summaryrefslogtreecommitdiffstats
path: root/qemu/hw/pci/shpc.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/hw/pci/shpc.c')
-rw-r--r--qemu/hw/pci/shpc.c721
1 files changed, 721 insertions, 0 deletions
diff --git a/qemu/hw/pci/shpc.c b/qemu/hw/pci/shpc.c
new file mode 100644
index 000000000..bfb4d31b6
--- /dev/null
+++ b/qemu/hw/pci/shpc.c
@@ -0,0 +1,721 @@
+#include "qemu-common.h"
+#include <strings.h>
+#include <stdint.h>
+#include "qemu/range.h"
+#include "qemu/error-report.h"
+#include "hw/pci/shpc.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/msi.h"
+
+/* TODO: model power only and disabled slot states. */
+/* TODO: handle SERR and wakeups */
+/* TODO: consider enabling 66MHz support */
+
+/* TODO: remove fully only on state DISABLED and LED off.
+ * track state to properly record this. */
+
+/* SHPC Working Register Set */
+#define SHPC_BASE_OFFSET 0x00 /* 4 bytes */
+#define SHPC_SLOTS_33 0x04 /* 4 bytes. Also encodes PCI-X slots. */
+#define SHPC_SLOTS_66 0x08 /* 4 bytes. */
+#define SHPC_NSLOTS 0x0C /* 1 byte */
+#define SHPC_FIRST_DEV 0x0D /* 1 byte */
+#define SHPC_PHYS_SLOT 0x0E /* 2 byte */
+#define SHPC_PHYS_NUM_MAX 0x7ff
+#define SHPC_PHYS_NUM_UP 0x2000
+#define SHPC_PHYS_MRL 0x4000
+#define SHPC_PHYS_BUTTON 0x8000
+#define SHPC_SEC_BUS 0x10 /* 2 bytes */
+#define SHPC_SEC_BUS_33 0x0
+#define SHPC_SEC_BUS_66 0x1 /* Unused */
+#define SHPC_SEC_BUS_MASK 0x7
+#define SHPC_MSI_CTL 0x12 /* 1 byte */
+#define SHPC_PROG_IFC 0x13 /* 1 byte */
+#define SHPC_PROG_IFC_1_0 0x1
+#define SHPC_CMD_CODE 0x14 /* 1 byte */
+#define SHPC_CMD_TRGT 0x15 /* 1 byte */
+#define SHPC_CMD_TRGT_MIN 0x1
+#define SHPC_CMD_TRGT_MAX 0x1f
+#define SHPC_CMD_STATUS 0x16 /* 2 bytes */
+#define SHPC_CMD_STATUS_BUSY 0x1
+#define SHPC_CMD_STATUS_MRL_OPEN 0x2
+#define SHPC_CMD_STATUS_INVALID_CMD 0x4
+#define SHPC_CMD_STATUS_INVALID_MODE 0x8
+#define SHPC_INT_LOCATOR 0x18 /* 4 bytes */
+#define SHPC_INT_COMMAND 0x1
+#define SHPC_SERR_LOCATOR 0x1C /* 4 bytes */
+#define SHPC_SERR_INT 0x20 /* 4 bytes */
+#define SHPC_INT_DIS 0x1
+#define SHPC_SERR_DIS 0x2
+#define SHPC_CMD_INT_DIS 0x4
+#define SHPC_ARB_SERR_DIS 0x8
+#define SHPC_CMD_DETECTED 0x10000
