diff options
Diffstat (limited to 'qemu/roms/u-boot/board/Marvell/common/intel_flash.h')
| -rw-r--r-- | qemu/roms/u-boot/board/Marvell/common/intel_flash.h | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/Marvell/common/intel_flash.h b/qemu/roms/u-boot/board/Marvell/common/intel_flash.h new file mode 100644 index 000000000..5531f95ca --- /dev/null +++ b/qemu/roms/u-boot/board/Marvell/common/intel_flash.h @@ -0,0 +1,170 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Hacked for the marvell db64360 eval board by + * Ingo Assmus <ingo.assmus@keymile.com> + */ + +/*************** DEFINES for Intel StrataFlash FLASH chip ********************/ + +/* + * acceptable chips types are: + * + * 28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A + */ + +/* register addresses, valid only following an CHIP_CMD_RD_ID command */ +#define CHIP_ADDR_REG_MAN 0x000000 /* manufacturer's id */ +#define CHIP_ADDR_REG_DEV 0x000001 /* device id */ +#define CHIP_ADDR_REG_CFGM 0x000003 /* master lock config */ +#define CHIP_ADDR_REG_CFG(b) (((b)<<16)|2) /* lock config for block b */ + +/* Commands */ +#define CHIP_CMD_RST 0xFF /* reset flash */ +#define CHIP_CMD_RD_ID 0x90 /* read the id and lock bits */ +#define CHIP_CMD_RD_QUERY 0x98 /* read device capabilities */ +#define CHIP_CMD_RD_STAT 0x70 /* read the status register */ +#define CHIP_CMD_CLR_STAT 0x50 /* clear the staus register */ +#define CHIP_CMD_WR_BUF 0xE8 /* clear the staus register */ +#define CHIP_CMD_PROG 0x40 /* program word command */ +#define CHIP_CMD_ERASE1 0x20 /* 1st word for block erase */ +#define CHIP_CMD_ERASE2 0xD0 /* 2nd word for block erase */ +#define CHIP_CMD_ERASE_SUSP 0xB0 /* suspend block erase */ +#define CHIP_CMD_LOCK 0x60 /* 1st word for all lock cmds */ +#define CHIP_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */ +#define CHIP_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */ +#define CHIP_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */ + +/* status register bits */ +#define CHIP_STAT_DPS 0x02 /* Device Protect Status */ +#define CHIP_STAT_VPPS 0x08 /* VPP Status */ +#define CHIP_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */ +#define CHIP_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */ +#define CHIP_STAT_ESS 0x40 /* Erase Suspend Status */ +#define CHIP_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */ + +#define CHIP_STAT_ERR (CHIP_STAT_VPPS | CHIP_STAT_DPS | \ + CHIP_STAT_ECLBS | CHIP_STAT_PSLBS) + +/* ID and Lock Configuration */ +#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */ +#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */ +#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID + +/* dimensions */ +#define CHIP_WIDTH 2 /* chips are in 16 bit mode */ +#define CHIP_WSHIFT 1 /* (log2 of CHIP_WIDTH) */ +#define CHIP_NBLOCKS 128 +#define CHIP_BLKSZ (128 * 1024) /* of 128Kbytes each */ +#define CHIP_SIZE (CHIP_BLKSZ * CHIP_NBLOCKS) + +/********************** DEFINES for Hymod Flash ******************************/ + +/* + * The hymod board has 2 x 28F320J5 chips running in + * 16 bit mode, for a 32 bit wide bank. + */ + +typedef unsigned short bank_word_t; /* 8/16/32/64bit unsigned int */ +typedef volatile bank_word_t *bank_addr_t; +typedef unsigned long bank_size_t; /* want this big - >= 32 bit */ + +#define BANK_CHIP_WIDTH 1 /* each bank is 1 chip wide */ +#define BANK_CHIP_WSHIFT 0 /* (log2 of BANK_CHIP_WIDTH) */ + +#define BANK_WIDTH (CHIP_WIDTH * BANK_CHIP_WIDTH) +#define BANK_WSHIFT (CHIP_WSHIFT + BANK_CHIP_WSHIFT) +#define BANK_NBLOCKS CHIP_NBLOCKS +#define BANK_BLKSZ (CHIP_BLKSZ * BANK_CHIP_WIDTH) +#define BANK_SIZE (CHIP_SIZE * BANK_CHIP_WIDTH) + +#define MAX_BANKS 1 /* only