summaryrefslogtreecommitdiffstats
path: root/qemu/hw/usb/dev-serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/hw/usb/dev-serial.c')
-rw-r--r--qemu/hw/usb/dev-serial.c649
1 files changed, 649 insertions, 0 deletions
diff --git a/qemu/hw/usb/dev-serial.c b/qemu/hw/usb/dev-serial.c
new file mode 100644
index 000000000..a6a66008e
--- /dev/null
+++ b/qemu/hw/usb/dev-serial.c
@@ -0,0 +1,649 @@
+/*
+ * FTDI FT232BM Device emulation
+ *
+ * Copyright (c) 2006 CodeSourcery.
+ * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org>
+ * Written by Paul Brook, reused for FTDI by Samuel Thibault
+ *
+ * This code is licensed under the LGPL.
+ */
+
+#include "qemu-common.h"
+#include "qemu/error-report.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+#include "sysemu/char.h"
+
+//#define DEBUG_Serial
+
+#ifdef DEBUG_Serial
+#define DPRINTF(fmt, ...) \
+do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#endif
+
+#define RECV_BUF 384
+
+/* Commands */
+#define FTDI_RESET 0
+#define FTDI_SET_MDM_CTRL 1
+#define FTDI_SET_FLOW_CTRL 2
+#define FTDI_SET_BAUD 3
+#define FTDI_SET_DATA 4
+#define FTDI_GET_MDM_ST 5
+#define FTDI_SET_EVENT_CHR 6
+#define FTDI_SET_ERROR_CHR 7
+#define FTDI_SET_LATENCY 9
+#define FTDI_GET_LATENCY 10
+
+#define DeviceOutVendor ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
+#define DeviceInVendor ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
+
+/* RESET */
+
+#define FTDI_RESET_SIO 0
+#define FTDI_RESET_RX 1
+#define FTDI_RESET_TX 2
+
+/* SET_MDM_CTRL */
+
+#define FTDI_DTR 1
+#define FTDI_SET_DTR (FTDI_DTR << 8)
+#define FTDI_RTS 2
+#define FTDI_SET_RTS (FTDI_RTS << 8)
+
+/* SET_FLOW_CTRL */
+
+#define FTDI_RTS_CTS_HS 1
+#define FTDI_DTR_DSR_HS 2
+#define FTDI_XON_XOFF_HS 4
+
+/* SET_DATA */
+
+#define FTDI_PARITY (0x7 << 8)
+#define FTDI_ODD (0x1 << 8)
+#define FTDI_EVEN (0x2 << 8)
+#define FTDI_MARK (0x3 << 8)
+#define FTDI_SPACE (0x4 << 8)
+
+#define FTDI_STOP (0x3 << 11)
+#define FTDI_STOP1 (0x0 << 11)
+#define FTDI_STOP15 (0x1 << 11)
+#define FTDI_STOP2 (0x2 << 11)
+
+/* GET_MDM_ST */
+/* TODO: should be sent every 40ms */
+#define FTDI_CTS (1<<4) // CTS line status
+#define FTDI_DSR (1<<5) // DSR line status
+#define FTDI_RI (1<<6) // RI line status
+#define FTDI_RLSD (1<<7) // Receive Line Signal Detect
+
+/* Status */
+
+#define FTDI_DR (1<<0) // Data Ready
+#define FTDI_OE (1<<1) // Overrun Err
+#define FTDI_PE (1<<2) // Parity Err
+#define FTDI_FE (1<<3) // Framing Err
+#define FTDI_BI (1<<4) // Break Interrupt
+#define FTDI_THRE (1<<5) // Transmitter Holding Register
+#define FTDI_TEMT (1<<6) // Transmitter Empty
+#define FTDI_FIFO (1<<7) // Error in FIFO
+
+typedef struct {
+ USBDevice dev;
+ uint8_t recv_buf[RECV_BUF];
+ uint16_t recv_ptr;
+ uint16_t recv_used;
+ uint8_t event_chr;
+ uint8_t error_chr;
+ uint8_t event_trigger;
+ QEMUSerialSetParams params;
+ int latency; /* ms */
+ CharDriverState *cs;
+} USBSerialState;
+
+#define TYPE_USB_SERIAL "usb-serial-dev"
+#define USB_SERIAL_DEV(obj) OBJECT_CHECK(USBSerialState, (obj), TYPE_USB_SERIAL)