+#define SHPC_ARB_DETECTED 0x20000
+ /* 4 bytes * slot # (start from 0) */
+#define SHPC_SLOT_REG(s) (0x24 + (s) * 4)
+ /* 2 bytes */
+#define SHPC_SLOT_STATUS(s) (0x0 + SHPC_SLOT_REG(s))
+
+/* Same slot state masks are used for command and status registers */
+#define SHPC_SLOT_STATE_MASK 0x03
+#define SHPC_SLOT_STATE_SHIFT \
+ ctz32(SHPC_SLOT_STATE_MASK)
+
+#define SHPC_STATE_NO 0x0
+#define SHPC_STATE_PWRONLY 0x1
+#define SHPC_STATE_ENABLED 0x2
+#define SHPC_STATE_DISABLED 0x3
+
+#define SHPC_SLOT_PWR_LED_MASK 0xC
+#define SHPC_SLOT_PWR_LED_SHIFT \
+ ctz32(SHPC_SLOT_PWR_LED_MASK)
+#define SHPC_SLOT_ATTN_LED_MASK 0x30
+#define SHPC_SLOT_ATTN_LED_SHIFT \
+ ctz32(SHPC_SLOT_ATTN_LED_MASK)
+
+#define SHPC_LED_NO 0x0
+#define SHPC_LED_ON 0x1
+#define SHPC_LED_BLINK 0x2
+#define SHPC_LED_OFF 0x3
+
+#define SHPC_SLOT_STATUS_PWR_FAULT 0x40
+#define SHPC_SLOT_STATUS_BUTTON 0x80
+#define SHPC_SLOT_STATUS_MRL_OPEN 0x100
+#define SHPC_SLOT_STATUS_66 0x200
+#define SHPC_SLOT_STATUS_PRSNT_MASK 0xC00
+#define SHPC_SLOT_STATUS_PRSNT_EMPTY 0x3
+#define SHPC_SLOT_STATUS_PRSNT_25W 0x1
+#define SHPC_SLOT_STATUS_PRSNT_15W 0x2
+#define SHPC_SLOT_STATUS_PRSNT_7_5W 0x0
+
+#define SHPC_SLOT_STATUS_PRSNT_PCIX 0x3000
+
+
+ /* 1 byte */
+#define SHPC_SLOT_EVENT_LATCH(s) (0x2 + SHPC_SLOT_REG(s))
+ /* 1 byte */
+#define SHPC_SLOT_EVENT_SERR_INT_DIS(d, s) (0x3 + SHPC_SLOT_REG(s))
+#define SHPC_SLOT_EVENT_PRESENCE 0x01
+#define SHPC_SLOT_EVENT_ISOLATED_FAULT 0x02
+#define SHPC_SLOT_EVENT_BUTTON 0x04
+#define SHPC_SLOT_EVENT_MRL 0x08
+#define SHPC_SLOT_EVENT_CONNECTED_FAULT 0x10
+/* Bits below are used for Serr/Int disable only */
+#define SHPC_SLOT_EVENT_MRL_SERR_DIS 0x20
+#define SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS 0x40
+
+#define SHPC_MIN_SLOTS 1
+#define SHPC_MAX_SLOTS 31
+#define SHPC_SIZEOF(d) SHPC_SLOT_REG((d)->shpc->nslots)
+
+/* SHPC Slot identifiers */
+
+/* Hotplug supported at 31 slots out of the total 32. We reserve slot 0,
+ and give the rest of them physical *and* pci numbers starting from 1, so
+ they match logical numbers. Note: this means that multiple slots must have
+ different chassis number values, to make chassis+physical slot unique.