one bank possible */ + +/* align bank addresses and sizes to bank word boundaries */ +#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ + & ~(BANK_WIDTH - 1))) +#define BANK_SIZE_WORD_ALIGN(s) ((bank_size_t)BANK_ADDR_WORD_ALIGN( \ + (bank_size_t)(s) + (BANK_WIDTH - 1))) + +/* align bank addresses and sizes to bank block boundaries */ +#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ + & ~(BANK_BLKSZ - 1))) +#define BANK_SIZE_BLK_ALIGN(s) ((bank_size_t)BANK_ADDR_BLK_ALIGN( \ + (bank_size_t)(s) + (BANK_BLKSZ - 1))) + +/* align bank addresses and sizes to bank boundaries */ +#define BANK_ADDR_BANK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ + & ~(BANK_SIZE - 1))) +#define BANK_SIZE_BANK_ALIGN(s) ((bank_size_t)BANK_ADDR_BANK_ALIGN( \ + (bank_size_t)(s) + (BANK_SIZE - 1))) + +/* add an offset to a bank address */ +#define BANK_ADDR_OFFSET(a, o) (bank_addr_t)((bank_size_t)(a) + \ + (bank_size_t)(o)) + +/* get base address of bank b, given flash base address a */ +#define BANK_ADDR_BASE(a, b) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \ + (bank_size_t)(b) * BANK_SIZE) + +/* adjust a bank address to start of next word, block or bank */ +#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \ + BANK_WIDTH) +#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \ + BANK_BLKSZ) +#define BANK_ADDR_NEXT_BANK(a) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \ + BANK_SIZE) + +/* get bank address of chip register r given a bank base address a */ +#define BANK_ADDR_REG(a, r) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \ + ((bank_size_t)(r) << BANK_WSHIFT)) + +/* make a bank address for each chip register address */ + +#define BANK_ADDR_REG_MAN(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN) +#define BANK_ADDR_REG_DEV(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV) +#define BANK_ADDR_REG_CFGM(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM) +#define BANK_ADDR_REG_CFG(b,a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b)) + +/* + * replicate a chip cmd/stat/rd value into each byte position within a word + * so that multiple chips are accessed in a single word i/o operation + * + * this must be as wide as the bank_word_t type, and take into account the + * chip width and bank layout + */ + +#define BANK_FILL_WORD(o) ((bank_word_t)(o)) + +/* make a bank word value for each chip cmd/stat/rd value */ + +/* Commands */ +#define BANK_CMD_RST BANK_FILL_WORD(CHIP_CMD_RST) +#define BANK_CMD_RD_ID BANK_FILL_WORD(CHIP_CMD_RD_ID) +#define BANK_CMD_RD_STAT BANK_FILL_WORD(CHIP_CMD_RD_STAT) +#define BANK_CMD_CLR_STAT BANK_FILL_WORD(CHIP_CMD_CLR_STAT) +#define BANK_CMD_ERASE1 BANK_FILL_WORD(CHIP_CMD_ERASE1) +#define BANK_CMD_ERASE2 BANK_FILL_WORD(CHIP_CMD_ERASE2) +#define BANK_CMD_PROG BANK_FILL_WORD(CHIP_CMD_PROG) +#define BANK_CMD_LOCK BANK_FILL_WORD(CHIP_CMD_LOCK) +#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK) +#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR) +#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK) + +/* status register bits */ +#define BANK_STAT_DPS BANK_FILL_WORD(CHIP_STAT_DPS) +#define BANK_STAT_PSS BANK_FILL_WORD(CHIP_STAT_PSS) +#define BANK_STAT_VPPS BANK_FILL_WORD(CHIP_STAT_VPPS) +#define BANK_STAT_PSLBS BANK_FILL_WORD(CHIP_STAT_PSLBS) +#define BANK_STAT_ECLBS BANK_FILL_WORD(CHIP_STAT_ECLBS) +#define BANK_STAT_ESS BANK_FILL_WORD(CHIP_STAT_ESS) +#define BANK_STAT_RDY BANK_FILL_WORD(CHIP_STAT_RDY) + +#define BANK_STAT_ERR BANK_FILL_WORD(CHIP_STAT_ERR) + +/* ID and Lock Configuration */ +#define BANK_RD_ID_LOCK BANK_FILL_WORD(CHIP_RD_ID_LOCK) +#define BANK_RD_ID_MAN BANK_FILL_WORD(CHIP_RD_ID_MAN) +#define BANK_RD_ID_DEV BANK_FILL_WORD(CHIP_RD_ID_DEV) |