+
+enum {
+ STR_MANUFACTURER = 1,
+ STR_PRODUCT_SERIAL,
+ STR_PRODUCT_BRAILLE,
+ STR_SERIALNUMBER,
+};
+
+static const USBDescStrings desc_strings = {
+ [STR_MANUFACTURER] = "QEMU",
+ [STR_PRODUCT_SERIAL] = "QEMU USB SERIAL",
+ [STR_PRODUCT_BRAILLE] = "QEMU USB BAUM BRAILLE",
+ [STR_SERIALNUMBER] = "1",
+};
+
+static const USBDescIface desc_iface0 = {
+ .bInterfaceNumber = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ .eps = (USBDescEndpoint[]) {
+ {
+ .bEndpointAddress = USB_DIR_IN | 0x01,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = 64,
+ },{
+ .bEndpointAddress = USB_DIR_OUT | 0x02,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = 64,
+ },
+ }
+};
+
+static const USBDescDevice desc_device = {
+ .bcdUSB = 0x0200,
+ .bMaxPacketSize0 = 8,
+ .bNumConfigurations = 1,
+ .confs = (USBDescConfig[]) {
+ {
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .bmAttributes = USB_CFG_ATT_ONE,
+ .bMaxPower = 50,
+ .nif = 1,
+ .ifs = &desc_iface0,
+ },
+ },
+};
+
+static const USBDesc desc_serial = {
+ .id = {
+ .idVendor = 0x0403,
+ .idProduct = 0x6001,
+ .bcdDevice = 0x0400,
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT_SERIAL,
+ .iSerialNumber = STR_SERIALNUMBER,
+ },
+ .full = &desc_device,
+ .str = desc_strings,
+};
+
+static const USBDesc desc_braille = {
+ .id = {
+ .idVendor = 0x0403,
+ .idProduct = 0xfe72,
+ .bcdDevice = 0x0400,
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT_BRAILLE,
+ .iSerialNumber = STR_SERIALNUMBER,
+ },
+ .full = &desc_device,
+ .str = desc_strings,
+};
+
+static void usb_serial_reset(USBSerialState *s)
+{
+ /* TODO: Set flow control to none */
+ s->event_chr = 0x0d;
+ s->event_trigger = 0;
+ s->recv_ptr = 0;
+ s->recv_used = 0;
+ /* TODO: purge in char driver */
+}
+
+static void usb_serial_handle_reset(USBDevice *dev)
+{
+ USBSerialState *s = (USBSerialState *)dev;
+
+ DPRINTF("Reset\n");
+
+ usb_serial_reset(s);
+ /* TODO: Reset char device, send BREAK? */
+}
+
+static uint8_t usb_get_modem_lines(USBSerialState *s)
+{
+ int flags;
+ uint8_t ret;
+
+ if (qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP)
+ return FTDI_CTS|FTDI_DSR|FTDI_RLSD;
+
+ ret = 0;
+ if (flags & CHR_TIOCM_CTS)
+ ret |= FTDI_CTS;
+ if (flags & CHR_TIOCM_DSR)
+ ret |= FTDI_DSR;
+ if (flags & CHR_TIOCM_RI)
+ ret |= FTDI_RI;
+ if (flags & CHR_TIOCM_CAR)
+ ret |= FTDI_RLSD;
+
+ return ret;
+}
+
+static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
+{
+ USBSerialState *s = (USBSerialState *)dev;
+ int ret;
+
+ DPRINTF("got control %x, value %x\n",request, value);
+ ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
+ if (ret >= 0) {
+ return;
+ }
+
+ switch (request) {
+ case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+ break;
+
+ /* Class specific requests. */
+ case DeviceOutVendor | FTDI_RESET:
+ switch (value) {
+ case FTDI_RESET_SIO:
+ usb_serial_reset(s);
+ break;
+ case FTDI_RESET_RX:
+ s->recv_ptr = 0;
+ s->recv_used = 0;
+ /* TODO: purge from char device */
+ break;
+ case FTDI_RESET_TX:
+ /* TODO: purge from char device */
+ break;
