diff options
Diffstat (limited to 'kernel/net/wireless/mesh.c')
-rw-r--r-- | kernel/net/wireless/mesh.c | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/kernel/net/wireless/mesh.c b/kernel/net/wireless/mesh.c new file mode 100644 index 000000000..092300b30 --- /dev/null +++ b/kernel/net/wireless/mesh.c @@ -0,0 +1,279 @@ +#include <linux/ieee80211.h> +#include <linux/export.h> +#include <net/cfg80211.h> +#include "nl80211.h" +#include "core.h" +#include "rdev-ops.h" + +/* Default values, timeouts in ms */ +#define MESH_TTL 31 +#define MESH_DEFAULT_ELEMENT_TTL 31 +#define MESH_MAX_RETR 3 +#define MESH_RET_T 100 +#define MESH_CONF_T 100 +#define MESH_HOLD_T 100 + +#define MESH_PATH_TIMEOUT 5000 +#define MESH_RANN_INTERVAL 5000 +#define MESH_PATH_TO_ROOT_TIMEOUT 6000 +#define MESH_ROOT_INTERVAL 5000 +#define MESH_ROOT_CONFIRMATION_INTERVAL 2000 +#define MESH_DEFAULT_PLINK_TIMEOUT 1800 /* timeout in seconds */ + +/* + * Minimum interval between two consecutive PREQs originated by the same + * interface + */ +#define MESH_PREQ_MIN_INT 10 +#define MESH_PERR_MIN_INT 100 +#define MESH_DIAM_TRAVERSAL_TIME 50 + +#define MESH_RSSI_THRESHOLD 0 + +/* + * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds + * before timing out. This way it will remain ACTIVE and no data frames + * will be unnecessarily held in the pending queue. + */ +#define MESH_PATH_REFRESH_TIME 1000 +#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) + +/* Default maximum number of established plinks per interface */ +#define MESH_MAX_ESTAB_PLINKS 32 + +#define MESH_MAX_PREQ_RETRIES 4 + +#define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50 + +#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */ +#define MESH_DEFAULT_DTIM_PERIOD 2 +#define MESH_DEFAULT_AWAKE_WINDOW 10 /* in 1024 us units (=TUs) */ + +const struct mesh_config default_mesh_config = { + .dot11MeshRetryTimeout = MESH_RET_T, + .dot11MeshConfirmTimeout = MESH_CONF_T, + .dot11MeshHoldingTimeout = MESH_HOLD_T, + .dot11MeshMaxRetries = MESH_MAX_RETR, + .dot11MeshTTL = MESH_TTL, + .element_ttl = MESH_DEFAULT_ELEMENT_TTL, + .auto_open_plinks = true, + .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS, + .dot11MeshNbrOffsetMaxNeighbor = MESH_SYNC_NEIGHBOR_OFFSET_MAX, + .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT, + .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT, + .dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT, + .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME, + .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES, + .path_refresh_time = MESH_PATH_REFRESH_TIME, + .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT, + .dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL, + .dot11MeshGateAnnouncementProtocol = false, + .dot11MeshForwarding = true, + .rssi_threshold = MESH_RSSI_THRESHOLD, + .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, + .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, + .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, + .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, + .power_mode = NL80211_MESH_POWER_ACTIVE, + .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW, + .plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT, +}; + +const struct mesh_setup default_mesh_setup = { + /* cfg80211_join_mesh() will pick a channel if needed */ + .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, + .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, + .path_metric = IEEE80211_PATH_METRIC_AIRTIME, + .auth_id = 0, /* open */ + .ie = NULL, + .ie_len = 0, + .is_secure = false, + .user_mpm = false, + .beacon_interval = MESH_DEFAULT_BEACON_INTERVAL, + .dtim_period = MESH_DEFAULT_DTIM_PERIOD, +}; + +int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + struct mesh_setup *setup, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) && + setup->is_secure) + return -EOPNOTSUPP; + + if (wdev->mesh_id_len) + return -EALREADY; + + if (!setup->mesh_id_len) + return -EINVAL; + + if (!rdev->ops->join_mesh) + return -EOPNOTSUPP; + + if (!setup->chandef.chan) { + /* if no channel explicitly given, use preset channel */ + setup->chandef = wdev->preset_chandef; + } + + if (!setup->chandef.chan) { + /* if we don't have that either, use the first usable channel */ + enum ieee80211_band band; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + int i; + + sband = rdev->wiphy.bands[band]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + if (chan->flags & (IEEE80211_CHAN_NO_IR | + IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR)) + continue; + setup->chandef.chan = chan; + break; + } + + if (setup->chandef.chan) + break; + } + + /* no usable channel ... */ + if (!setup->chandef.chan) + return -EINVAL; + + setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + setup->chandef.center_freq1 = setup->chandef.chan->center_freq; + } + + /* + * check if basic rates are available otherwise use mandatory rates as + * basic rates + */ + if (!setup->basic_rates) { + enum nl80211_bss_scan_width scan_width; + struct ieee80211_supported_band *sband = + rdev->wiphy.bands[setup->chandef.chan->band]; + scan_width = cfg80211_chandef_to_scan_width(&setup->chandef); + setup->basic_rates = ieee80211_mandatory_rates(sband, + scan_width); + } + + if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef, + NL80211_IFTYPE_MESH_POINT)) + return -EINVAL; + + err = rdev_join_mesh(rdev, dev, conf, setup); + if (!err) { + memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); + wdev->mesh_id_len = setup->mesh_id_len; + wdev->chandef = setup->chandef; + } + + return err; +} + +int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + struct mesh_setup *setup, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_join_mesh(rdev, dev, setup, conf); + wdev_unlock(wdev); + + return err; +} + +int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, + struct cfg80211_chan_def *chandef) +{ + int err; + + /* + * Workaround for libertas (only!), it puts the interface + * into mesh mode but doesn't implement join_mesh. Instead, + * it is configured via sysfs and then joins the mesh when + * you set the channel. Note that the libertas mesh isn't + * compatible with 802.11 mesh. + */ + if (rdev->ops->libertas_set_mesh_channel) { + if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT) + return -EINVAL; + + if (!netif_running(wdev->netdev)) + return -ENETDOWN; + + err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev, + chandef->chan); + if (!err) + wdev->chandef = *chandef; + + return err; + } + + if (wdev->mesh_id_len) + return -EBUSY; + + wdev->preset_chandef = *chandef; + return 0; +} + +int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!rdev->ops->leave_mesh) + return -EOPNOTSUPP; + + if (!wdev->mesh_id_len) + return -ENOTCONN; + + err = rdev_leave_mesh(rdev, dev); + if (!err) { + wdev->mesh_id_len = 0; + memset(&wdev->chandef, 0, sizeof(wdev->chandef)); + rdev_set_qos_map(rdev, dev, NULL); + } + + return err; +} + +int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_leave_mesh(rdev, dev); + wdev_unlock(wdev); + + return err; +} |