+ TODO: make this configurable? */
+#define SHPC_IDX_TO_LOGICAL(slot) ((slot) + 1)
+#define SHPC_LOGICAL_TO_IDX(target) ((target) - 1)
+#define SHPC_IDX_TO_PCI(slot) ((slot) + 1)
+#define SHPC_PCI_TO_IDX(pci_slot) ((pci_slot) - 1)
+#define SHPC_IDX_TO_PHYSICAL(slot) ((slot) + 1)
+
+static int roundup_pow_of_two(int x)
+{
+ x |= (x >> 1);
+ x |= (x >> 2);
+ x |= (x >> 4);
+ x |= (x >> 8);
+ x |= (x >> 16);
+ return x + 1;
+}
+
+static uint16_t shpc_get_status(SHPCDevice *shpc, int slot, uint16_t msk)
+{
+ uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
+ return (pci_get_word(status) & msk) >> ctz32(msk);
+}
+
+static void shpc_set_status(SHPCDevice *shpc,
+ int slot, uint8_t value, uint16_t msk)
+{
+ uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
+ pci_word_test_and_clear_mask(status, msk);
+ pci_word_test_and_set_mask(status, value << ctz32(msk));
+}
+
+static void shpc_interrupt_update(PCIDevice *d)
+{
+ SHPCDevice *shpc = d->shpc;
+ int slot;
+ int level = 0;
+ uint32_t serr_int;
+ uint32_t int_locator = 0;
+
+ /* Update interrupt locator register */
+ for (slot = 0; slot < shpc->nslots; ++slot) {
+ uint8_t event = shpc->config[SHPC_SLOT_EVENT_LATCH(slot)];
+ uint8_t disable = shpc->config[SHPC_SLOT_EVENT_SERR_INT_DIS(d, slot)];
+ uint32_t mask = 1U << SHPC_IDX_TO_LOGICAL(slot);
+ if (event & ~disable) {
+ int_locator |= mask;
+ }
+ }
+ serr_int = pci_get_long(shpc->config + SHPC_SERR_INT);
+ if ((serr_int & SHPC_CMD_DETECTED) && !(serr_int & SHPC_CMD_INT_DIS)) {
+ int_locator |= SHPC_INT_COMMAND;
+ }
+ pci_set_long(shpc->config + SHPC_INT_LOCATOR, int_locator);
+ level = (!(serr_int & SHPC_INT_DIS) && int_locator) ? 1 : 0;
+ if (msi_enabled(d) && shpc->msi_requested != level)
+ msi_notify(d, 0);
+ else
+ pci_set_irq(d, level);
+ shpc->msi_requested = level;
+}
+
+static void shpc_set_sec_bus_speed(SHPCDevice *shpc, uint8_t speed)
+{
+ switch (speed) {
+ case SHPC_SEC_BUS_33:
+ shpc->config[SHPC_SEC_BUS] &= ~SHPC_SEC_BUS_MASK;
+ shpc->config[SHPC_SEC_BUS] |= speed;
+ break;
+ default:
+ pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_INVALID_MODE);
+ }
+}
+
+void shpc_reset(PCIDevice *d)
+{
+ SHPCDevice *shpc = d->shpc;
+ int nslots = shpc->nslots;
+ int i;
+ memset(shpc->config, 0, SHPC_SIZEOF(d));
+ pci_set_byte(shpc->config + SHPC_NSLOTS, nslots);
+ pci_set_long(shpc->config + SHPC_SLOTS_33, nslots);
+ pci_set_long(shpc->config + SHPC_SLOTS_66, 0);
+ pci_set_byte(shpc->config + SHPC_FIRST_DEV, SHPC_IDX_TO_PCI(0));
+ pci_set_word(shpc->config + SHPC_PHYS_SLOT,
+ SHPC_IDX_TO_PHYSICAL(0) |
+ SHPC_PHYS_NUM_UP |
+ SHPC_PHYS_MRL |
+ SHPC_PHYS_BUTTON);
+ pci_set_long(shpc->config + SHPC_SERR_INT, SHPC_INT_DIS |
+ SHPC_SERR_DIS |
+ SHPC_CMD_INT_DIS |
+ SHPC_ARB_SERR_DIS);
+ pci_set_byte(shpc->config + SHPC_PROG_IFC, SHPC_PROG_IFC_1_0);
+ pci_set_word(shpc->config + SHPC_SEC_BUS, SHPC_SEC_BUS_33);
+ for (i = 0; i < shpc->nslots; ++i) {
+ pci_set_byte(shpc->config + SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT |
+ SHPC_SLOT_EVENT_MRL_SERR_DIS |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
+ if (shpc->sec_bus->devices[PCI_DEVFN(SHPC_IDX_TO_PCI(i), 0)]) {
+ shpc_set_status(shpc, i, SHPC_STATE_ENABLED, SHPC_SLOT_STATE_MASK);
+ shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc_set_status(shpc, i, SHPC_LED_ON, SHPC_SLOT_PWR_LED_MASK);
+ } else {
+ shpc_set_status(shpc, i, SHPC_STATE_DISABLED, SHPC_SLOT_STATE_MASK);
+ shpc_set_status(shpc, i, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc_set_status(shpc, i, SHPC_LED_OFF, SHPC_SLOT_PWR_LED_MASK);
+ }
+ shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_66);