+ }
+ break;
+ case DeviceOutVendor | FTDI_SET_MDM_CTRL:
+ {
+ static int flags;
+ qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
+ if (value & FTDI_SET_RTS) {
+ if (value & FTDI_RTS)
+ flags |= CHR_TIOCM_RTS;
+ else
+ flags &= ~CHR_TIOCM_RTS;
+ }
+ if (value & FTDI_SET_DTR) {
+ if (value & FTDI_DTR)
+ flags |= CHR_TIOCM_DTR;
+ else
+ flags &= ~CHR_TIOCM_DTR;
+ }
+ qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
+ break;
+ }
+ case DeviceOutVendor | FTDI_SET_FLOW_CTRL:
+ /* TODO: ioctl */
+ break;
+ case DeviceOutVendor | FTDI_SET_BAUD: {
+ static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 };
+ int subdivisor8 = subdivisors8[((value & 0xc000) >> 14)
+ | ((index & 1) << 2)];
+ int divisor = value & 0x3fff;
+
+ /* chip special cases */
+ if (divisor == 1 && subdivisor8 == 0)
+ subdivisor8 = 4;
+ if (divisor == 0 && subdivisor8 == 0)
+ divisor = 1;
+
+ s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);
+ qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
+ break;
+ }
+ case DeviceOutVendor | FTDI_SET_DATA:
+ switch (value & FTDI_PARITY) {
+ case 0:
+ s->params.parity = 'N';
+ break;
+ case FTDI_ODD:
+ s->params.parity = 'O';
+ break;
+ case FTDI_EVEN:
+ s->params.parity = 'E';
+ break;
+ default:
+ DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
+ goto fail;
+ }
+ switch (value & FTDI_STOP) {
+ case FTDI_STOP1:
+ s->params.stop_bits = 1;
+ break;
+ case FTDI_STOP2:
+ s->params.stop_bits = 2;
+ break;
+ default:
+ DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
+ goto fail;
+ }
+ qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
+ /* TODO: TX ON/OFF */
+ break;
+ case DeviceInVendor | FTDI_GET_MDM_ST:
+ data[0] = usb_get_modem_lines(s) | 1;
+ data[1] = 0;
+ p->actual_length = 2;
+ break;
+ case DeviceOutVendor | FTDI_SET_EVENT_CHR:
+ /* TODO: handle it */
+ s->event_chr = value;
+ break;
+ case DeviceOutVendor | FTDI_SET_ERROR_CHR:
+ /* TODO: handle it */
+ s->error_chr = value;
+ break;
+ case DeviceOutVendor | FTDI_SET_LATENCY:
+ s->latency = value;
+ break;
+ case DeviceInVendor | FTDI_GET_LATENCY:
+ data[0] = s->latency;
+ p->actual_length = 1;
+ break;
+ default:
+ fail:
+ DPRINTF("got unsupported/bogus control %x, value %x\n", request, value);
+ p->status = USB_RET_STALL;
+ break;
+ }
+}
+
+static void usb_serial_handle_data(USBDevice *dev, USBPacket *p)
+{
+ USBSerialState *s = (USBSerialState *)dev;
+ uint8_t devep = p->ep->nr;
+ struct iovec *iov;
+ uint8_t header[2];
+ int i, first_len, len;
+
+ switch (p->pid) {
+ case USB_TOKEN_OUT:
+ if (devep != 2)
+ goto fail;
+ for (i = 0; i < p->iov.niov; i++) {
+ iov = p->iov.iov + i;
+ qemu_chr_fe_write(s->cs, iov->iov_base, iov->iov_len);
+ }
+ p->actual_length = p->iov.size;
+ break;
+
+ case USB_TOKEN_IN:
+ if (devep != 1)
+ goto fail;
+ first_len = RECV_BUF - s->recv_ptr;
+ len = p->iov.size;
+ if (len <= 2) {
+ p->status = USB_RET_NAK;
+ break;
+ }
+ header[0] = usb_get_modem_lines(s) | 1;
+ /* We do not have the uart details */
+ /* handle serial break */
+ if (s->event_trigger && s->event_trigger & FTDI_BI) {
