diff options
Diffstat (limited to 'kernel/include/linux/com20020.h')
| -rw-r--r-- | kernel/include/linux/com20020.h | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/kernel/include/linux/com20020.h b/kernel/include/linux/com20020.h deleted file mode 100644 index 85898995b..000000000 --- a/kernel/include/linux/com20020.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Linux ARCnet driver - COM20020 chipset support - function declarations - * - * Written 1997 by David Woodhouse. - * Written 1994-1999 by Avery Pennarun. - * Derived from skeleton.c by Donald Becker. - * - * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) - * for sponsoring the further development of this driver. - * - * ********************** - * - * The original copyright of skeleton.c was as follows: - * - * skeleton.c Written 1993 by Donald Becker. - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. This software may only be used - * and distributed according to the terms of the GNU General Public License as - * modified by SRC, incorporated herein by reference. - * - * ********************** - * - * For more details, see drivers/net/arcnet.c - * - * ********************** - */ -#ifndef __COM20020_H -#define __COM20020_H - -int com20020_check(struct net_device *dev); -int com20020_found(struct net_device *dev, int shared); -extern const struct net_device_ops com20020_netdev_ops; - -/* The number of low I/O ports used by the card. */ -#define ARCNET_TOTAL_SIZE 8 - -/* various register addresses */ -#ifdef CONFIG_SA1100_CT6001 -#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ -#else -#define BUS_ALIGN 1 -#endif - -#define PLX_PCI_MAX_CARDS 2 - -struct com20020_pci_channel_map { - u32 bar; - u32 offset; - u32 size; /* 0x00 - auto, e.g. length of entire bar */ -}; - -struct com20020_pci_card_info { - const char *name; - int devcount; - - struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS]; - - unsigned int flags; -}; - -struct com20020_priv { - struct com20020_pci_card_info *ci; - struct list_head list_dev; -}; - -struct com20020_dev { - struct list_head list; - struct net_device *dev; - - struct com20020_priv *pci_priv; - int index; -}; - -#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */ -#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */ -#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */ -#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */ -#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */ -#define _ADDR_LO (ioaddr+BUS_ALIGN*3) -#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */ -#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */ -#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */ -#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG - or _SUBADR) */ - -/* in the ADDR_HI register */ -#define RDDATAflag 0x80 /* next access is a read (not a write) */ - -/* in the DIAGSTAT register */ -#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */ - -/* in the CONFIG register */ -#define RESETcfg 0x80 /* put card in reset state */ -#define TXENcfg 0x20 /* enable TX */ - -/* in SETUP register */ -#define PROMISCset 0x10 /* enable RCV_ALL */ -#define P1MODE 0x80 /* enable P1-MODE for Backplane */ -#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */ - -/* COM2002x */ -#define SUB_TENTATIVE 0 /* tentative node ID */ -#define SUB_NODE 1 /* node ID */ -#define SUB_SETUP1 2 /* various options */ -#define SUB_TEST 3 /* test/diag register */ - -/* COM20022 only */ -#define SUB_SETUP2 4 /* sundry options */ -#define SUB_BUSCTL 5 /* bus control options */ -#define SUB_DMACOUNT 6 /* DMA count options */ - -#define SET_SUBADR(x) do { \ - if ((x) < 4) \ - { \ - lp->config = (lp->config & ~0x03) | (x); \ - SETCONF; \ - } \ - else \ - { \ - outb(x, _SUBADR); \ - } \ -} while (0) - -#undef ARCRESET -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \ - udelay(5); \ - outb(lp->config , _CONFIG); \ - } -#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \ - udelay(5); \ - outb(0x18 , _CONFIG); \ - } - -#define ASTATUS() inb(_STATUS) -#define ADIAGSTATUS() inb(_DIAGSTAT) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) - -#define SETCONF outb(lp->config, _CONFIG) - -#endif /* __COM20020_H */ |