+ }
+ shpc_set_sec_bus_speed(shpc, SHPC_SEC_BUS_33);
+ shpc->msi_requested = 0;
+ shpc_interrupt_update(d);
+}
+
+static void shpc_invalid_command(SHPCDevice *shpc)
+{
+ pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_INVALID_CMD);
+}
+
+static void shpc_free_devices_in_slot(SHPCDevice *shpc, int slot)
+{
+ int devfn;
+ int pci_slot = SHPC_IDX_TO_PCI(slot);
+ for (devfn = PCI_DEVFN(pci_slot, 0);
+ devfn <= PCI_DEVFN(pci_slot, PCI_FUNC_MAX - 1);
+ ++devfn) {
+ PCIDevice *affected_dev = shpc->sec_bus->devices[devfn];
+ if (affected_dev) {
+ object_unparent(OBJECT(affected_dev));
+ }
+ }
+}
+
+static void shpc_slot_command(SHPCDevice *shpc, uint8_t target,
+ uint8_t state, uint8_t power, uint8_t attn)
+{
+ uint8_t current_state;
+ int slot = SHPC_LOGICAL_TO_IDX(target);
+ if (target < SHPC_CMD_TRGT_MIN || slot >= shpc->nslots) {
+ shpc_invalid_command(shpc);
+ return;
+ }
+ current_state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
+ if (current_state == SHPC_STATE_ENABLED && state == SHPC_STATE_PWRONLY) {
+ shpc_invalid_command(shpc);
+ return;
+ }
+
+ switch (power) {
+ case SHPC_LED_NO:
+ break;
+ default:
+ /* TODO: send event to monitor */
+ shpc_set_status(shpc, slot, power, SHPC_SLOT_PWR_LED_MASK);
+ }
+ switch (attn) {
+ case SHPC_LED_NO:
+ break;
+ default:
+ /* TODO: send event to monitor */
+ shpc_set_status(shpc, slot, attn, SHPC_SLOT_ATTN_LED_MASK);
+ }
+
+ if ((current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_PWRONLY) ||
+ (current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_ENABLED)) {
+ shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
+ } else if ((current_state == SHPC_STATE_ENABLED ||
+ current_state == SHPC_STATE_PWRONLY) &&
+ state == SHPC_STATE_DISABLED) {
+ shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
+ power = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
+ /* TODO: track what monitor requested. */
+ /* Look at LED to figure out whether it's ok to remove the device. */
+ if (power == SHPC_LED_OFF) {
+ shpc_free_devices_in_slot(shpc, slot);
+ shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ }
+ }
+}
+
+static void shpc_command(SHPCDevice *shpc)
+{
+ uint8_t code = pci_get_byte(shpc->config + SHPC_CMD_CODE);
+ uint8_t speed;
+ uint8_t target;
+ uint8_t attn;
+ uint8_t power;
+ uint8_t state;
+ int i;
+
+ /* Clear status from the previous command. */
+ pci_word_test_and_clear_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_BUSY |
+ SHPC_CMD_STATUS_MRL_OPEN |
+ SHPC_CMD_STATUS_INVALID_CMD |
+ SHPC_CMD_STATUS_INVALID_MODE);
+ switch (code) {
+ case 0x00 ... 0x3f:
+ target = shpc->config[SHPC_CMD_TRGT] & SHPC_CMD_TRGT_MAX;
+ state = (code & SHPC_SLOT_STATE_MASK) >> SHPC_SLOT_STATE_SHIFT;
+ power = (code & SHPC_SLOT_PWR_LED_MASK) >> SHPC_SLOT_PWR_LED_SHIFT;
+ attn = (code & SHPC_SLOT_ATTN_LED_MASK) >> SHPC_SLOT_ATTN_LED_SHIFT;
+ shpc_slot_command(shpc, target, state, power, attn);
+ break;
+ case 0x40 ... 0x47:
+ speed = code & SHPC_SEC_BUS_MASK;
+ shpc_set_sec_bus_speed(shpc, speed);
+ break;
+ case 0x48:
+ /* Power only all slots */
+ /* first verify no slots are enabled */
+ for (i = 0; i < shpc->nslots; ++i) {
+ state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
+ if (state == SHPC_STATE_ENABLED) {
+ shpc_invalid_command(shpc);
+ goto done;
+ }
+ }
+ for (i = 0; i < shpc->nslots; ++i) {
+ if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_PWRONLY, SHPC_LED_ON, SHPC_LED_NO);
+ } else {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
+ }
+ }
+ break;
+ case 0x49:
+ /* Enable all slots */
+ /* TODO: Spec says this shall fail if some are already enabled.
