1 files changed, 0 insertions, 119 deletions
diff --git a/qemu/roms/u-boot/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/qemu/roms/u-boot/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
deleted file mode 100644
index e1652c083..000000000
--- a/qemu/roms/u-boot/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Maintainer : Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/arch/mpp.h>
-#include "mv88f6281gtw_ge.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/*
-	 * default gpio configuration
-	 * There are maximum 64 gpios controlled through 2 sets of registers
-	 * the  below configuration configures mainly initial LED status
-	 */
-	kw_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
-			MV88F6281GTW_GE_OE_VAL_HIGH,
-			MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
-
-	/* Multi-Purpose Pins Functionality configuration */
-	static const u32 kwmpp_config[] = {
-		MPP0_SPI_SCn,
-		MPP1_SPI_MOSI,
-		MPP2_SPI_SCK,
-		MPP3_SPI_MISO,
-		MPP4_GPIO,
-		MPP5_GPO,
-		MPP6_SYSRST_OUTn,
-		MPP7_SPI_SCn,
-		MPP8_TW_SDA,
-		MPP9_TW_SCK,
-		MPP10_UART0_TXD,
-		MPP11_UART0_RXD,
-		MPP12_GPO,
-		MPP13_GPIO,
-		MPP14_GPIO,
-		MPP15_GPIO,
-		MPP16_GPIO,
-		MPP17_GPIO,
-		MPP18_GPO,
-		MPP19_GPO,
-		MPP20_GPIO,
-		MPP21_GPIO,
-		MPP22_GPIO,
-		MPP23_GPIO,
-		MPP24_GPIO,
-		MPP25_GPIO,
-		MPP26_GPIO,
-		MPP27_GPIO,
-		MPP28_GPIO,
-		MPP29_GPIO,
-		MPP30_GPIO,
-		MPP31_GPIO,
-		MPP32_GPIO,
-		MPP33_GPIO,
-		MPP34_GPIO,
-		MPP35_GPIO,
-		MPP36_GPIO,
-		MPP37_GPIO,
-		MPP38_GPIO,
-		MPP39_GPIO,
-		MPP40_GPIO,
-		MPP41_GPIO,
-		MPP42_GPIO,
-		MPP43_GPIO,
-		MPP44_GPIO,
-		MPP45_GPIO,
-		MPP46_GPIO,
-		MPP47_GPIO,
-		MPP48_GPIO,
-		MPP49_GPIO,
-		0
-	};
-	kirkwood_mpp_conf(kwmpp_config, NULL);
-	return 0;
-}
-
-int board_init(void)
-{
-	/*
-	 * arch number of board
-	 */
-	gd->bd->bi_arch_number = MACH_TYPE_MV88F6281GTW_GE;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_MV88E61XX_SWITCH
-void reset_phy(void)
-{
-	/* configure and initialize switch */
-	struct mv88e61xx_config swcfg = {
-		.name = "egiga0",
-		.vlancfg = MV88E61XX_VLANCFG_ROUTER,
-		.rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
-		.led_init = MV88E61XX_LED_INIT_EN,
-		.mdip = MV88E61XX_MDIP_REVERSE,
-		.portstate = MV88E61XX_PORTSTT_FORWARDING,
-		.cpuport = (1 << 5),
-		.ports_enabled = 0x3f
-	};
-
-	mv88e61xx_switch_initialize(&swcfg);
-}
-#endif /* CONFIG_MV88E61XX_SWITCH */