+ s->event_trigger &= ~FTDI_BI;
+ header[1] = FTDI_BI;
+ usb_packet_copy(p, header, 2);
+ break;
+ } else {
+ header[1] = 0;
+ }
+ len -= 2;
+ if (len > s->recv_used)
+ len = s->recv_used;
+ if (!len) {
+ p->status = USB_RET_NAK;
+ break;
+ }
+ if (first_len > len)
+ first_len = len;
+ usb_packet_copy(p, header, 2);
+ usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);
+ if (len > first_len)
+ usb_packet_copy(p, s->recv_buf, len - first_len);
+ s->recv_used -= len;
+ s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;
+ break;
+
+ default:
+ DPRINTF("Bad token\n");
+ fail:
+ p->status = USB_RET_STALL;
+ break;
+ }
+}
+
+static int usb_serial_can_read(void *opaque)
+{
+ USBSerialState *s = opaque;
+
+ if (!s->dev.attached) {
+ return 0;
+ }
+ return RECV_BUF - s->recv_used;
+}
+
+static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
+{
+ USBSerialState *s = opaque;
+ int first_size, start;
+
+ /* room in the buffer? */
+ if (size > (RECV_BUF - s->recv_used))
+ size = RECV_BUF - s->recv_used;
+
+ start = s->recv_ptr + s->recv_used;
+ if (start < RECV_BUF) {
+ /* copy data to end of buffer */
+ first_size = RECV_BUF - start;
+ if (first_size > size)
+ first_size = size;
+
+ memcpy(s->recv_buf + start, buf, first_size);
+
+ /* wrap around to front if needed */
+ if (size > first_size)
+ memcpy(s->recv_buf, buf + first_size, size - first_size);
+ } else {
+ start -= RECV_BUF;
+ memcpy(s->recv_buf + start, buf, size);
+ }
+ s->recv_used += size;
+}
+
+static void usb_serial_event(void *opaque, int event)
+{
+ USBSerialState *s = opaque;
+
+ switch (event) {
+ case CHR_EVENT_BREAK:
+ s->event_trigger |= FTDI_BI;
+ break;
+ case CHR_EVENT_FOCUS:
+ break;
+ case CHR_EVENT_OPENED:
+ if (!s->dev.attached) {
+ usb_device_attach(&s->dev, &error_abort);
+ }
+ break;
+ case CHR_EVENT_CLOSED:
+ if (s->dev.attached) {
+ usb_device_detach(&s->dev);
+ }
+ break;
+ }
+}
+
+static void usb_serial_realize(USBDevice *dev, Error **errp)
+{
+ USBSerialState *s = USB_SERIAL_DEV(dev);
+ Error *local_err = NULL;
+
+ usb_desc_create_serial(dev);
+ usb_desc_init(dev);
+ dev->auto_attach = 0;
+
+ if (!s->cs) {
+ error_setg(errp, "Property chardev is required");
+ return;
+ }
+
+ usb_check_attach(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ qemu_chr_add_handlers(s->cs, usb_serial_can_read, usb_serial_read,
+ usb_serial_event, s);
+ usb_serial_handle_reset(dev);
+
+ if (s->cs->be_open && !dev->attached) {
+ usb_device_attach(dev, &error_abort);
+ }
+}
+
+static USBDevice *usb_serial_init(USBBus *bus, const char *filename)
+{
+ USBDevice *dev;
+ CharDriverState *cdrv;
+ uint32_t vendorid = 0, productid = 0;
+ char label[32];
+ static int index;
+
+ while (*filename && *filename != ':') {
+ const char *p;
+ char *e;
+ if (strstart(filename, "vendorid=", &p)) {
+ vendorid = strtol(p, &e, 16);
+ if (e == p || (*e && *e != ',' && *e != ':')) {
+ error_report("bogus vendor ID %s", p);
+ return NULL;
+ }
+ filename = e;
+ } else if (strstart(filename, "productid=", &p)) {
+ productid = strtol(p, &e, 16);
