testbuf, 8);
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+ testbuf, 16);
+ printf("done\n");
+
+ pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char c = '\0';
+ pll_freq_t pll_freq;
+
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
+ for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) {
+ if (!strcmp(pll_name[pll_freq], argv[1]))
+ break;
+ }
+
+ switch (pll_freq) {
+ case PLL_ebc20:
+ case PLL_333:
+ case PLL_4001:
+ case PLL_4002:
+ case PLL_533:
+ case PLL_600:
+ EEPROM_ALTER_FREQ(pll_freq);
+ break;
+
+ case PLL_666: /* not support */
+ printf("Choose this option will result in a boot failure."
+ "\nContinue? (Y/N): ");
+
+ c = getc(); putc('\n');
+
+ if ((c == 'y') || (c == 'Y')) {
+ EEPROM_ALTER_FREQ(pll_freq);
+ break;
+ }
+ goto ret;
+
+ case RCONF:
+ pll_debug(EEPROM_CONF_OFFSET);
+ goto ret;
+ case WTEST:
+ printf("DEBUG: write test\n");
+ test_write();
+ goto ret;
+
+ default:
+ printf("Invalid options\n\n");
+ return cmd_usage(cmdtp);
+ }
+
+ printf("PLL set to %s, "
+ "reset the board to take effect\n", pll_name[pll_freq]);
+
+ PLL_DEBUG;
+ret:
+ return 0;
+}
+
+U_BOOT_CMD(
+ pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
+ "change pll frequence",
+ "pllalter <selection> - change pll frequence \n\n\
+ ** New freq take effect after reset. ** \n\
+ ----------------------------------------------\n\
+ PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t Same as PLL_333 \n\
+ \t except \n\
+ \t EBC: 20 MHz \n\
+ ----------------------------------------------\n\
+ PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 666 MHz \n\
+ \t CPU: 333 MHz \n\
+ \t PLB: 166 MHz \n\
+ \t OPB: 83 MHz \n\
+ \t DDR: 83 MHz \n\
+ ------------------------------------------------\n\
+ PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 800 MHz \n\
+ \t CPU: 400 MHz \n\
+ \t PLB: 133 MHz \n\
+ \t OPB: 66 MHz \n\
+ \t DDR: 133 MHz \n\
+ ------------------------------------------------\n\
+ PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 800 MHz \n\
+ \t CPU: 400 MHz \n\
+ \t PLB: 200 MHz \n\
+ \t OPB: 100 MHz \n\
+ \t DDR: 200 MHz \n\
+ ----------------------------------------------\n\
+ PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 1066 MHz \n\
+ \t CPU: 533 MHz \n\
+ \t PLB: 177 MHz \n\
+ \t OPB: 88 MHz \n\
+ \t DDR: 177 MHz \n\
+ ----------------------------------------------\n\
+ PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 1200 MHz \n\
+ \t CPU: 600 MHz \n\
+ \t PLB: 200 MHz \n\
+ \t OPB: 100 MHz \n\
+ \t DDR: 200 MHz \n\
+ ----------------------------------------------\n\
+ PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+ \t VCO: 1333 MHz \n\
+ \t CPU: 666 MHz \n\
+ \t PLB: 166 MHz \n\
+ \t OPB: 83 MHz \n\
+ \t DDR: 166 MHz \n\
+ -----------------------------------------------\n\
+ RCONF: Read current eeprom configuration. \n\
+ -----------------------------------------------\n\
+ WTEST: Test EEPROM write with predefined values\n\
+ -----------------------------------------------"
+);
+
+#endif /* CONFIG_CMD_EEPROM */
diff --git a/qemu/roms/u-boot/board/amcc/makalu/init.S b/qemu/roms/u-boot/board/amcc/makalu/init.S
new file mode 100644
index 000000000..e15c62249
--- /dev/null
+++ b/qemu/roms/u-boot/board/amcc/makalu/init.S
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Originally based on code provided from Senao and AMCC
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ blr
diff --git a/qemu/roms/u-boot/board/amcc/makalu/makalu.c b/qemu/roms/u-boot/board/amcc/makalu/makalu.c
new file mode 100644
index 000000000..a6ad2a1ba
--- /dev/null
+++ b/qemu/roms/u-boot/board/amcc/makalu/makalu.c
@@ -0,0 +1,223 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc4xx.h>
+#include <asm/ppc405.h>
+#include <libfdt.h>
+#include <asm/processor.h>
+#include <asm/ppc4xx-gpio.h>
+#include <asm/io.h>
+#include <fdt_support.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+ u32 val;
+
+ /*--------------------------------------------------------------------+
+ | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+ +--------------------------------------------------------------------+
+ +---------------------------------------------------------------------+
+ |Interrupt| Source | Pol. | Sensi.| Crit. |
+ +---------+-----------------------------------+-------+-------+-------+
+ | IRQ 00 | UART0 | High | Level | Non |
+ | IRQ 01 | UART1 | High | Level | Non |
+ | IRQ 02 | IIC0 | High | Level | Non |
+ | IRQ 03 | TBD | High | Level | Non |
+ | IRQ 04 | TBD | High | Level | Non |
+ | IRQ 05 | EBM | High | Level | Non |
+ | IRQ 06 | BGI | High | Level | Non |
+ | IRQ 07 | IIC1 | Rising| Edge | Non |
+ | IRQ 08 | SPI | High | Lvl/ed| Non |
+ | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non |
+ | IRQ 10 | MAL TX EOB | High | Level | Non |
+ | IRQ 11 | MAL RX EOB | High | Level | Non |
+ | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non |
+ | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non |
+ | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non |
+ | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non |
+ | IRQ 16 | PCIE0 AL | high | Level | Non |
+ | IRQ 17 | PCIE0 VPD access | rising| Edge | Non |
+ | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non |
+ | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non |
+ | IRQ 20 | PCIE0 TCR | High | Level | Non |