+ * This doesn't make sense - why not? a spec bug? */
+ for (i = 0; i < shpc->nslots; ++i) {
+ state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
+ if (state == SHPC_STATE_ENABLED) {
+ shpc_invalid_command(shpc);
+ goto done;
+ }
+ }
+ for (i = 0; i < shpc->nslots; ++i) {
+ if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_ENABLED, SHPC_LED_ON, SHPC_LED_NO);
+ } else {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
+ }
+ }
+ break;
+ default:
+ shpc_invalid_command(shpc);
+ break;
+ }
+done:
+ pci_long_test_and_set_mask(shpc->config + SHPC_SERR_INT, SHPC_CMD_DETECTED);
+}
+
+static void shpc_write(PCIDevice *d, unsigned addr, uint64_t val, int l)
+{
+ SHPCDevice *shpc = d->shpc;
+ int i;
+ if (addr >= SHPC_SIZEOF(d)) {
+ return;
+ }
+ l = MIN(l, SHPC_SIZEOF(d) - addr);
+
+ /* TODO: code duplicated from pci.c */
+ for (i = 0; i < l; val >>= 8, ++i) {
+ unsigned a = addr + i;
+ uint8_t wmask = shpc->wmask[a];
+ uint8_t w1cmask = shpc->w1cmask[a];
+ assert(!(wmask & w1cmask));
+ shpc->config[a] = (shpc->config[a] & ~wmask) | (val & wmask);
+ shpc->config[a] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+ }
+ if (ranges_overlap(addr, l, SHPC_CMD_CODE, 2)) {
+ shpc_command(shpc);
+ }
+ shpc_interrupt_update(d);
+}
+
+static uint64_t shpc_read(PCIDevice *d, unsigned addr, int l)
+{
+ uint64_t val = 0x0;
+ if (addr >= SHPC_SIZEOF(d)) {
+ return val;
+ }
+ l = MIN(l, SHPC_SIZEOF(d) - addr);
+ memcpy(&val, d->shpc->config + addr, l);
+ return val;
+}
+
+/* SHPC Bridge Capability */
+#define SHPC_CAP_LENGTH 0x08
+#define SHPC_CAP_DWORD_SELECT 0x2 /* 1 byte */
+#define SHPC_CAP_CxP 0x3 /* 1 byte: CSP, CIP */
+#define SHPC_CAP_DWORD_DATA 0x4 /* 4 bytes */
+#define SHPC_CAP_CSP_MASK 0x4
+#define SHPC_CAP_CIP_MASK 0x8
+
+static uint8_t shpc_cap_dword(PCIDevice *d)
+{
+ return pci_get_byte(d->config + d->shpc->cap + SHPC_CAP_DWORD_SELECT);
+}
+
+/* Update dword data capability register */
+static void shpc_cap_update_dword(PCIDevice *d)
+{
+ unsigned data;
+ data = shpc_read(d, shpc_cap_dword(d) * 4, 4);
+ pci_set_long(d->config + d->shpc->cap + SHPC_CAP_DWORD_DATA, data);
+}
+
+/* Add SHPC capability to the config space for the device. */
+static int shpc_cap_add_config(PCIDevice *d)
+{
+ uint8_t *config;
+ int config_offset;
+ config_offset = pci_add_capability(d, PCI_CAP_ID_SHPC,
+ 0, SHPC_CAP_LENGTH);
+ if (config_offset < 0) {
+ return config_offset;
+ }
+ config = d->config + config_offset;
+
+ pci_set_byte(config + SHPC_CAP_DWORD_SELECT, 0);
+ pci_set_byte(config + SHPC_CAP_CxP, 0);
+ pci_set_long(config + SHPC_CAP_DWORD_DATA, 0);
+ d->shpc->cap = config_offset;
+ /* Make dword select and data writeable. */
+ pci_set_byte(d->wmask + config_offset + SHPC_CAP_DWORD_SELECT, 0xff);
+ pci_set_long(d->wmask + config_offset + SHPC_CAP_DWORD_DATA, 0xffffffff);
+ return 0;
+}
+
+static uint64_t shpc_mmio_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ return shpc_read(opaque, addr, size);
+}
+
+static void shpc_mmio_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ shpc_write(opaque, addr, val, size);
+}
+
+static const MemoryRegionOps shpc_mmio_ops = {
+ .read = shpc_mmio_read,
+ .write = shpc_mmio_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ /* SHPC ECN requires dword accesses, but the original 1.0 spec doesn't.
