diff options
Diffstat (limited to 'kernel/include/linux/mtd/sh_flctl.h')
| -rw-r--r-- | kernel/include/linux/mtd/sh_flctl.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/kernel/include/linux/mtd/sh_flctl.h b/kernel/include/linux/mtd/sh_flctl.h new file mode 100644 index 000000000..1c28f8879 --- /dev/null +++ b/kernel/include/linux/mtd/sh_flctl.h @@ -0,0 +1,192 @@ +/* + * SuperH FLCTL nand controller + * + * Copyright © 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __SH_FLCTL_H__ +#define __SH_FLCTL_H__ + +#include <linux/completion.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/pm_qos.h> + +/* FLCTL registers */ +#define FLCMNCR(f) (f->reg + 0x0) +#define FLCMDCR(f) (f->reg + 0x4) +#define FLCMCDR(f) (f->reg + 0x8) +#define FLADR(f) (f->reg + 0xC) +#define FLADR2(f) (f->reg + 0x3C) +#define FLDATAR(f) (f->reg + 0x10) +#define FLDTCNTR(f) (f->reg + 0x14) +#define FLINTDMACR(f) (f->reg + 0x18) +#define FLBSYTMR(f) (f->reg + 0x1C) +#define FLBSYCNT(f) (f->reg + 0x20) +#define FLDTFIFO(f) (f->reg + 0x24) +#define FLECFIFO(f) (f->reg + 0x28) +#define FLTRCR(f) (f->reg + 0x2C) +#define FLHOLDCR(f) (f->reg + 0x38) +#define FL4ECCRESULT0(f) (f->reg + 0x80) +#define FL4ECCRESULT1(f) (f->reg + 0x84) +#define FL4ECCRESULT2(f) (f->reg + 0x88) +#define FL4ECCRESULT3(f) (f->reg + 0x8C) +#define FL4ECCCR(f) (f->reg + 0x90) +#define FL4ECCCNT(f) (f->reg + 0x94) +#define FLERRADR(f) (f->reg + 0x98) + +/* FLCMNCR control bits */ +#define _4ECCCNTEN (0x1 << 24) +#define _4ECCEN (0x1 << 23) +#define _4ECCCORRECT (0x1 << 22) +#define SHBUSSEL (0x1 << 20) +#define SEL_16BIT (0x1 << 19) +#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/ +#define QTSEL_E (0x1 << 17) +#define ENDIAN (0x1 << 16) /* 1 = little endian */ +#define FCKSEL_E (0x1 << 15) +#define ACM_SACCES_MODE (0x01 << 10) +#define NANWF_E (0x1 << 9) +#define SE_D (0x1 << 8) /* Spare area disable */ +#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */ +#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */ +#define TYPESEL_SET (0x1 << 0) + +/* + * Clock settings using the PULSEx registers from FLCMNCR + * + * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E + * to control the clock divider used between the High-Speed Peripheral Clock + * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit + * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16 + * bit version the divider is seperate for the pulse width of high and low + * signals. + */ +#define PULSE3 (0x1 << 27) +#define PULSE2 (0x1 << 17) +#define PULSE1 (0x1 << 15) +#define PULSE0 (0x1 << 9) +#define CLK_8B_0_5 PULSE1 +#define CLK_8B_1 0x0 +#define CLK_8B_1_5 (PULSE1 | PULSE2) +#define CLK_8B_2 PULSE0 +#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2) +#define CLK_8B_4 (PULSE0 | PULSE2) +#define CLK_16B_6L_2H PULSE0 +#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2) +#define CLK_16B_12L_4H (PULSE0 | PULSE2) + +/* FLCMDCR control bits */ +#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */ +#define ADRMD_E (0x1 << 26) /* Sector address access */ +#define CDSRC_E (0x1 << 25) /* Data buffer selection */ +#define DOSR_E (0x1 << 24) /* Status read check */ +#define SELRW (0x1 << 21) /* 0:read 1:write */ +#define DOADR_E (0x1 << 20) /* Address stage execute */ +#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */ +#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */ +#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */ +#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */ +#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */ +#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */ + +/* FLINTDMACR control bits */ +#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */ +#define AC1CLR (0x1 << 19) /* ECC FIFO clear */ +#define AC0CLR (0x1 << 18) /* Data FIFO clear */ +#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */ +#define ECERB (0x1 << 9) /* ECC error */ +#define STERB (0x1 << 8) /* Status error */ +#define STERINTE (0x1 << 4) /* Status error enable */ + +/* FLTRCR control bits */ +#define TRSTRT (0x1 << 0) /* translation start */ +#define TREND (0x1 << 1) /* translation end */ + +/* + * FLHOLDCR control bits + * + * HOLDEN: Bus Occupancy Enable (inverted) + * Enable this bit when the external bus might be used in between transfers. + * If not set and the bus gets used by other modules, a deadlock occurs. + */ +#define HOLDEN (0x1 << 0) + +/* FL4ECCCR control bits */ +#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */ +#define _4ECCEND (0x1 << 1) /* 4 symbols end */ +#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */ + +#define LOOP_TIMEOUT_MAX 0x00010000 + +enum flctl_ecc_res_t { + FL_SUCCESS, + FL_REPAIRABLE, + FL_ERROR, + FL_TIMEOUT +}; + +struct dma_chan; + +struct sh_flctl { + struct mtd_info mtd; + struct nand_chip chip; + struct platform_device *pdev; + struct dev_pm_qos_request pm_qos; + void __iomem *reg; + + uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ + int read_bytes; + unsigned int index; + int seqin_column; /* column in SEQIN cmd */ + int seqin_page_addr; /* page_addr in SEQIN cmd */ + uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */ + int erase1_page_addr; /* page_addr in ERASE1 cmd */ + uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */ + uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */ + uint32_t flcmncr_base; /* base value of FLCMNCR */ + uint32_t flintdmacr_base; /* irq enable bits */ + + unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ + unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ + unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ + unsigned qos_request:1; /* QoS request to prevent deep power shutdown */ + + /* DMA related objects */ + struct dma_chan *chan_fifo0_rx; + struct dma_chan *chan_fifo0_tx; + struct completion dma_complete; +}; + +struct sh_flctl_platform_data { + struct mtd_partition *parts; + int nr_parts; + unsigned long flcmncr_val; + + unsigned has_hwecc:1; + unsigned use_holden:1; + + unsigned int slave_id_fifo0_tx; + unsigned int slave_id_fifo0_rx; +}; + +static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) +{ + return container_of(mtdinfo, struct sh_flctl, mtd); +} + +#endif /* __SH_FLCTL_H__ */ |