1 files changed, 0 insertions, 134 deletions

diff --git a/qemu/roms/u-boot/arch/arm/cpu/armv7/omap-common/boot-common.c b/qemu/roms/u-boot/arch/arm/cpu/armv7/omap-common/boot-common.c
deleted file mode 100644
index 303356476..000000000
--- a/qemu/roms/u-boot/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * boot-common.c
- *
- * Common bootmode functions for omap based boards
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <asm/omap_common.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void save_omap_boot_params(void)
-{
-	u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
-	u8 boot_device;
-	u32 dev_desc, dev_data;
-
-	if ((rom_params <  NON_SECURE_SRAM_START) ||
-	    (rom_params > NON_SECURE_SRAM_END))
-		return;
-
-	/*
-	 * rom_params can be type casted to omap_boot_parameters and
-	 * used. But it not correct to assume that romcode structure
-	 * encoding would be same as u-boot. So use the defined offsets.
-	 */
-	gd->arch.omap_boot_params.omap_bootdevice = boot_device =
-				   *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
-
-	gd->arch.omap_boot_params.ch_flags =
-				*((u8 *)(rom_params + CH_FLAGS_OFFSET));
-
-	if ((boot_device >= MMC_BOOT_DEVICES_START) &&
-	    (boot_device <= MMC_BOOT_DEVICES_END)) {
-#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \
-	!defined(CONFIG_AM43XX)
-		if ((omap_hw_init_context() ==
-				      OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
-			gd->arch.omap_boot_params.omap_bootmode =
-			*((u8 *)(rom_params + BOOT_MODE_OFFSET));
-		} else
-#endif
-		{
-			dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
-			dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
-			gd->arch.omap_boot_params.omap_bootmode =
-					*((u32 *)(dev_data + BOOT_MODE_OFFSET));
-		}
-	}
-
-#ifdef CONFIG_DRA7XX
-	/*
-	 * We get different values for QSPI_1 and QSPI_4 being used, but
-	 * don't actually care about this difference.  Rather than
-	 * mangle the later code, if we're coming in as QSPI_4 just
-	 * change to the QSPI_1 value.
-	 */
-	if (gd->arch.omap_boot_params.omap_bootdevice == 11)
-		gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI;
-#endif
-}
-
-#ifdef CONFIG_SPL_BUILD
-u32 spl_boot_device(void)
-{
-	return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
-}
-
-u32 spl_boot_mode(void)
-{
-	u32 val = gd->arch.omap_boot_params.omap_bootmode;
-
-	if (val == MMCSD_MODE_RAW)
-		return MMCSD_MODE_RAW;
-	else if (val == MMCSD_MODE_FAT)
-		return MMCSD_MODE_FAT;
-	else
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-		return MMCSD_MODE_EMMCBOOT;
-#else
-		return MMCSD_MODE_UNDEFINED;
-#endif
-}
-
-void spl_board_init(void)
-{
-#ifdef CONFIG_SPL_NAND_SUPPORT
-	gpmc_init();
-#endif
-#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
-	arch_misc_init();
-#endif
-#if defined(CONFIG_HW_WATCHDOG)
-	hw_watchdog_init();
-#endif
-#ifdef CONFIG_AM33XX
-	am33xx_spl_board_init();
-#endif
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	switch (spl_boot_device()) {
-	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0, -1, -1);
-		break;
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0, -1, -1);
-		break;
-	}
-	return 0;
-}
-
-void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
-{
-	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
-	image_entry_noargs_t image_entry =
-			(image_entry_noargs_t) spl_image->entry_point;
-
-	debug("image entry point: 0x%X\n", spl_image->entry_point);
-	/* Pass the saved boot_params from rom code */
-	image_entry((u32 *)&gd->arch.omap_boot_params);
-}
-#endif