+ | IRQ 21 | PCIE0 MSI level0 | High | Level | Non |
+ | IRQ 22 | PCIE0 MSI level1 | High | Level | Non |
+ | IRQ 23 | Security EIP-94 | High | Level | Non |
+ | IRQ 24 | EMAC0 interrupt | High | Level | Non |
+ | IRQ 25 | EMAC1 interrupt | High | Level | Non |
+ | IRQ 26 | PCIE0 MSI level2 | High | Level | Non |
+ | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non |
+ | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non |
+ | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. |
+ | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non |
+ | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. |
+ |----------------------------------------------------------------------
+ | IRQ 32 | MAL Serr | High | Level | Non |
+ | IRQ 33 | MAL Txde | High | Level | Non |
+ | IRQ 34 | MAL Rxde | High | Level | Non |
+ | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non |
+ | IRQ 36 | PCIE0 DCR Error | High | Level | Non |
+ | IRQ 37 | EBC | High |Lvl Edg| Non |
+ | IRQ 38 | NDFC | High | Level | Non |
+ | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non |
+ | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non |
+ | IRQ 41 | PCIE1 AL | high | Level | Non |
+ | IRQ 42 | PCIE1 VPD access | rising| edge | Non |
+ | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non |
+ | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non |
+ | IRQ 45 | PCIE1 TCR | High | Level | Non |
+ | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non |
+ | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
+ | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
+ | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non |
+ | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
+ | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non |
+ | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non |
+ | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non |
+ | IRQ 55 | Serial ROM | High | Level | Non |
+ | IRQ 56 | GPT Decrement Pulse | High | Level | Non |
+ | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 60 | EMAC0 Wake-up | High | Level | Non |
+ | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non |
+ | IRQ 62 | EMAC1 Wake-up | High | Level | Non |
+ |----------------------------------------------------------------------
+ | IRQ 64 | PE0 AL | High | Level | Non |
+ | IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
+ | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 68 | PE0 TCR | High | Level | Non |
+ | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 70 | PE0 DCR Error | High | Level | Non |
+ | IRQ 71 | Reserved | N/A | N/A | Non |
+ | IRQ 72 | PE1 AL | High | Level | Non |
+ | IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
+ | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 76 | PE1 TCR | High | Level | Non |
+ | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 78 | PE1 DCR Error | High | Level | Non |
+ | IRQ 79 | Reserved | N/A | N/A | Non |
+ | IRQ 80 | PE2 AL | High | Level | Non |
+ | IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
+ | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
+ | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
+ | IRQ 84 | PE2 TCR | High | Level | Non |
+ | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
+ | IRQ 86 | PE2 DCR Error | High | Level | Non |
+ | IRQ 87 | Reserved | N/A | N/A | Non |
+ | IRQ 88 | External IRQ(5) | Progr | Progr | Non |
+ | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
+ | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
+ | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
+ | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
+ | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
+ | IRQ 94 | Reserved | N/A | N/A | Non |
+ | IRQ 95 | Reserved | N/A | N/A | Non |
+ |---------------------------------------------------------------------
+ +---------+-----------------------------------+-------+-------+------*/
+ /*--------------------------------------------------------------------+
+ | Initialise UIC registers. Clear all interrupts. Disable all
+ | interrupts.
+ | Set critical interrupt values. Set interrupt polarities. Set
+ | interrupt trigger levels. Make bit 0 High priority. Clear all
+ | interrupts again.
+ +-------------------------------------------------------------------*/
+
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */
+ /* Except cascade UIC0 and UIC1 */
+ mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
+
+ /*
+ * Note: Some cores are still in reset when the chip starts, so
+ * take them out of reset
+ */
+ mtsdr(SDR0_SRST, 0);
+
+ /* Reset PCIe slots */
+ gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 0);
+ udelay(100);
+ gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 1);
+
+ /*
+ * Configure PFC (Pin Function Control) registers
+ * -> Enable USB
+ */
+ val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+ mtsdr(SDR0_PFC1, val);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_ENV_IS_IN_FLASH
+ /* Monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ -CONFIG_SYS_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+#endif
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char buf[64];
+ int i = getenv_f("serial#", buf, sizeof(buf));
+
+ printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
+
+ if (i > 0) {
+ puts(", serial# ");
+ puts(buf);
+ }
+ putc('\n');
+
+ return (0);
+}