+ * It's easier to suppport all sizes than worry about it. */
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot,
+ SHPCDevice *shpc, Error **errp)
+{
+ int pci_slot = PCI_SLOT(affected_dev->devfn);
+ *slot = SHPC_PCI_TO_IDX(pci_slot);
+
+ if (pci_slot < SHPC_IDX_TO_PCI(0) || *slot >= shpc->nslots) {
+ error_setg(errp, "Unsupported PCI slot %d for standard hotplug "
+ "controller. Valid slots are between %d and %d.",
+ pci_slot, SHPC_IDX_TO_PCI(0),
+ SHPC_IDX_TO_PCI(shpc->nslots) - 1);
+ return;
+ }
+}
+
+void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+ Error **errp)
+{
+ Error *local_err = NULL;
+ PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
+ SHPCDevice *shpc = pci_hotplug_dev->shpc;
+ int slot;
+
+ shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ /* Don't send event when device is enabled during qemu machine creation:
+ * it is present on boot, no hotplug event is necessary. We do send an
+ * event when the device is disabled later. */
+ if (!dev->hotplugged) {
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ return;
+ }
+
+ /* This could be a cancellation of the previous removal.
+ * We check MRL state to figure out. */
+ if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) {
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ } else {
+ /* Press attention button to cancel removal */
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON;
+ }
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
+ shpc_interrupt_update(pci_hotplug_dev);
+}
+
+void shpc_device_hot_unplug_request_cb(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ Error *local_err = NULL;
+ PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
+ SHPCDevice *shpc = pci_hotplug_dev->shpc;
+ uint8_t state;
+ uint8_t led;
+ int slot;
+
+ shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
+ state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
+ led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
+ if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) {
+ shpc_free_devices_in_slot(shpc, slot);
+ shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ }
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
+ shpc_interrupt_update(pci_hotplug_dev);
+}
+
+/* Initialize the SHPC structure in bridge's BAR. */
+int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
+{
+ int i, ret;
+ int nslots = SHPC_MAX_SLOTS; /* TODO: qdev property? */
+ SHPCDevice *shpc = d->shpc = g_malloc0(sizeof(*d->shpc));
+ shpc->sec_bus = sec_bus;
+ ret = shpc_cap_add_config(d);
+ if (ret) {
+ g_free(d->shpc);
+ return ret;
+ }
+ if (nslots < SHPC_MIN_SLOTS) {
+ return 0;
+ }
+ if (nslots > SHPC_MAX_SLOTS ||
+ SHPC_IDX_TO_PCI(nslots) > PCI_SLOT_MAX) {
+ /* TODO: report an error mesage that makes sense. */
+ return -EINVAL;
+ }
+ shpc->nslots = nslots;
+ shpc->config = g_malloc0(SHPC_SIZEOF(d));
+ shpc->cmask = g_malloc0(SHPC_SIZEOF(d));
+ shpc->wmask = g_malloc0(SHPC_SIZEOF(d));