+ if (e == p || (*e && *e != ',' && *e != ':')) {
+ error_report("bogus product ID %s", p);
+ return NULL;
+ }
+ filename = e;
+ } else {
+ error_report("unrecognized serial USB option %s", filename);
+ return NULL;
+ }
+ while(*filename == ',')
+ filename++;
+ }
+ if (!*filename) {
+ error_report("character device specification needed");
+ return NULL;
+ }
+ filename++;
+
+ snprintf(label, sizeof(label), "usbserial%d", index++);
+ cdrv = qemu_chr_new(label, filename, NULL);
+ if (!cdrv)
+ return NULL;
+
+ dev = usb_create(bus, "usb-serial");
+ qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
+ if (vendorid)
+ qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
+ if (productid)
+ qdev_prop_set_uint16(&dev->qdev, "productid", productid);
+ return dev;
+}
+
+static USBDevice *usb_braille_init(USBBus *bus, const char *unused)
+{
+ USBDevice *dev;
+ CharDriverState *cdrv;
+
+ cdrv = qemu_chr_new("braille", "braille", NULL);
+ if (!cdrv)
+ return NULL;
+
+ dev = usb_create(bus, "usb-braille");
+ qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
+ return dev;
+}
+
+static const VMStateDescription vmstate_usb_serial = {
+ .name = "usb-serial",
+ .unmigratable = 1,
+};
+
+static Property serial_properties[] = {
+ DEFINE_PROP_CHR("chardev", USBSerialState, cs),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usb_serial_dev_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+ uc->realize = usb_serial_realize;
+ uc->handle_reset = usb_serial_handle_reset;
+ uc->handle_control = usb_serial_handle_control;
+ uc->handle_data = usb_serial_handle_data;
+ dc->vmsd = &vmstate_usb_serial;
+ set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+}
+
+static const TypeInfo usb_serial_dev_type_info = {
+ .name = TYPE_USB_SERIAL,
+ .parent = TYPE_USB_DEVICE,
+ .instance_size = sizeof(USBSerialState),
+ .abstract = true,
+ .class_init = usb_serial_dev_class_init,
+};
+
+static void usb_serial_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+ uc->product_desc = "QEMU USB Serial";
+ uc->usb_desc = &desc_serial;
+ dc->props = serial_properties;
+}
+
+static const TypeInfo serial_info = {
+ .name = "usb-serial",
+ .parent = TYPE_USB_SERIAL,
+ .class_init = usb_serial_class_initfn,
+};
+
+static Property braille_properties[] = {
+ DEFINE_PROP_CHR("chardev", USBSerialState, cs),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usb_braille_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+ uc->product_desc = "QEMU USB Braille";
+ uc->usb_desc = &desc_braille;
+ dc->props = braille_properties;
+}
+
+static const TypeInfo braille_info = {
+ .name = "usb-braille",
+ .parent = TYPE_USB_SERIAL,
+ .class_init = usb_braille_class_initfn,
+};
+
+static void usb_serial_register_types(void)
+{
+ type_register_static(&usb_serial_dev_type_info);
+ type_register_static(&serial_info);
+ usb_legacy_register("usb-serial", "serial", usb_serial_init);
+ type_register_static(&braille_info);
+ usb_legacy_register("usb-braille", "braille", usb_braille_init);
+}
+
+type_init(usb_serial_register_types)