+ shpc->w1cmask = g_malloc0(SHPC_SIZEOF(d));
+
+ shpc_reset(d);
+
+ pci_set_long(shpc->config + SHPC_BASE_OFFSET, offset);
+
+ pci_set_byte(shpc->wmask + SHPC_CMD_CODE, 0xff);
+ pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
+ pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
+ pci_set_long(shpc->wmask + SHPC_SERR_INT,
+ SHPC_INT_DIS |
+ SHPC_SERR_DIS |
+ SHPC_CMD_INT_DIS |
+ SHPC_ARB_SERR_DIS);
+ pci_set_long(shpc->w1cmask + SHPC_SERR_INT,
+ SHPC_CMD_DETECTED |
+ SHPC_ARB_DETECTED);
+ for (i = 0; i < nslots; ++i) {
+ pci_set_byte(shpc->wmask +
+ SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT |
+ SHPC_SLOT_EVENT_MRL_SERR_DIS |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
+ pci_set_byte(shpc->w1cmask +
+ SHPC_SLOT_EVENT_LATCH(i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT);
+ }
+
+ /* TODO: init cmask */
+ memory_region_init_io(&shpc->mmio, OBJECT(d), &shpc_mmio_ops,
+ d, "shpc-mmio", SHPC_SIZEOF(d));
+ shpc_cap_update_dword(d);
+ memory_region_add_subregion(bar, offset, &shpc->mmio);
+
+ qbus_set_hotplug_handler(BUS(sec_bus), DEVICE(d), NULL);
+
+ d->cap_present |= QEMU_PCI_CAP_SHPC;
+ return 0;
+}
+
+int shpc_bar_size(PCIDevice *d)
+{
+ return roundup_pow_of_two(SHPC_SLOT_REG(SHPC_MAX_SLOTS));
+}
+
+void shpc_cleanup(PCIDevice *d, MemoryRegion *bar)
+{
+ SHPCDevice *shpc = d->shpc;
+ d->cap_present &= ~QEMU_PCI_CAP_SHPC;
+ memory_region_del_subregion(bar, &shpc->mmio);
+ /* TODO: cleanup config space changes? */
+}
+
+void shpc_free(PCIDevice *d)
+{
+ SHPCDevice *shpc = d->shpc;
+ if (!shpc) {
+ return;
+ }
+ object_unparent(OBJECT(&shpc->mmio));
+ g_free(shpc->config);
+ g_free(shpc->cmask);
+ g_free(shpc->wmask);
+ g_free(shpc->w1cmask);
+ g_free(shpc);
+ d->shpc = NULL;
+}
+
+void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
+{
+ if (!ranges_overlap(addr, l, d->shpc->cap, SHPC_CAP_LENGTH)) {
+ return;
+ }
+ if (ranges_overlap(addr, l, d->shpc->cap + SHPC_CAP_DWORD_DATA, 4)) {
+ unsigned dword_data;
+ dword_data = pci_get_long(d->shpc->config + d->shpc->cap
+ + SHPC_CAP_DWORD_DATA);
+ shpc_write(d, shpc_cap_dword(d) * 4, dword_data, 4);
+ }
+ /* Update cap dword data in case guest is going to read it. */
+ shpc_cap_update_dword(d);
+}
+
+static void shpc_save(QEMUFile *f, void *pv, size_t size)
+{
+ PCIDevice *d = container_of(pv, PCIDevice, shpc);
+ qemu_put_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
+}
+
+static int shpc_load(QEMUFile *f, void *pv, size_t size)
+{
+ PCIDevice *d = container_of(pv, PCIDevice, shpc);
+ int ret = qemu_get_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
+ if (ret != SHPC_SIZEOF(d)) {
+ return -EINVAL;
+ }
+ /* Make sure we don't lose notifications. An extra interrupt is harmless. */
+ d->shpc->msi_requested = 0;
+ shpc_interrupt_update(d);
+ return 0;
+}
+
+VMStateInfo shpc_vmstate_info = {
+ .name = "shpc",
+ .get = shpc_load,
+ .put = shpc_save,
+};